diff options
Diffstat (limited to 'Documentation/admin-guide/hw-vuln/srso.rst')
| -rw-r--r-- | Documentation/admin-guide/hw-vuln/srso.rst | 108 |
1 files changed, 100 insertions, 8 deletions
diff --git a/Documentation/admin-guide/hw-vuln/srso.rst b/Documentation/admin-guide/hw-vuln/srso.rst index b6cfb51cb0b4..66af95251a3d 100644 --- a/Documentation/admin-guide/hw-vuln/srso.rst +++ b/Documentation/admin-guide/hw-vuln/srso.rst @@ -46,12 +46,22 @@ The possible values in this file are: The processor is not vulnerable - * 'Vulnerable: no microcode': +* 'Vulnerable': + + The processor is vulnerable and no mitigations have been applied. + + * 'Vulnerable: No microcode': The processor is vulnerable, no microcode extending IBPB functionality to address the vulnerability has been applied. - * 'Mitigation: microcode': + * 'Vulnerable: Safe RET, no microcode': + + The "Safe RET" mitigation (see below) has been applied to protect the + kernel, but the IBPB-extending microcode has not been applied. User + space tasks may still be vulnerable. + + * 'Vulnerable: Microcode, no safe RET': Extended IBPB functionality microcode patch has been applied. It does not address User->Kernel and Guest->Host transitions protection but it @@ -72,11 +82,11 @@ The possible values in this file are: (spec_rstack_overflow=microcode) - * 'Mitigation: safe RET': + * 'Mitigation: Safe RET': - Software-only mitigation. It complements the extended IBPB microcode - patch functionality by addressing User->Kernel and Guest->Host - transitions protection. + Combined microcode/software mitigation. It complements the + extended IBPB microcode patch functionality by addressing + User->Kernel and Guest->Host transitions protection. Selected by default or by spec_rstack_overflow=safe-ret @@ -94,7 +104,20 @@ The possible values in this file are: (spec_rstack_overflow=ibpb-vmexit) + * 'Mitigation: Reduced Speculation': + This mitigation gets automatically enabled when the above one "IBPB on + VMEXIT" has been selected and the CPU supports the BpSpecReduce bit. + + It gets automatically enabled on machines which have the + SRSO_USER_KERNEL_NO=1 CPUID bit. In that case, the code logic is to switch + to the above =ibpb-vmexit mitigation because the user/kernel boundary is + not affected anymore and thus "safe RET" is not needed. + + After enabling the IBPB on VMEXIT mitigation option, the BpSpecReduce bit + is detected (functionality present on all such machines) and that + practically overrides IBPB on VMEXIT as it has a lot less performance + impact and takes care of the guest->host attack vector too. In order to exploit vulnerability, an attacker needs to: @@ -125,11 +148,11 @@ and does not want to suffer the performance impact, one can always disable the mitigation with spec_rstack_overflow=off. Similarly, 'Mitigation: IBPB' is another full mitigation type employing -an indrect branch prediction barrier after having applied the required +an indirect branch prediction barrier after having applied the required microcode patch for one's system. This mitigation comes also at a performance cost. -Mitigation: safe RET +Mitigation: Safe RET -------------------- The mitigation works by ensuring all RET instructions speculate to @@ -148,3 +171,72 @@ poisoned BTB entry and using that safe one for all function returns. In older Zen1 and Zen2, this is accomplished using a reinterpretation technique similar to Retbleed one: srso_untrain_ret() and srso_safe_ret(). + +Checking the safe RET mitigation actually works +----------------------------------------------- + +In case one wants to validate whether the SRSO safe RET mitigation works +on a kernel, one could use two performance counters + +* PMC_0xc8 - Count of RET/RET lw retired +* PMC_0xc9 - Count of RET/RET lw retired mispredicted + +and compare the number of RETs retired properly vs those retired +mispredicted, in kernel mode. Another way of specifying those events +is:: + + # perf list ex_ret_near_ret + + List of pre-defined events (to be used in -e or -M): + + core: + ex_ret_near_ret + [Retired Near Returns] + ex_ret_near_ret_mispred + [Retired Near Returns Mispredicted] + +Either the command using the event mnemonics:: + + # perf stat -e ex_ret_near_ret:k -e ex_ret_near_ret_mispred:k sleep 10s + +or using the raw PMC numbers:: + + # perf stat -e cpu/event=0xc8,umask=0/k -e cpu/event=0xc9,umask=0/k sleep 10s + +should give the same amount. I.e., every RET retired should be +mispredicted:: + + [root@brent: ~/kernel/linux/tools/perf> ./perf stat -e cpu/event=0xc8,umask=0/k -e cpu/event=0xc9,umask=0/k sleep 10s + + Performance counter stats for 'sleep 10s': + + 137,167 cpu/event=0xc8,umask=0/k + 137,173 cpu/event=0xc9,umask=0/k + + 10.004110303 seconds time elapsed + + 0.000000000 seconds user + 0.004462000 seconds sys + +vs the case when the mitigation is disabled (spec_rstack_overflow=off) +or not functioning properly, showing usually a lot smaller number of +mispredicted retired RETs vs the overall count of retired RETs during +a workload:: + + [root@brent: ~/kernel/linux/tools/perf> ./perf stat -e cpu/event=0xc8,umask=0/k -e cpu/event=0xc9,umask=0/k sleep 10s + + Performance counter stats for 'sleep 10s': + + 201,627 cpu/event=0xc8,umask=0/k + 4,074 cpu/event=0xc9,umask=0/k + + 10.003267252 seconds time elapsed + + 0.002729000 seconds user + 0.000000000 seconds sys + +Also, there is a selftest which performs the above, go to +tools/testing/selftests/x86/ and do:: + + make srso + ./srso |