summaryrefslogtreecommitdiff
path: root/Documentation/admin-guide
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/admin-guide')
-rw-r--r--Documentation/admin-guide/pm/cpuidle.rst104
1 files changed, 96 insertions, 8 deletions
diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst
index 106379e2619f..9c58b35a81cb 100644
--- a/Documentation/admin-guide/pm/cpuidle.rst
+++ b/Documentation/admin-guide/pm/cpuidle.rst
@@ -155,14 +155,14 @@ governor uses that information depends on what algorithm is implemented by it
and that is the primary reason for having more than one governor in the
``CPUIdle`` subsystem.
-There are two ``CPUIdle`` governors available, ``menu`` and ``ladder``. Which
-of them is used depends on the configuration of the kernel and in particular on
-whether or not the scheduler tick can be `stopped by the idle
-loop <idle-cpus-and-tick_>`_. It is possible to change the governor at run time
-if the ``cpuidle_sysfs_switch`` command line parameter has been passed to the
-kernel, but that is not safe in general, so it should not be done on production
-systems (that may change in the future, though). The name of the ``CPUIdle``
-governor currently used by the kernel can be read from the
+There are three ``CPUIdle`` governors available, ``menu``, `TEO <teo-gov_>`_
+and ``ladder``. Which of them is used by default depends on the configuration
+of the kernel and in particular on whether or not the scheduler tick can be
+`stopped by the idle loop <idle-cpus-and-tick_>`_. It is possible to change the
+governor at run time if the ``cpuidle_sysfs_switch`` command line parameter has
+been passed to the kernel, but that is not safe in general, so it should not be
+done on production systems (that may change in the future, though). The name of
+the ``CPUIdle`` governor currently used by the kernel can be read from the
:file:`current_governor_ro` (or :file:`current_governor` if
``cpuidle_sysfs_switch`` is present in the kernel command line) file under
:file:`/sys/devices/system/cpu/cpuidle/` in ``sysfs``.
@@ -256,6 +256,8 @@ the ``menu`` governor by default and if it is not tickless, the default
``CPUIdle`` governor on it will be ``ladder``.
+.. _menu-gov:
+
The ``menu`` Governor
=====================
@@ -333,6 +335,92 @@ that time, the governor may need to select a shallower state with a suitable
target residency.
+.. _teo-gov:
+
+The Timer Events Oriented (TEO) Governor
+========================================
+
+The timer events oriented (TEO) governor is an alternative ``CPUIdle`` governor
+for tickless systems. It follows the same basic strategy as the ``menu`` `one
+<menu-gov_>`_: it always tries to find the deepest idle state suitable for the
+given conditions. However, it applies a different approach to that problem.
+
+First, it does not use sleep length correction factors, but instead it attempts
+to correlate the observed idle duration values with the available idle states
+and use that information to pick up the idle state that is most likely to
+"match" the upcoming CPU idle interval. Second, it does not take the tasks
+that were running on the given CPU in the past and are waiting on some I/O
+operations to complete now at all (there is no guarantee that they will run on
+the same CPU when they become runnable again) and the pattern detection code in
+it avoids taking timer wakeups into account. It also only uses idle duration
+values less than the current time till the closest timer (with the scheduler
+tick excluded) for that purpose.
+
+Like in the ``menu`` governor `case <menu-gov_>`_, the first step is to obtain
+the *sleep length*, which is the time until the closest timer event with the
+assumption that the scheduler tick will be stopped (that also is the upper bound
+on the time until the next CPU wakeup). That value is then used to preselect an
+idle state on the basis of three metrics maintained for each idle state provided
+by the ``CPUIdle`` driver: ``hits``, ``misses`` and ``early_hits``.
+
+The ``hits`` and ``misses`` metrics measure the likelihood that a given idle
+state will "match" the observed (post-wakeup) idle duration if it "matches" the
+sleep length. They both are subject to decay (after a CPU wakeup) every time
+the target residency of the idle state corresponding to them is less than or
+equal to the sleep length and the target residency of the next idle state is
+greater than the sleep length (that is, when the idle state corresponding to
+them "matches" the sleep length). The ``hits`` metric is increased if the
+former condition is satisfied and the target residency of the given idle state
+is less than or equal to the observed idle duration and the target residency of
+the next idle state is greater than the observed idle duration at the same time
+(that is, it is increased when the given idle state "matches" both the sleep
+length and the observed idle duration). In turn, the ``misses`` metric is
+increased when the given idle state "matches" the sleep length only and the
+observed idle duration is too short for its target residency.
+
+The ``early_hits`` metric measures the likelihood that a given idle state will
+"match" the observed (post-wakeup) idle duration if it does not "match" the
+sleep length. It is subject to decay on every CPU wakeup and it is increased
+when the idle state corresponding to it "matches" the observed (post-wakeup)
+idle duration and the target residency of the next idle state is less than or
+equal to the sleep length (i.e. the idle state "matching" the sleep length is
+deeper than the given one).
+
+The governor walks the list of idle states provided by the ``CPUIdle`` driver
+and finds the last (deepest) one with the target residency less than or equal
+to the sleep length. Then, the ``hits`` and ``misses`` metrics of that idle
+state are compared with each other and it is preselected if the ``hits`` one is
+greater (which means that that idle state is likely to "match" the observed idle
+duration after CPU wakeup). If the ``misses`` one is greater, the governor
+preselects the shallower idle state with the maximum ``early_hits`` metric
+(or if there are multiple shallower idle states with equal ``early_hits``
+metric which also is the maximum, the shallowest of them will be preselected).
+[If there is a wakeup latency constraint coming from the `PM QoS framework
+<cpu-pm-qos_>`_ which is hit before reaching the deepest idle state with the
+target residency within the sleep length, the deepest idle state with the exit
+latency within the constraint is preselected without consulting the ``hits``,
+``misses`` and ``early_hits`` metrics.]
+
+Next, the governor takes several idle duration values observed most recently
+into consideration and if at least a half of them are greater than or equal to
+the target residency of the preselected idle state, that idle state becomes the
+final candidate to ask for. Otherwise, the average of the most recent idle
+duration values below the target residency of the preselected idle state is
+computed and the governor walks the idle states shallower than the preselected
+one and finds the deepest of them with the target residency within that average.
+That idle state is then taken as the final candidate to ask for.
+
+Still, at this point the governor may need to refine the idle state selection if
+it has not decided to `stop the scheduler tick <idle-cpus-and-tick_>`_. That
+generally happens if the target residency of the idle state selected so far is
+less than the tick period and the tick has not been stopped already (in a
+previous iteration of the idle loop). Then, like in the ``menu`` governor
+`case <menu-gov_>`_, the sleep length used in the previous computations may not
+reflect the real time until the closest timer event and if it really is greater
+than that time, a shallower state with a suitable target residency may need to
+be selected.
+
+
.. _idle-states-representation:
Representation of Idle States