summaryrefslogtreecommitdiff
path: root/Documentation/arm/sa1100/graphicsmaster.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/arm/sa1100/graphicsmaster.rst')
-rw-r--r--Documentation/arm/sa1100/graphicsmaster.rst60
1 files changed, 60 insertions, 0 deletions
diff --git a/Documentation/arm/sa1100/graphicsmaster.rst b/Documentation/arm/sa1100/graphicsmaster.rst
new file mode 100644
index 000000000000..e39892514f0c
--- /dev/null
+++ b/Documentation/arm/sa1100/graphicsmaster.rst
@@ -0,0 +1,60 @@
+========================================
+ADS GraphicsMaster Single Board Computer
+========================================
+
+For more details, contact Applied Data Systems or see
+http://www.applieddata.net/products.html
+
+The original Linux support for this product has been provided by
+Nicolas Pitre <nico@fluxnic.net>. Continued development work by
+Woojung Huh <whuh@applieddata.net>
+
+Use 'make graphicsmaster_config' before any 'make config'.
+This will set up defaults for GraphicsMaster support.
+
+The kernel zImage is linked to be loaded and executed at 0xc0400000.
+
+Linux can be used with the ADS BootLoader that ships with the
+newer rev boards. See their documentation on how to load Linux.
+
+Supported peripherals
+=====================
+
+- SA1100 LCD frame buffer (8/16bpp...sort of)
+- SA1111 USB Master
+- on-board SMC 92C96 ethernet NIC
+- SA1100 serial port
+- flash memory access (MTD/JFFS)
+- pcmcia, compact flash
+- touchscreen(ucb1200)
+- ps/2 keyboard
+- console on LCD screen
+- serial ports (ttyS[0-2])
+ - ttyS0 is default for serial console
+- Smart I/O (ADC, keypad, digital inputs, etc)
+ See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
+ and example user space code. ps/2 keybd is multiplexed through this driver
+
+To do
+=====
+
+- everything else! :-)
+
+Notes
+=====
+
+- The flash on board is divided into 3 partitions. mtd0 is where
+ the zImage is stored. It's been marked as read-only to keep you
+ from blasting over the bootloader. :) mtd1 is
+ for the ramdisk.gz image. mtd2 is user flash space and can be
+ utilized for either JFFS or if you're feeling crazy, running ext2
+ on top of it. If you're not using the ADS bootloader, you're
+ welcome to blast over the mtd1 partition also.
+
+- 16bpp mode requires a different cable than what ships with the board.
+ Contact ADS or look through the manual to wire your own. Currently,
+ if you compile with 16bit mode support and switch into a lower bpp
+ mode, the timing is off so the image is corrupted. This will be
+ fixed soon.
+
+Any contribution can be sent to nico@fluxnic.net and will be greatly welcome!