diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml | 354 |
1 files changed, 354 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml new file mode 100644 index 000000000000..f17bb353f65e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -0,0 +1,354 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra Power Management Controller (PMC) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jonathan Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra20-pmc + - nvidia,tegra20-pmc + - nvidia,tegra30-pmc + - nvidia,tegra114-pmc + - nvidia,tegra124-pmc + - nvidia,tegra210-pmc + + reg: + maxItems: 1 + description: + Offset and length of the register set for the device. + + clock-names: + items: + - const: pclk + - const: clk32k_in + description: + Must includes entries pclk and clk32k_in. + pclk is the Tegra clock of that name and clk32k_in is 32KHz clock + input to Tegra. + + clocks: + maxItems: 2 + description: + Must contain an entry for each entry in clock-names. + See ../clocks/clocks-bindings.txt for details. + + '#clock-cells': + const: 1 + description: + Tegra PMC has clk_out_1, clk_out_2, and clk_out_3. + PMC also has blink control which allows 32Khz clock output to + Tegra blink pad. + Consumer of PMC clock should specify the desired clock by having + the clock ID in its "clocks" phandle cell with pmc clock provider. + See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC + clock IDs. + + '#interrupt-cells': + const: 2 + description: + Specifies number of cells needed to encode an interrupt source. + The value must be 2. + + interrupt-controller: true + + nvidia,invert-interrupt: + $ref: /schemas/types.yaml#/definitions/flag + description: Inverts the PMU interrupt signal. + The PMU is an external Power Management Unit, whose interrupt output + signal is fed into the PMC. This signal is optionally inverted, and + then fed into the ARM GIC. The PMC is not involved in the detection + or handling of this interrupt signal, merely its inversion. + + nvidia,core-power-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: Core power request active-high. + + nvidia,sys-clock-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: System clock request active-high. + + nvidia,combined-power-req: + $ref: /schemas/types.yaml#/definitions/flag + description: combined power request for CPU and Core. + + nvidia,cpu-pwr-good-en: + $ref: /schemas/types.yaml#/definitions/flag + description: + CPU power good signal from external PMIC to PMC is enabled. + + nvidia,suspend-mode: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 2] + description: + The suspend mode that the platform should use. + Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh + Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh + Mode 2 is for LP2, CPU voltage off + + nvidia,cpu-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power good time in uSec. + + nvidia,cpu-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power off time in uSec. + + nvidia,core-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + <Oscillator-stable-time Power-stable-time> + Core power good time in uSec. + + nvidia,core-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Core power off time in uSec. + + nvidia,lp0-vec: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + <start length> Starting address and length of LP0 vector. + The LP0 vector contains the warm boot code that is executed + by AVP when resuming from the LP0 state. + The AVP (Audio-Video Processor) is an ARM7 processor and + always being the first boot processor when chip is power on + or resume from deep sleep mode. When the system is resumed + from the deep sleep mode, the warm boot code will restore + some PLLs, clocks and then brings up CPU0 for resuming the + system. + + i2c-thermtrip: + type: object + description: + On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists, + hardware-triggered thermal reset will be enabled. + + properties: + nvidia,i2c-controller-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + ID of I2C controller to send poweroff command to PMU. + Valid values are described in section 9.2.148 + "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference + Manual. + + nvidia,bus-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Bus address of the PMU on the I2C bus. + + nvidia,reg-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: PMU I2C register address to issue poweroff command. + + nvidia,reg-data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Poweroff command to write to PMU. + + nvidia,pinmux-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Pinmux used by the hardware when issuing Poweroff command. + Defaults to 0. Valid values are described in section 12.5.2 + "Pinmux Support" of the Tegra4 Technical Reference Manual. + + required: + - nvidia,i2c-controller-id + - nvidia,bus-addr + - nvidia,reg-addr + - nvidia,reg-data + + additionalProperties: false + + powergates: + type: object + description: | + This node contains a hierarchy of power domain nodes, which should + match the powergates on the Tegra SoC. Each powergate node + represents a power-domain on the Tegra SoC that can be power-gated + by the Tegra PMC. + Hardware blocks belonging to a power domain should contain + "power-domains" property that is a phandle pointing to corresponding + powergate node. + The name of the powergate node should be one of the below. Note that + not every powergate is applicable to all Tegra devices and the following + list shows which powergates are applicable to which devices. + Please refer to Tegra TRM for mode details on the powergate nodes to + use for each power-gate block inside Tegra. + Name Description Devices Applicable + 3d 3D Graphics Tegra20/114/124/210 + 3d0 3D Graphics 0 Tegra30 + 3d1 3D Graphics 1 Tegra30 + aud Audio Tegra210 + dfd Debug Tegra210 + dis Display A Tegra114/124/210 + disb Display B Tegra114/124/210 + heg 2D Graphics Tegra30/114/124/210 + iram Internal RAM Tegra124/210 + mpe MPEG Encode All + nvdec NVIDIA Video Decode Engine Tegra210 + nvjpg NVIDIA JPEG Engine Tegra210 + pcie PCIE Tegra20/30/124/210 + sata SATA Tegra30/124/210 + sor Display interfaces Tegra124/210 + ve2 Video Encode Engine 2 Tegra210 + venc Video Encode Engine All + vdec Video Decode Engine Tegra20/30/114/124 + vic Video Imaging Compositor Tegra124/210 + xusba USB Partition A Tegra114/124/210 + xusbb USB Partition B Tegra114/124/210 + xusbc USB Partition C Tegra114/124/210 + + patternProperties: + "^[a-z0-9]+$": + type: object + + patternProperties: + clocks: + minItems: 1 + maxItems: 8 + description: + Must contain an entry for each clock required by the PMC + for controlling a power-gate. + See ../clocks/clock-bindings.txt document for more details. + + resets: + minItems: 1 + maxItems: 8 + description: + Must contain an entry for each reset required by the PMC + for controlling a power-gate. + See ../reset/reset.txt for more details. + + '#power-domain-cells': + const: 0 + description: Must be 0. + + required: + - clocks + - resets + - '#power-domain-cells' + + additionalProperties: false + +patternProperties: + "^[a-f0-9]+-[a-f0-9]+$": + type: object + description: + This is a Pad configuration node. On Tegra SOCs a pad is a set of + pins which are configured as a group. The pin grouping is a fixed + attribute of the hardware. The PMC can be used to set pad power state + and signaling voltage. A pad can be either in active or power down mode. + The support for power state and signaling voltage configuration varies + depending on the pad in question. 3.3V and 1.8V signaling voltages + are supported on pins where software controllable signaling voltage + switching is available. + + The pad configuration state nodes are placed under the pmc node and they + are referred to by the pinctrl client properties. For more information + see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. + The pad name should be used as the value of the pins property in pin + configuration nodes. + + The following pads are present on Tegra124 and Tegra132 + audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic, + hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl, + sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias. + + The following pads are present on Tegra210 + audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg, + debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi, + hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1, + sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias. + + properties: + pins: + $ref: /schemas/types.yaml#/definitions/string + description: Must contain name of the pad(s) to be configured. + + low-power-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into power down mode. + + low-power-disable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into active mode. + + power-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or + TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. + The values are defined in + include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. + Power state can be configured on all Tegra124 and Tegra132 + pads. None of the Tegra124 or Tegra132 pads support signaling + voltage switching. + All of the listed Tegra210 pads except pex-cntrl support power + state configuration. Signaling voltage switching is supported + on below Tegra210 pads. + audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1, + sdmmc3, spi, spi-hv, and uart. + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + - clock-names + - clocks + - '#clock-cells' + +dependencies: + "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] + "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] + "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"] + +examples: + - | + + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> + #include <dt-bindings/soc/tegra-pmc.h> + + tegra_pmc: pmc@7000e400 { + compatible = "nvidia,tegra210-pmc"; + reg = <0x0 0x7000e400 0x0 0x400>; + clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; + + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + powergates { + pd_audio: aud { + clocks = <&tegra_car TEGRA210_CLK_APE>, + <&tegra_car TEGRA210_CLK_APB2APE>; + resets = <&tegra_car 198>; + #power-domain-cells = <0>; + }; + + pd_xusbss: xusba { + clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>; + resets = <&tegra_car TEGRA210_CLK_XUSB_SS>; + #power-domain-cells = <0>; + }; + }; + }; |