1 files changed, 0 insertions, 50 deletions
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
deleted file mode 100644
index 9cf3f25544c7..000000000000
--- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-ARM Versatile Express system registers
---------------------------------------
-
-This is a system control registers block, providing multiple low level
-platform functions like board detection and identification, software
-interrupt generation, MMC and NOR Flash control etc.
-
-Required node properties:
-- compatible value : = "arm,vexpress,sysreg";
-- reg : physical base address and the size of the registers window
-- gpio-controller : specifies that the node is a GPIO controller
-- #gpio-cells : size of the GPIO specifier, should be 2:
-  - first cell is the pseudo-GPIO line number:
-    0 - MMC CARDIN
-    1 - MMC WPROT
-    2 - NOR FLASH WPn
-  - second cell can take standard GPIO flags (currently ignored).
-
-Example:
-	v2m_sysreg: sysreg@10000000 {
- 		compatible = "arm,vexpress-sysreg";
- 		reg = <0x10000000 0x1000>;
-		gpio-controller;
-		#gpio-cells = <2>;
- 	};
-
-This block also can also act a bridge to the platform's configuration
-bus via "system control" interface, addressing devices with site number,
-position in the board stack, config controller, function and device
-numbers - see motherboard's TRM for more details.
-
-The node describing a config device must refer to the sysreg node via
-"arm,vexpress,config-bridge" phandle (can be also defined in the node's
-parent) and relies on the board topology properties - see main vexpress
-node documentation for more details. It must must also define the
-following property:
-- arm,vexpress-sysreg,func : must contain two cells:
-  - first cell defines function number (eg. 1 for clock generator,
-    2 for voltage regulators etc.)
-  - device number (eg. osc 0, osc 1 etc.)
-
-Example:
-	mcc {
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-		};
-	};