summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/bus/ti-sysc.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/bus/ti-sysc.txt')
-rw-r--r--Documentation/devicetree/bindings/bus/ti-sysc.txt36
1 files changed, 36 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt
index fb1790e39398..48bbb0c96835 100644
--- a/Documentation/devicetree/bindings/bus/ti-sysc.txt
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt
@@ -26,6 +26,8 @@ Required standard properties:
or one of the following derivative types for hardware
needing special workarounds:
+ "ti,sysc-omap2-timer"
+ "ti,sysc-omap4-timer"
"ti,sysc-omap3430-sr"
"ti,sysc-omap3630-sr"
"ti,sysc-omap4-sr"
@@ -49,6 +51,26 @@ Required standard properties:
Optional properties:
+- ti,sysc-mask shall contain mask of supported register bits for the
+ SYSCONFIG register as documented in the Technical Reference
+ Manual (TRM) for the interconnect target module
+
+- ti,sysc-midle list of master idle modes supported by the interconnect
+ target module as documented in the TRM for SYSCONFIG
+ register MIDLEMODE bits
+
+- ti,sysc-sidle list of slave idle modes supported by the interconnect
+ target module as documented in the TRM for SYSCONFIG
+ register SIDLEMODE bits
+
+- ti,sysc-delay-us delay needed after OCP softreset before accssing
+ SYSCONFIG register again
+
+- ti,syss-mask optional mask of reset done status bits as described in the
+ TRM for SYSSTATUS registers, typically 1 with some devices
+ having separate reset done bits for children like OHCI and
+ EHCI
+
- clocks clock specifier for each name in the clock-names as
specified in the binding documentation for ti-clkctrl,
typically available for all interconnect targets on TI SoCs
@@ -61,6 +83,9 @@ Optional properties:
- ti,hwmods optional TI interconnect module name to use legacy
hwmod platform data
+- ti,no-reset-on-init interconnect target module should not be reset at init
+
+- ti,no-idle-on-init interconnect target module should not be idled at init
Example: Single instance of MUSB controller on omap4 using interconnect ranges
using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
@@ -74,6 +99,17 @@ using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
reg-names = "rev", "sysc", "syss";
clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
clock-names = "fck";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x2b000 0x1000>;