1 files changed, 0 insertions, 131 deletions
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt b/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt
deleted file mode 100644
index 2cc32a9a945a..000000000000
--- a/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-* NXP LPC1850 Clock Generation Unit (CGU)
-
-The CGU generates multiple independent clocks for the core and the
-peripheral blocks of the LPC18xx. Each independent clock is called
-a base clock and itself is one of the inputs to the two Clock
-Control Units (CCUs) which control the branch clocks to the
-individual peripherals.
-
-The CGU selects the inputs to the clock generators from multiple
-clock sources, controls the clock generation, and routes the outputs
-of the clock generators through the clock source bus to the output
-stages. Each output stage provides an independent clock source and
-corresponds to one of the base clocks for the LPC18xx.
-
- - Above text taken from NXP LPC1850 User Manual.
-
-
-This binding uses the common clock binding:
-    Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible:
-	Should be "nxp,lpc1850-cgu"
-- reg:
-	Shall define the base and range of the address space
-	containing clock control registers
-- #clock-cells:
-	Shall have value <1>.  The permitted clock-specifier values
-	are the base clock numbers defined below.
-- clocks:
-	Shall contain a list of phandles for the external input
-	sources to the CGU. The list shall be in the following
-	order: xtal, 32khz, enet_rx_clk, enet_tx_clk, gp_clkin.
-- clock-indices:
-	Shall be an ordered list of numbers defining the base clock
-	number provided by the CGU.
-- clock-output-names:
-	Shall be an ordered list of strings defining the names of
-	the clocks provided by the CGU.
-
-Which base clocks that are available on the CGU depends on the
-specific LPC part. Base clocks are numbered from 0 to 27.
-
-Number:		Name:			Description:
- 0		BASE_SAFE_CLK		Base safe clock (always on) for WWDT
- 1		BASE_USB0_CLK		Base clock for USB0
- 2		BASE_PERIPH_CLK		Base clock for Cortex-M0SUB subsystem,
-					SPI, and SGPIO
- 3		BASE_USB1_CLK		Base clock for USB1
- 4		BASE_CPU_CLK		System base clock for ARM Cortex-M core
-					and APB peripheral blocks #0 and #2
- 5		BASE_SPIFI_CLK		Base clock for SPIFI
- 6		BASE_SPI_CLK		Base clock for SPI
- 7		BASE_PHY_RX_CLK		Base clock for Ethernet PHY Receive clock
- 8		BASE_PHY_TX_CLK		Base clock for Ethernet PHY Transmit clock
- 9		BASE_APB1_CLK		Base clock for APB peripheral block # 1
-10		BASE_APB3_CLK		Base clock for APB peripheral block # 3
-11		BASE_LCD_CLK		Base clock for LCD
-12		BASE_ADCHS_CLK		Base clock for ADCHS
-13		BASE_SDIO_CLK		Base clock for SD/MMC
-14		BASE_SSP0_CLK		Base clock for SSP0
-15		BASE_SSP1_CLK		Base clock for SSP1
-16		BASE_UART0_CLK		Base clock for UART0
-17		BASE_UART1_CLK		Base clock for UART1
-18		BASE_UART2_CLK		Base clock for UART2
-19		BASE_UART3_CLK		Base clock for UART3
-20		BASE_OUT_CLK		Base clock for CLKOUT pin
-24-21		-			Reserved
-25		BASE_AUDIO_CLK		Base clock for audio system (I2S)
-26 		BASE_CGU_OUT0_CLK	Base clock for CGU_OUT0 clock output
-27 		BASE_CGU_OUT1_CLK	Base clock for CGU_OUT1 clock output
-
-BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx.
-BASE_ADCHS_CLK is only available on LPC4370.
-
-
-Example board file:
-
-/ {
-	clocks {
-		xtal: xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-
-		xtal32: xtal32 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-
-		enet_rx_clk: enet_rx_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "enet_rx_clk";
-		};
-
-		enet_tx_clk: enet_tx_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "enet_tx_clk";
-		};
-
-		gp_clkin: gp_clkin {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "gp_clkin";
-		};
-	};
-
-	soc {
-		cgu: clock-controller@40050000 {
-			compatible = "nxp,lpc1850-cgu";
-			reg = <0x40050000 0x1000>;
-			#clock-cells = <1>;
-			clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
-		};
-
-		/* A CGU and CCU clock consumer */
-		lcdc: lcdc@40008000 {
-			...
-			clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
-			clock-names = "clcdclk", "apb_pclk";
-			...
-		};
-	};
-};