1 files changed, 0 insertions, 52 deletions
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt
deleted file mode 100644
index 6f1c7b4e4d2c..000000000000
--- a/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* NXP LPC1850 CREG clocks
-
-The NXP LPC18xx/43xx CREG (Configuration Registers) block contains
-control registers for two low speed clocks. One of the clocks is a
-32 kHz oscillator driver with power up/down and clock gating. Next
-is a fixed divider that creates a 1 kHz clock from the 32 kHz osc.
-
-These clocks are used by the RTC and the Event Router peripherials.
-The 32 kHz can also be routed to other peripherials to enable low
-power modes.
-
-This binding uses the common clock binding:
-    Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible:
-	Should be "nxp,lpc1850-creg-clk"
-- #clock-cells:
-	Shall have value <1>.
-- clocks:
-	Shall contain a phandle to the fixed 32 kHz crystal.
-
-The creg-clk node must be a child of the creg syscon node.
-
-The following clocks are available from the clock node.
-
-Clock ID	Name
-   0		 1 kHz clock
-   1		32 kHz Oscillator
-
-Example:
-soc {
-	creg: syscon@40043000 {
-		compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
-		reg = <0x40043000 0x1000>;
-
-		creg_clk: clock-controller {
-			compatible = "nxp,lpc1850-creg-clk";
-			clocks = <&xtal32>;
-			#clock-cells = <1>;
-		};
-
-		...
-	};
-
-	rtc: rtc@40046000 {
-		...
-		clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
-		clock-names = "rtc", "reg";
-		...
-	};
-};