1 files changed, 0 insertions, 54 deletions
diff --git a/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt b/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt
deleted file mode 100644
index 87740adb2995..000000000000
--- a/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-NXP LPC18xx/43xx DMA MUX (DMA request router)
-
-Required properties:
-- compatible:	"nxp,lpc1850-dmamux"
-- reg:		Memory map for accessing module
-- #dma-cells:	Should be set to <3>.
-		* 1st cell contain the master dma request signal
-		* 2nd cell contain the mux value (0-3) for the peripheral
-		* 3rd cell contain either 1 or 2 depending on the AHB
-		  master used.
-- dma-requests:	Number of DMA requests for the mux
-- dma-masters:	phandle pointing to the DMA controller
-
-The DMA controller node need to have the following poroperties:
-- dma-requests:	Number of DMA requests the controller can handle
-
-Example:
-
-dmac: dma@40002000 {
-	compatible = "nxp,lpc1850-gpdma", "arm,pl080", "arm,primecell";
-	arm,primecell-periphid = <0x00041080>;
-	reg = <0x40002000 0x1000>;
-	interrupts = <2>;
-	clocks = <&ccu1 CLK_CPU_DMA>;
-	clock-names = "apb_pclk";
-	#dma-cells = <2>;
-	dma-channels = <8>;
-	dma-requests = <16>;
-	lli-bus-interface-ahb1;
-	lli-bus-interface-ahb2;
-	mem-bus-interface-ahb1;
-	mem-bus-interface-ahb2;
-	memcpy-burst-size = <256>;
-	memcpy-bus-width = <32>;
-};
-
-dmamux: dma-mux {
-	compatible = "nxp,lpc1850-dmamux";
-	#dma-cells = <3>;
-	dma-requests = <64>;
-	dma-masters = <&dmac>;
-};
-
-uart0: serial@40081000 {
-	compatible = "nxp,lpc1850-uart", "ns16550a";
-	reg = <0x40081000 0x1000>;
-	reg-shift = <2>;
-	interrupts = <24>;
-	clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
-	clock-names = "uartclk", "reg";
-	dmas = <&dmamux 1 1 2
-		&dmamux 2 1 2>;
-	dma-names = "tx", "rx";
-};