1 files changed, 0 insertions, 44 deletions
diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt
deleted file mode 100644
index c7e9b5fd50e7..000000000000
--- a/Documentation/devicetree/bindings/dma/sprd-dma.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* Spreadtrum DMA controller
-
-This binding follows the generic DMA bindings defined in dma.txt.
-
-Required properties:
-- compatible: Should be "sprd,sc9860-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain one interrupt shared by all channel.
-- #dma-cells: must be <1>. Used to represent the number of integer
-	cells in the dmas property of client device.
-- dma-channels : Number of DMA channels supported. Should be 32.
-- clock-names: Should contain the clock of the DMA controller.
-- clocks: Should contain a clock specifier for each entry in clock-names.
-
-Deprecated properties:
-- #dma-channels : Number of DMA channels supported. Should be 32.
-
-Example:
-
-Controller:
-apdma: dma-controller@20100000 {
-	compatible = "sprd,sc9860-dma";
-	reg = <0x20100000 0x4000>;
-	interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-	#dma-cells = <1>;
-	dma-channels = <32>;
-	clock-names = "enable";
-	clocks = <&clk_ap_ahb_gates 5>;
-};
-
-
-Client:
-DMA clients connected to the Spreadtrum DMA controller must use the format
-described in the dma.txt file, using a two-cell specifier for each channel.
-The two cells in order are:
-1. A phandle pointing to the DMA controller.
-2. The slave id.
-
-spi0: spi@70a00000{
-	...
-	dma-names = "rx_chn", "tx_chn";
-	dmas = <&apdma 11>, <&apdma 12>;
-	...
-};