diff options
Diffstat (limited to 'Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 25 |
1 files changed, 6 insertions, 19 deletions
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt index 325aca52cd43..b567107270cb 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt @@ -49,6 +49,12 @@ Optional properties for AXI DMA and MCDMA: register as configured in h/w. Takes values {8...26}. If the property is missing or invalid then the default value 23 is used. This is the maximum value that is supported by all IP versions. + +Optional properties for AXI DMA: +- xlnx,axistream-connected: Tells whether DMA is connected to AXI stream IP. +- xlnx,irq-delay: Tells the interrupt delay timeout value. Valid range is from + 0-255. Setting this value to zero disables the delay timer interrupt. + 1 timeout interval = 125 * clock period of SG clock. Optional properties for VDMA: - xlnx,flush-fsync: Tells which channel to Flush on Frame sync. It takes following values: @@ -103,22 +109,3 @@ axi_vdma_0: axivdma@40030000 { xlnx,datawidth = <0x40>; } ; } ; - - -* DMA client - -Required properties: -- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs, - where Channel ID is '0' for write/tx and '1' for read/rx - channel. -- dma-names: a list of DMA channel names, one per "dmas" entry - -Example: -++++++++ - -vdmatest_0: vdmatest@0 { - compatible ="xlnx,axi-vdma-test-1.00.a"; - dmas = <&axi_vdma_0 0 - &axi_vdma_0 1>; - dma-names = "vdma0", "vdma1"; -} ; |