diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/gpio-mxs.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/gpio-mxs.yaml | 206 |
1 files changed, 206 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml new file mode 100644 index 000000000000..fed1b06495ad --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS GPIO controller + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + +description: | + The Freescale MXS GPIO controller is part of MXS PIN controller. + The GPIOs are organized in port/bank, each port consists of 32 GPIOs. + As the GPIO controller is embedded in the PIN controller and all the + GPIO ports share the same IO space with PIN controller, the GPIO node + will be represented as sub-nodes of MXS pinctrl node. + +properties: + compatible: + items: + - enum: + - fsl,imx23-pinctrl + - fsl,imx28-pinctrl + # Over 10 years old devices, driver use simple-bus to probe child gpio + # Devices. Keep it as it to be compatible existed dts files. + - const: simple-bus + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + maxItems: 1 + +patternProperties: + '^(?!gpio@)[^@]+@[0-9]+$': + type: object + properties: + fsl,pinmux-ids: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + An integer array. Each integer in the array specify a pin + with given mux function, with bank, pin and mux packed as below. + + [15..12] : bank number + [11..4] : pin number + [3..0] : mux selection + + This integer with mux selection packed is used as an entity by both group + and config nodes to identify a pin. The mux selection in the integer takes + effects only on group node, and will get ignored by driver with config node, + since config node is only meant to set up pin configurations. + + Valid values for these integers are listed below. + + reg: + items: + - description: | + pin group index. NOTE: it is supposed wrong use reg property + here. But it is over 10 years devices. Just keep it as it. + + fsl,drive-strength: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + 0: MXS_DRIVE_4mA + 1: MXS_DRIVE_8mA + 2: MXS_DRIVE_12mA + 3: MXS_DRIVE_16mA + + fsl,voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + 0: MXS_VOLTAGE_LOW - 1.8 V + 1: MXS_VOLTAGE_HIGH - 3.3 V + + fsl,pull-up: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + 0: MXS_PULL_DISABLE - Disable the internal pull-up + 1: MXS_PULL_ENABLE - Enable the internal pull-up + + Note that when enabling the pull-up, the internal pad keeper gets disabled. + Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up + will only disable the internal pad keeper. + + required: + - fsl,pinmux-ids + + additionalProperties: false + + '^gpio@[0-9]+$': + type: object + properties: + compatible: + enum: + - fsl,imx23-gpio + - fsl,imx28-gpio + + reg: + maxItems: 1 + + interrupts: + description: Should be the port interrupt shared by all 32 pins. + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + '#gpio-cells': + const: 2 + + gpio-controller: true + + required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - '#gpio-cells' + - gpio-controller + + additionalProperties: false + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + pinctrl@80018000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-pinctrl", "simple-bus"; + reg = <0x80018000 0x2000>; + + gpio@0 { + compatible = "fsl,imx28-gpio"; + reg = <0>; + interrupts = <127>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@1 { + compatible = "fsl,imx28-gpio"; + reg = <1>; + interrupts = <126>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@2 { + compatible = "fsl,imx28-gpio"; + reg = <2>; + interrupts = <125>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@3 { + compatible = "fsl,imx28-gpio"; + reg = <3>; + interrupts = <124>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@4 { + compatible = "fsl,imx28-gpio"; + reg = <4>; + interrupts = <123>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + lcdif-apx4@5 { + reg = <5>; + fsl,pinmux-ids = <0x1181 0x1191>; + fsl,drive-strength = <0>; + fsl,voltage = <0>; + fsl,pull-up = <0>; + }; + }; |