1 files changed, 147 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml
new file mode 100644
index 000000000000..a5b4e0021758
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-valhall-csf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Valhall GPU
+
+maintainers:
+  - Liviu Dudau <liviu.dudau@arm.com>
+  - Boris Brezillon <boris.brezillon@collabora.com>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - rockchip,rk3588-mali
+          - const: arm,mali-valhall-csf   # Mali Valhall GPU model/revision is fully discoverable
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Job interrupt
+      - description: MMU interrupt
+      - description: GPU interrupt
+
+  interrupt-names:
+    items:
+      - const: job
+      - const: mmu
+      - const: gpu
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: coregroup
+      - const: stacks
+
+  mali-supply: true
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  power-domains:
+    minItems: 1
+    maxItems: 5
+
+  power-domain-names:
+    minItems: 1
+    maxItems: 5
+
+  sram-supply: true
+
+  "#cooling-cells":
+    const: 2
+
+  dynamic-power-coefficient:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      A u32 value that represents the running time dynamic
+      power coefficient in units of uW/MHz/V^2. The
+      coefficient can either be calculated from power
+      measurements or derived by analysis.
+
+      The dynamic power consumption of the GPU is
+      proportional to the square of the Voltage (V) and
+      the clock frequency (f). The coefficient is used to
+      calculate the dynamic power as below -
+
+      Pdyn = dynamic-power-coefficient * V^2 * f
+
+      where voltage is in V, frequency is in MHz.
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - mali-supply
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-mali
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3588-power.h>
+
+    gpu: gpu@fb000000 {
+        compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf";
+        reg = <0xfb000000 0x200000>;
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "job", "mmu", "gpu";
+        clock-names = "core", "coregroup", "stacks";
+        clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>,
+                 <&cru CLK_GPU_STACKS>;
+        power-domains = <&power RK3588_PD_GPU>;
+        operating-points-v2 = <&gpu_opp_table>;
+        mali-supply = <&vdd_gpu_s0>;
+        sram-supply = <&vdd_gpu_mem_s0>;
+
+        gpu_opp_table: opp-table {
+            compatible = "operating-points-v2";
+            opp-300000000 {
+                opp-hz = /bits/ 64 <300000000>;
+                opp-microvolt = <675000 675000 850000>;
+            };
+            opp-400000000 {
+                opp-hz = /bits/ 64 <400000000>;
+                opp-microvolt = <675000 675000 850000>;
+            };
+        };
+    };
+
+...