diff options
Diffstat (limited to 'Documentation/devicetree/bindings/hwmon/adt7475.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/hwmon/adt7475.yaml | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml new file mode 100644 index 000000000000..43e9fe225870 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adt7475.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADT7475 hwmon sensor + +maintainers: + - Jean Delvare <jdelvare@suse.com> + +description: | + The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple + PWN fan controllers. + + They support monitoring and controlling up to four fans (the ADT7490 can only + control up to three). They support reading a single on chip temperature + sensor and two off chip temperature sensors (the ADT7490 additionally + supports measuring up to three current external temperature sensors with + series resistance cancellation (SRC)). + + Datasheets: + https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF + + Description taken from onsemiconductors specification sheets, with minor + rephrasing. + +properties: + compatible: + enum: + - adi,adt7473 + - adi,adt7475 + - adi,adt7476 + - adi,adt7490 + + reg: + maxItems: 1 + + adi,pwm-active-state: + description: | + Integer array, represents the active state of the pwm outputs If set to 0 + the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm + uses a logic high output for 100% duty cycle. + $ref: /schemas/types.yaml#/definitions/uint32-array + deprecated: true + minItems: 3 + maxItems: 3 + items: + enum: [0, 1] + default: 1 + + "#pwm-cells": + oneOf: + - const: 3 + - const: 4 + deprecated: true + description: | + Number of cells in a PWM specifier. + - 0: The PWM channel + - 1: The PWM period in nanoseconds + - 90909091 (11 Hz) + - 71428571 (14 Hz) + - 45454545 (22 Hz) + - 34482759 (29 Hz) + - 28571429 (35 Hz) + - 22727273 (44 Hz) + - 17241379 (58 Hz) + - 11363636 (88 Hz) + - 44444 (22 kHz) + - 2: PWM flags 0 or PWM_POLARITY_INVERTED + - 3: The default PWM duty cycle in nanoseconds, defaults to period. + +patternProperties: + "^adi,bypass-attenuator-in[0-4]$": + description: | + Configures bypassing the individual voltage input attenuator. If + set to 1 the attenuator is bypassed if set to 0 the attenuator is + not bypassed. If the property is absent then the attenuator + retains its configuration from the bios/bootloader. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + "^adi,pin(5|10)-function$": + description: | + Configures the function for pin 5 on the adi,adt7473 and adi,adt7475. Or + pin 10 on the adi,adt7476 and adi,adt7490. + $ref: /schemas/types.yaml#/definitions/string + enum: + - pwm2 + - smbalert# + + "^adi,pin(9|14)-function$": + description: | + Configures the function for pin 9 on the adi,adt7473 and adi,adt7475. Or + pin 14 on the adi,adt7476 and adi,adt7490 + $ref: /schemas/types.yaml#/definitions/string + enum: + - tach4 + - therm# + - smbalert# + - gpio + + "^fan-[0-9]+$": + $ref: fan-common.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pwm/pwm.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pwm: hwmon@2e { + compatible = "adi,adt7476"; + reg = <0x2e>; + adi,bypass-attenuator-in0 = <1>; + adi,bypass-attenuator-in1 = <0>; + adi,pin10-function = "smbalert#"; + adi,pin14-function = "tach4"; + #pwm-cells = <3>; + + /* PWMs at 22.5 kHz frequency */ + fan-0 { + pwms = <&pwm 0 44444 0>; + }; + + fan-1 { + pwms = <&pwm 2 44444 0>; + }; + }; + }; |