1 files changed, 0 insertions, 39 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
deleted file mode 100644
index ed00f61b8c08..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-* Texas Instruments tsc2007 touchscreen controller
-
-Required properties:
-- compatible: must be "ti,tsc2007".
-- reg: I2C address of the chip.
-- ti,x-plate-ohms: X-plate resistance in ohms.
-
-Optional properties:
-- gpios: the interrupt gpio the chip is connected to (trough the penirq pin).
-  The penirq pin goes to low when the panel is touched.
-  (see GPIO binding[1] for more details).
-- interrupts: (gpio) interrupt to which the chip is connected
-  (see interrupt binding[0]).
-- ti,max-rt: maximum pressure.
-- ti,fuzzx: specifies the absolute input fuzz x value.
-  If set, it will permit noise in the data up to +- the value given to the fuzz
-  parameter, that is used to filter noise from the event stream.
-- ti,fuzzy: specifies the absolute input fuzz y value.
-- ti,fuzzz: specifies the absolute input fuzz z value.
-- ti,poll-period: how much time to wait (in milliseconds) before reading again the
-  values from the tsc2007.
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/gpio/gpio.txt
-
-Example:
-	&i2c1 {
-		/* ... */
-		tsc2007@49 {
-			compatible = "ti,tsc2007";
-			reg = <0x49>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <0x0 0x8>;
-			gpios = <&gpio4 0 0>;
-			ti,x-plate-ohms = <180>;
-		};
-
-		/* ... */
-	};