1 files changed, 0 insertions, 109 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
deleted file mode 100644
index 5fc96944b448..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml
+++ /dev/null
@@ -1,109 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/media/i2c/imx219.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
-
-maintainers:
-  - Dave Stevenson <dave.stevenson@raspberrypi.com>
-
-description: |-
-  The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
-  with an active array size of 3280H x 2464V. It is programmable through
-  I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
-  Image data is sent through MIPI CSI-2, which is configured as either 2 or
-  4 data lanes.
-
-properties:
-  compatible:
-    const: sony,imx219
-
-  reg:
-    description: I2C device address
-    maxItems: 1
-
-  clocks:
-    maxItems: 1
-
-  VDIG-supply:
-    description:
-      Digital I/O voltage supply, 1.8 volts
-
-  VANA-supply:
-    description:
-      Analog voltage supply, 2.8 volts
-
-  VDDL-supply:
-    description:
-      Digital core voltage supply, 1.2 volts
-
-  reset-gpios:
-    maxItems: 1
-    description: |-
-      Reference to the GPIO connected to the xclr pin, if any.
-      Must be released (set high) after all supplies are applied.
-
-  port:
-    $ref: /schemas/graph.yaml#/$defs/port-base
-    additionalProperties: false
-
-    properties:
-      endpoint:
-        $ref: /schemas/media/video-interfaces.yaml#
-        unevaluatedProperties: false
-
-        properties:
-          data-lanes:
-            description: |-
-              The sensor supports either two-lane, or four-lane operation.
-              If this property is omitted four-lane operation is assumed.
-              For two-lane operation the property must be set to <1 2>.
-            items:
-              - const: 1
-              - const: 2
-
-          clock-noncontinuous: true
-          link-frequencies: true
-
-        required:
-          - link-frequencies
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - VANA-supply
-  - VDIG-supply
-  - VDDL-supply
-  - port
-
-additionalProperties: false
-
-examples:
-  - |
-    i2c0 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        imx219: sensor@10 {
-            compatible = "sony,imx219";
-            reg = <0x10>;
-            clocks = <&imx219_clk>;
-            VANA-supply = <&imx219_vana>;   /* 2.8v */
-            VDIG-supply = <&imx219_vdig>;   /* 1.8v */
-            VDDL-supply = <&imx219_vddl>;   /* 1.2v */
-
-            port {
-                imx219_0: endpoint {
-                    remote-endpoint = <&csi1_ep>;
-                    data-lanes = <1 2>;
-                    clock-noncontinuous;
-                    link-frequencies = /bits/ 64 <456000000>;
-                };
-            };
-        };
-    };
-
-...