summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml')
-rw-r--r--Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml51
1 files changed, 41 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index 90315e217003..0c4213adbf6a 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -39,7 +39,7 @@ properties:
maxItems: 1
poc-supply:
- description: Regulator providing Power over Coax to the cameras
+ description: Regulator providing Power over Coax to all the ports
enable-gpios:
description: GPIO connected to the \#PWDN pin with inverted polarity
@@ -50,6 +50,21 @@ properties:
'#gpio-cells':
const: 2
+ maxim,bus-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 24, 27, 32 ]
+ description: |
+ The GMSL serial data bus width. This setting is normally controlled by
+ the BWS pin, but may be overridden with this property. The value must
+ match the configuration of the remote serializers.
+
+ maxim,i2c-remote-bus-hz:
+ enum: [ 8470, 28300, 84700, 105000, 173000, 339000, 533000, 837000 ]
+ default: 105000
+ description: |
+ The I2C clock frequency for the remote I2C buses. The value must match
+ the configuration of the remote serializers.
+
maxim,reverse-channel-microvolt:
minimum: 30000
maximum: 200000
@@ -182,21 +197,36 @@ properties:
additionalProperties: false
+patternProperties:
+ "^port[0-3]-poc-supply$":
+ description: Regulator providing Power over Coax for a particular port
+
required:
- compatible
- reg
- ports
- i2c-mux
-# If 'maxim,gpio-poc' is present, then 'poc-supply' and 'gpio-controller'
-# are not allowed.
-if:
- required:
- - maxim,gpio-poc
-then:
- properties:
- poc-supply: false
- gpio-controller: false
+allOf:
+ # Only one way of specifying power supplies is allowed: 'maxim,gpio-poc',
+ # 'poc-supply' or per-port poc-supply. Additionally, if 'maxim,gpio-poc' is
+ # present, then 'gpio-controller' isn't allowed.
+ - if:
+ required:
+ - maxim,gpio-poc
+ then:
+ properties:
+ poc-supply: false
+ gpio-controller: false
+ patternProperties:
+ "^port[0-3]-poc-supply$": false
+
+ - if:
+ required:
+ - poc-supply
+ then:
+ patternProperties:
+ "^port[0-3]-poc-supply$": false
additionalProperties: false
@@ -219,6 +249,7 @@ examples:
gpio-controller;
#gpio-cells = <2>;
+ maxim,i2c-remote-bus-hz = <339000>;
maxim,reverse-channel-microvolt = <170000>;
ports {