summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/mfd/atmel-usart.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mfd/atmel-usart.txt')
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-usart.txt98
1 files changed, 0 insertions, 98 deletions
diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
deleted file mode 100644
index a09133066aff..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
-
-Required properties for USART:
-- compatible: Should be one of the following:
- - "atmel,at91rm9200-usart"
- - "atmel,at91sam9260-usart"
- - "microchip,sam9x60-usart"
- - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
- - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"
- - "microchip,sam9x60-dbgu", "microchip,sam9x60-usart"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt
-- clock-names: tuple listing input clock names.
- Required elements: "usart"
-- clocks: phandles to input clocks.
-
-Required properties for USART in SPI mode:
-- #size-cells : Must be <0>
-- #address-cells : Must be <1>
-- cs-gpios: chipselects (internal cs not supported)
-- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h)
-
-Optional properties in serial and SPI mode:
-- dma bindings for dma transfer:
- - dmas: DMA specifier, consisting of a phandle to DMA controller node,
- memory peripheral interface and USART DMA channel ID, FIFO configuration.
- The order of DMA channels is fixed. The first DMA channel must be TX
- associated channel and the second one must be RX associated channel.
- Refer to dma.txt and atmel-dma.txt for details.
- - dma-names: "tx" for TX channel.
- "rx" for RX channel.
- The order of dma-names is also fixed. The first name must be "tx"
- and the second one must be "rx" as in the examples below.
-
-Optional properties in serial mode:
-- atmel,use-dma-rx: use of PDC or DMA for receiving data
-- atmel,use-dma-tx: use of PDC or DMA for transmitting data
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
- It will use specified PIO instead of the peripheral function pin for the USART feature.
- If unsure, don't specify this property.
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
- capable USARTs.
-- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
-
-<chip> compatible description:
-- at91rm9200: legacy USART support
-- at91sam9260: generic USART implementation for SAM9 SoCs
-
-Example:
-- use PDC:
- usart0: serial@fff8c000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfff8c000 0x4000>;
- interrupts = <7>;
- clocks = <&usart0_clk>;
- clock-names = "usart";
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
- cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
- dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
- dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
- dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
- rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
- };
-
-- use DMA:
- usart0: serial@f001c000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xf001c000 0x100>;
- interrupts = <12 4 5>;
- clocks = <&usart0_clk>;
- clock-names = "usart";
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- dmas = <&dma0 2 0x3>,
- <&dma0 2 0x204>;
- dma-names = "tx", "rx";
- atmel,fifo-size = <32>;
- };
-
-- SPI mode:
- #include <dt-bindings/mfd/at91-usart.h>
-
- spi0: spi@f001c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart";
- atmel,usart-mode = <AT91_USART_MODE_SPI>;
- reg = <0xf001c000 0x100>;
- interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&usart0_clk>;
- clock-names = "usart";
- dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
- <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
- dma-names = "tx", "rx";
- cs-gpios = <&pioB 3 0>;
- };