summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
-rw-r--r--Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml2
-rw-r--r--Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml4
-rw-r--r--Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml16
-rw-r--r--Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml2
4 files changed, 12 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
index 750996d9a175..5dfe77aca167 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
@@ -27,7 +27,7 @@ description:
as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
management and bus snoop configuration.
- * A set of SuperIO[3] scratch registers enableing implementation of e.g. custom
+ * A set of SuperIO[3] scratch registers enabling implementation of e.g. custom
hardware management protocols for handover between the host and baseboard
management controller.
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
index 10f207a38178..b7b323b1a4f2 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
@@ -34,7 +34,7 @@ properties:
BD9576 and BD9573 VOUT1 regulator enable state can be individually
controlled by a GPIO. This is dictated by state of vout1-en pin during
the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1
- enable sate is controlled via this pin. Set this property if vout1-en
+ enable state is controlled via this pin. Set this property if vout1-en
is wired to be down at PMIC start-up.
type: boolean
@@ -61,7 +61,7 @@ properties:
rohm,hw-timeout-ms:
maxItems: 2
description:
- Watchog timeout in milliseconds. If single value is given it is
+ Watchdog timeout in milliseconds. If single value is given it is
the maximum timeout. Eg. if pinging watchdog is not done within this time
limit the watchdog will be triggered. If two values are given watchdog
is configured in "window mode". Then first value is limit for short-ping
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
index 6c8d42f27fe8..94f9767a927d 100644
--- a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
+++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
@@ -313,7 +313,7 @@ properties:
- const: audioclk
stericsson,earpeice-cmv:
- description: Earpeice voltage
+ description: Earpiece voltage
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 950, 1100, 1270, 1580 ]
@@ -337,39 +337,39 @@ properties:
with power.
ab8500_ldo_aux1:
- description: The voltage for the auxilary LDO regulator 1
+ description: The voltage for the auxiliary LDO regulator 1
type: object
$ref: ../regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_aux2:
- description: The voltage for the auxilary LDO regulator 2
+ description: The voltage for the auxiliary LDO regulator 2
type: object
$ref: ../regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_aux3:
- description: The voltage for the auxilary LDO regulator 3
+ description: The voltage for the auxiliary LDO regulator 3
type: object
$ref: ../regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_aux4:
- description: The voltage for the auxilary LDO regulator 4
+ description: The voltage for the auxiliary LDO regulator 4
only present on AB8505
type: object
$ref: ../regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_aux5:
- description: The voltage for the auxilary LDO regulator 5
+ description: The voltage for the auxiliary LDO regulator 5
only present on AB8505
type: object
$ref: ../regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_aux6:
- description: The voltage for the auxilary LDO regulator 6
+ description: The voltage for the auxiliary LDO regulator 6
only present on AB8505
type: object
$ref: ../regulator/regulator.yaml#
@@ -378,7 +378,7 @@ properties:
# There is never any AUX7 regulator which is confusing
ab8500_ldo_aux8:
- description: The voltage for the auxilary LDO regulator 8
+ description: The voltage for the auxiliary LDO regulator 8
only present on AB8505
type: object
$ref: ../regulator/regulator.yaml#
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
index 1d4d88f7e82d..a66d58b4d1f2 100644
--- a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
+++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
@@ -107,7 +107,7 @@ properties:
$ref: ../regulator/regulator.yaml#
db8500_vrf1:
- description: RF transciever voltage regulator.
+ description: RF transceiver voltage regulator.
type: object
$ref: ../regulator/regulator.yaml#