1 files changed, 0 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
deleted file mode 100644
index d2eada5044b2..000000000000
--- a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Cadence NAND controller
-
-Required properties:
-  - compatible : "cdns,hp-nfc"
-  - reg : Contains two entries, each of which is a tuple consisting of a
-	  physical address and length. The first entry is the address and
-	  length of the controller register set. The second entry is the
-	  address and length of the Slave DMA data port.
-  - reg-names: should contain "reg" and "sdma"
-  - #address-cells: should be 1. The cell encodes the chip select connection.
-  - #size-cells : should be 0.
-  - interrupts : The interrupt number.
-  - clocks: phandle of the controller core clock (nf_clk).
-
-Optional properties:
-  - dmas: shall reference DMA channel associated to the NAND controller
-  - cdns,board-delay-ps : Estimated Board delay. The value includes the total
-    round trip delay for the signals and is used for deciding on values
-    associated with data read capture. The example formula for SDR mode is
-    the following:
-    board delay = RE#PAD delay + PCB trace to device + PCB trace from device
-    + DQ PAD delay
-
-Child nodes represent the available NAND chips.
-
-Required properties of NAND chips:
-  - reg: shall contain the native Chip Select ids from 0 to max supported by
-    the cadence nand flash controller
-
-See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on
-generic bindings.
-
-Example:
-
-nand_controller: nand-controller@60000000 {
-	  compatible = "cdns,hp-nfc";
-	  #address-cells = <1>;
-	  #size-cells = <0>;
-	  reg = <0x60000000 0x10000>, <0x80000000 0x10000>;
-	  reg-names = "reg", "sdma";
-	  clocks = <&nf_clk>;
-	  cdns,board-delay-ps = <4830>;
-	  interrupts = <2 0>;
-	  nand@0 {
-	      reg = <0>;
-	      label = "nand-1";
-	  };
-	  nand@1 {
-	      reg = <1>;
-	      label = "nand-2";
-	  };
-
-};