summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/mtd/denali-nand.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/denali-nand.txt')
-rw-r--r--Documentation/devicetree/bindings/mtd/denali-nand.txt61
1 files changed, 0 insertions, 61 deletions
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
deleted file mode 100644
index 98916a84bbf6..000000000000
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Denali NAND controller
-
-Required properties:
- - compatible : should be one of the following:
- "altr,socfpga-denali-nand" - for Altera SOCFPGA
- "socionext,uniphier-denali-nand-v5a" - for Socionext UniPhier (v5a)
- "socionext,uniphier-denali-nand-v5b" - for Socionext UniPhier (v5b)
- - reg : should contain registers location and length for data and reg.
- - reg-names: Should contain the reg names "nand_data" and "denali_reg"
- - #address-cells: should be 1. The cell encodes the chip select connection.
- - #size-cells : should be 0.
- - interrupts : The interrupt number.
- - clocks: should contain phandle of the controller core clock, the bus
- interface clock, and the ECC circuit clock.
- - clock-names: should contain "nand", "nand_x", "ecc"
-
-Optional properties:
- - resets: may contain phandles to the controller core reset, the register
- reset
- - reset-names: may contain "nand", "reg"
-
-Sub-nodes:
- Sub-nodes represent available NAND chips.
-
- Required properties:
- - reg: should contain the bank ID of the controller to which each chip
- select is connected.
-
- Optional properties:
- - nand-ecc-step-size: see nand-controller.yaml for details.
- If present, the value must be
- 512 for "altr,socfpga-denali-nand"
- 1024 for "socionext,uniphier-denali-nand-v5a"
- 1024 for "socionext,uniphier-denali-nand-v5b"
- - nand-ecc-strength: see nand-controller.yaml for details. Valid values are:
- 8, 15 for "altr,socfpga-denali-nand"
- 8, 16, 24 for "socionext,uniphier-denali-nand-v5a"
- 8, 16 for "socionext,uniphier-denali-nand-v5b"
- - nand-ecc-maximize: see nand-controller.yaml for details
-
-The chip nodes may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Examples:
-
-nand: nand@ff900000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "altr,socfpga-denali-nand";
- reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
- reg-names = "nand_data", "denali_reg";
- clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
- clock-names = "nand", "nand_x", "ecc";
- resets = <&nand_rst>, <&nand_reg_rst>;
- reset-names = "nand", "reg";
- interrupts = <0 144 4>;
-
- nand@0 {
- reg = <0>;
- }
-};