1 files changed, 0 insertions, 38 deletions
diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt
deleted file mode 100644
index bcbc3f009158..000000000000
--- a/Documentation/devicetree/bindings/net/arc_emac.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Synopsys ARC EMAC 10/100 Ethernet driver (EMAC)
-
-Required properties:
-- compatible: Should be "snps,arc-emac"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the EMAC interrupts
-- clock-frequency: CPU frequency. It is needed to calculate and set polling
-period of EMAC.
-- max-speed: Maximum supported data-rate in Mbit/s. In some HW configurations
-bandwidth of external memory controller might be a limiting factor. That's why
-it's required to specify which data-rate is supported on current SoC or FPGA.
-For example if only 10 Mbit/s is supported (10BASE-T) set "10". If 100 Mbit/s is
-supported (100BASE-TX) set "100".
-- phy: PHY device attached to the EMAC via MDIO bus
-
-Child nodes of the driver are the individual PHY devices connected to the
-MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
-
-Optional properties:
-- mac-address: 6 bytes, mac address
-
-Examples:
-
-	ethernet@c0fc2000 {
-		compatible = "snps,arc-emac";
-		reg = <0xc0fc2000 0x3c>;
-		interrupts = <6>;
-		mac-address = [ 00 11 22 33 44 55 ];
-		clock-frequency = <80000000>;
-		max-speed = <100>;
-		phy = <&phy0>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-		phy0: ethernet-phy@0 {
-			reg = <1>;
-		};
-	};