diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 53 |
1 files changed, 44 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml index e532c6b795f4..815a90808901 100644 --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml @@ -22,16 +22,16 @@ description: | The MT7988 SoC comes with a built-in switch similar to MT7531 as well as four Gigabit Ethernet PHYs. The switch registers are directly mapped into the SoC's - memory map rather than using MDIO. The switch got an internally connected 10G + memory map rather than using MDIO. The switch has an internally connected 10G CPU port and 4 user ports connected to the built-in Gigabit Ethernet PHYs. - MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs + The MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has 10/100 PHYs and the switch registers are directly mapped into SoC's memory map rather than using MDIO. The DSA driver currently doesn't support MT7620 variants. There is only the standalone version of MT7531. - Port 5 on MT7530 has got various ways of configuration: + Port 5 on MT7530 supports various configurations: - Port 5 can be used as a CPU port. @@ -60,7 +60,7 @@ description: | Check out example 6. - - Port 5 can be wired to an external phy. Port 5 becomes a DSA slave. + - Port 5 can be wired to an external phy. Port 5 becomes a DSA user port. For the multi-chip module MT7530, the external phy must be wired TX to TX to gmac1 of the SoC for this to work. Ubiquiti EdgeRouter X SFP is wired @@ -92,6 +92,14 @@ properties: Built-in switch of the MT7988 SoC const: mediatek,mt7988-switch + - description: + Built-in switch of the Airoha EN7581 SoC + const: airoha,en7581-switch + + - description: + Built-in switch of the Airoha AN7583 SoC + const: airoha,an7583-switch + reg: maxItems: 1 @@ -128,6 +136,16 @@ properties: See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for details for the regulator setup on these boards. + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + + properties: + mediatek,pio: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle pointing to the mediatek pinctrl node. + mediatek,mcm: type: boolean description: @@ -154,10 +172,12 @@ properties: patternProperties: "^(ethernet-)?ports$": type: object + additionalProperties: true patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-6]$": type: object + additionalProperties: true properties: reg: @@ -180,11 +200,23 @@ required: - reg $defs: + builtin-dsa-port: + patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-6]$": + if: + required: [ ethernet ] + then: + properties: + phy-mode: + const: internal + mt7530-dsa-port: patternProperties: "^(ethernet-)?ports$": patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-6]$": if: required: [ ethernet ] then: @@ -210,7 +242,7 @@ $defs: patternProperties: "^(ethernet-)?ports$": patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-6]$": if: required: [ ethernet ] then: @@ -282,9 +314,12 @@ allOf: - if: properties: compatible: - const: mediatek,mt7988-switch + enum: + - mediatek,mt7988-switch + - airoha,en7581-switch + - airoha,an7583-switch then: - $ref: "#/$defs/mt7530-dsa-port" + $ref: "#/$defs/builtin-dsa-port" properties: gpio-controller: false mediatek,mcm: false |