diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml | 112 |
1 files changed, 107 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index 03b5567be389..a8c8009414ae 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -10,20 +10,19 @@ maintainers: - Marek Vasut <marex@denx.de> - Woojung Huh <Woojung.Huh@microchip.com> -allOf: - - $ref: dsa.yaml#/$defs/ethernet-ports - - $ref: /schemas/spi/spi-peripheral-props.yaml# - properties: # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional # required and optional properties. compatible: enum: + - microchip,ksz8463 - microchip,ksz8765 - microchip,ksz8794 - microchip,ksz8795 - microchip,ksz8863 + - microchip,ksz8864 # 4-port version of KSZ8895 family switch - microchip,ksz8873 + - microchip,ksz8895 # 5-port version of KSZ8895 family switch - microchip,ksz9477 - microchip,ksz9897 - microchip,ksz9896 @@ -32,12 +31,23 @@ properties: - microchip,ksz9893 - microchip,ksz9563 - microchip,ksz8563 + - microchip,ksz8567 + - microchip,lan9646 + + pinctrl-names: + items: + - const: default + - const: reset + description: + Used during reset for strap configuration. reset-gpios: description: Should be a gpio specifier for a reset line. maxItems: 1 + wakeup-source: true + microchip,synclko-125: $ref: /schemas/types.yaml#/definitions/flag description: @@ -49,13 +59,106 @@ properties: Set if the output SYNCLKO clock should be disabled. Do not mix with microchip,synclko-125. + microchip,pme-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates if the PME pin polarity is active-high. + + microchip,io-drive-strength-microamp: + description: + IO Pad Drive Strength + enum: [8000, 16000] + default: 16000 + + microchip,hi-drive-strength-microamp: + description: + High Speed Drive Strength. Controls drive strength of GMII / RGMII / + MII / RMII (except TX_CLK/REFCLKI, COL and CRS) and CLKO_25_125 lines. + enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000] + default: 24000 + + microchip,lo-drive-strength-microamp: + description: + Low Speed Drive Strength. Controls drive strength of TX_CLK / REFCLKI, + COL, CRS, LEDs, PME_N, NTRP_N, SDO and SDI/SDA/MDIO lines. + enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000] + default: 8000 + interrupts: maxItems: 1 + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + properties: + mdio-parent-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle pointing to the MDIO bus controller connected to the + secondary MDIO interface. This property should be used when + the internal MDIO bus is accessed via a secondary MDIO + interface rather than the primary management interface. + + patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + $ref: /schemas/net/ethernet-phy.yaml# + unevaluatedProperties: false + description: + Integrated PHY node + required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + + - if: + not: + properties: + compatible: + enum: + - microchip,ksz8863 + - microchip,ksz8873 + then: + $ref: dsa.yaml#/$defs/ethernet-ports + else: + patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-2]$": + $ref: dsa-port.yaml# + unevaluatedProperties: false + properties: + microchip,rmii-clk-internal: + $ref: /schemas/types.yaml#/definitions/flag + description: + When ksz88x3 is acting as clock provier (via REFCLKO) it + can select between internal and external RMII reference + clock. Internal reference clock means that the clock for + the RMII of ksz88x3 is provided by the ksz88x3 internally + and the REFCLKI pin is unconnected. For the external + reference clock, the clock needs to be fed back to ksz88x3 + via REFCLKI. + If microchip,rmii-clk-internal is set, ksz88x3 will provide + rmii reference clock internally, otherwise reference clock + should be provided externally. + dependencies: + microchip,rmii-clk-internal: [ethernet] + - if: + properties: + compatible: + contains: + const: microchip,ksz8463 + then: + properties: + straps-rxd-gpios: + description: + RXD0 and RXD1 pins, used to select SPI as bus interface. + minItems: 2 + maxItems: 2 + unevaluatedProperties: false examples: @@ -76,7 +179,6 @@ examples: pinctrl-0 = <&pinctrl_spi_ksz>; cs-gpios = <&pioC 25 0>; - id = <1>; ksz9477: switch@0 { compatible = "microchip,ksz9477"; |