diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml index 157e3bbcaf6f..26688e2302ea 100644 --- a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml @@ -52,6 +52,40 @@ properties: for a timer. type: boolean + motorcomm,rx-clk-drv-microamp: + description: | + drive strength of rx_clk rgmii pad. + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can + be configured with hardware pull-up resistors to match the SOC voltage + (usually 1.8V). + The software can read the registers to obtain the LDO voltage and configure + the legal drive strength(curren). + ===================================================== + | voltage | current Available (uA) | + | 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 | + | 3.3v | 3070 4080 4370 4680 5020 5450 5740 6140 | + ===================================================== + enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970, + 4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ] + default: 2910 + + motorcomm,rx-data-drv-microamp: + description: | + drive strength of rx_data/rx_ctl rgmii pad. + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can + be configured with hardware pull-up resistors to match the SOC voltage + (usually 1.8V). + The software can read the registers to obtain the LDO voltage and configure + the legal drive strength(curren). + ===================================================== + | voltage | current Available (uA) | + | 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 | + | 3.3v | 3070 4080 4370 4680 5020 5450 5740 6140 | + ===================================================== + enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970, + 4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ] + default: 2910 + motorcomm,tx-clk-adj-enabled: description: | This configuration is mainly to adapt to VF2 with JH7110 SoC. |