diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/qca,ar803x.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/net/qca,ar803x.yaml | 86 |
1 files changed, 76 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index 5a6c9d20c0ba..7ae5110e7aa2 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -16,19 +16,50 @@ description: | allOf: - $ref: ethernet-phy.yaml# + - if: + properties: + compatible: + contains: + enum: + - ethernet-phy-id004d.d0c0 + + then: + properties: + reg: + const: 7 # This PHY is always at MDIO address 7 in the IPQ5018 SoC + + resets: + items: + - description: + GE PHY MISC reset which triggers a reset across MDC, DSP, RX, and TX lines. + + qcom,dac-preset-short-cable: + description: + Set if this phy is connected to another phy to adjust the values for + MDAC and EDAC to adjust amplitude, bias current settings, and error + detection and correction algorithm to accommodate for short cable length. + If not set, DAC values are not modified and it is assumed the MDI output pins + of this PHY are directly connected to an RJ45 connector. + type: boolean properties: + compatible: + enum: + - ethernet-phy-id004d.d0c0 + qca,clk-out-frequency: description: Clock output frequency in Hertz. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 25000000, 50000000, 62500000, 125000000 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [25000000, 50000000, 62500000, 125000000] qca,clk-out-strength: description: Clock output driver strength. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + qca,disable-smarteee: + description: Disable Atheros SmartEEE feature. + type: boolean qca,keep-pll-enabled: description: | @@ -38,6 +69,26 @@ properties: Only supported on the AR8031. type: boolean + qca,disable-hibernation-mode: + description: | + Disable Atheros AR803X PHYs hibernation mode. If present, indicates + that the hardware of PHY will not enter power saving mode when the + cable is disconnected. And the RX_CLK always keeps outputting a + valid clock. + type: boolean + + qca,smarteee-tw-us-100m: + description: EEE Tw parameter for 100M links. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 255 + + qca,smarteee-tw-us-1g: + description: EEE Tw parameter for gigabit links. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 255 + vddio-supply: description: | RGMII I/O voltage regulator (see regulator/regulator.yaml). @@ -52,17 +103,18 @@ properties: type: object description: Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V. - allOf: - - $ref: /schemas/regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false vddh-regulator: type: object description: Dummy subnode to model the external connection of the PHY VDDH regulator to VDDIO. - allOf: - - $ref: /schemas/regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false +unevaluatedProperties: false examples: - | @@ -109,3 +161,17 @@ examples: }; }; }; + - | + #include <dt-bindings/reset/qcom,gcc-ipq5018.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ge_phy: ethernet-phy@7 { + compatible = "ethernet-phy-id004d.d0c0"; + reg = <7>; + + resets = <&gcc GCC_GEPHY_MISC_ARES>; + }; + }; |