1 files changed, 0 insertions, 51 deletions
diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
deleted file mode 100644
index 17d6819669c8..000000000000
--- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Altera SOCFPGA SoC DWMAC controller
-
-This is a variant of the dwmac/stmmac driver an inherits all descriptions
-present in Documentation/devicetree/bindings/net/stmmac.txt.
-
-The device node has additional properties:
-
-Required properties:
- - compatible	: Should contain "altr,socfpga-stmmac" along with
-		  "snps,dwmac" and any applicable more detailed
-		  designware version numbers documented in stmmac.txt
- - altr,sysmgr-syscon : Should be the phandle to the system manager node that
-   encompasses the glue register, the register offset, and the register shift.
- - altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock
-   for ptp ref clk. This affects all emacs as the clock is common.
-
-Optional properties:
-altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
-		DWMAC controller is connected emac splitter.
-phy-mode: The phy mode the ethernet operates in
-altr,sgmii-to-sgmii-converter: phandle to the TSE SGMII converter
-
-This device node has additional phandle dependency, the sgmii converter:
-
-Required properties:
- - compatible	: Should be altr,gmii-to-sgmii-2.0
- - reg-names	: Should be "eth_tse_control_port"
-
-Example:
-
-gmii_to_sgmii_converter: phy@100000240 {
-	compatible = "altr,gmii-to-sgmii-2.0";
-	reg = <0x00000001 0x00000240 0x00000008>,
-		<0x00000001 0x00000200 0x00000040>;
-	reg-names = "eth_tse_control_port";
-	clocks = <&sgmii_1_clk_0 &emac1 1 &sgmii_clk_125 &sgmii_clk_125>;
-	clock-names = "tse_pcs_ref_clk_clock_connection", "tse_rx_cdr_refclk";
-};
-
-gmac0: ethernet@ff700000 {
-	compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
-	altr,sysmgr-syscon = <&sysmgr 0x60 0>;
-	reg = <0xff700000 0x2000>;
-	interrupts = <0 115 4>;
-	interrupt-names = "macirq";
-	mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
-	clocks = <&emac_0_clk>;
-	clock-names = "stmmaceth";
-	phy-mode = "sgmii";
-	altr,gmii-to-sgmii-converter = <&gmii_to_sgmii_converter>;
-};