diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
| -rw-r--r-- | Documentation/devicetree/bindings/net/can/c_can.txt | 13 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/mediatek-net.txt | 6 |
2 files changed, 16 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt index 5a1d8b0c39e9..2d504256b0d8 100644 --- a/Documentation/devicetree/bindings/net/can/c_can.txt +++ b/Documentation/devicetree/bindings/net/can/c_can.txt @@ -11,9 +11,20 @@ Required properties: - interrupts : property with a value describing the interrupt number -Optional properties: +The following are mandatory properties for DRA7x, AM33xx and AM43xx SoCs only: - ti,hwmods : Must be "d_can<n>" or "c_can<n>", n being the instance number + +The following are mandatory properties for Keystone 2 66AK2G SoCs only: +- power-domains : Should contain a phandle to a PM domain provider node + and an args specifier containing the DCAN device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +- clocks : CAN functional clock phandle. This property is as per the + binding, + Documentation/devicetree/bindings/clock/ti,sci-clk.txt + +Optional properties: - syscon-raminit : Handle to system control region that contains the RAMINIT register, register offset to the RAMINIT register and the CAN instance number (0 offset). diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index 1d1168b805cc..214eaa9a6683 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -20,8 +20,10 @@ Required properties: "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC - power-domains: phandle to the power domain that the ethernet is part of -- resets: Should contain a phandle to the ethsys reset signal -- reset-names: Should contain the reset signal name "eth" +- resets: Should contain phandles to the ethsys reset signals +- reset-names: Should contain the names of reset signal listed in the resets + property + These are "fe", "gmac" and "ppe" - mediatek,ethsys: phandle to the syscon node that handles the port setup - mediatek,sgmiisys: phandle to the syscon node that handles the SGMII setup which is required for those SoCs equipped with SGMII such as MT7622 SoC. |