1 files changed, 0 insertions, 63 deletions
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
deleted file mode 100644
index 2030ee0dc4f9..000000000000
--- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-TI Keystone PCIe interface
-
-Keystone PCI host Controller is based on the Synopsys DesignWare PCI
-hardware version 3.65.  It shares common functions with the PCIe DesignWare
-core driver and inherits common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt
-
-Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt
-for the details of DesignWare DT bindings.  Additional properties are
-described here as well as properties that are not applicable.
-
-Required Properties:-
-
-compatibility: "ti,keystone-pcie"
-reg:	index 1 is the base address and length of DW application registers.
-	index 2 is the base address and length of PCI device ID register.
-
-pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
-	interrupt-cells: should be set to 1
-	interrupts: GIC interrupt lines connected to PCI MSI interrupt lines
-
-ti,syscon-pcie-id : phandle to the device control module required to set device
-		    id and vendor id.
-
- Example:
-	pcie_msi_intc: msi-interrupt-controller {
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
-	};
-
-pcie_intc: Interrupt controller device node for Legacy IRQ chip
-	interrupt-cells: should be set to 1
-
- Example:
-	pcie_intc: legacy-interrupt-controller {
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
-	};
-
-Optional properties:-
-	phys: phandle to generic Keystone SerDes PHY for PCI
-	phy-names: name of the generic Keystone SerDes PHY for PCI
-	  - If boot loader already does PCI link establishment, then phys and
-	    phy-names shouldn't be present.
-	interrupts: platform interrupt for error interrupts.
-
-DesignWare DT Properties not applicable for Keystone PCI
-
-1. pcie_bus clock-names not used.  Instead, a phandle to phys is used.