1 files changed, 0 insertions, 76 deletions
diff --git a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt
deleted file mode 100644
index e1bb12711fbf..000000000000
--- a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-* APM X-Gene 15Gbps Multi-purpose PHY nodes
-
-PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each
-PHY (pair of lanes) has its own node.
-
-Required properties:
-- compatible		: Shall be "apm,xgene-phy".
-- reg			: PHY memory resource is the SDS PHY access resource.
-- #phy-cells		: Shall be 1 as it expects one argument for setting
-			  the mode of the PHY. Possible values are 0 (SATA),
-			  1 (SGMII), 2 (PCIe), 3 (USB), and 4 (XFI).
-
-Optional properties:
-- status		: Shall be "ok" if enabled or "disabled" if disabled.
-			  Default is "ok".
-- clocks		: Reference to the clock entry.
-- apm,tx-eye-tuning	: Manual control to fine tune the capture of the serial
-			  bit lines from the automatic calibrated position.
-			  Two set of 3-tuple setting for each (up to 3)
-			  supported link speed on the host. Range from 0 to
-			  127 in unit of one bit period. Default is 10.
-- apm,tx-eye-direction	: Eye tuning manual control direction. 0 means sample
-			  data earlier than the nominal sampling point. 1 means
-			  sample data later than the nominal sampling point.
-			  Two set of 3-tuple setting for each (up to 3)
-			  supported link speed on the host. Default is 0.
-- apm,tx-boost-gain	: Frequency boost AC (LSB 3-bit) and DC (2-bit)
-			  gain control. Two set of 3-tuple setting for each
-			  (up to 3) supported link speed on the host. Range is
-			  between 0 to 31 in unit of dB. Default is 3.
-- apm,tx-amplitude	: Amplitude control. Two set of 3-tuple setting for
-			  each (up to 3) supported link speed on the host.
-			  Range is between 0 to 199500 in unit of uV.
-			  Default is 199500 uV.
-- apm,tx-pre-cursor1	: 1st pre-cursor emphasis taps control. Two set of
-			  3-tuple setting for each (up to 3) supported link
-			  speed on the host. Range is 0 to 273000 in unit of
-			  uV. Default is 0.
-- apm,tx-pre-cursor2	: 2st pre-cursor emphasis taps control. Two set of
-			  3-tuple setting for each (up to 3) supported link
-			  speed on the host. Range is 0 to 127400 in unit uV.
-			  Default is 0x0.
-- apm,tx-post-cursor	: Post-cursor emphasis taps control. Two set of
-			  3-tuple setting for Gen1, Gen2, and Gen3. Range is
-			  between 0 to 0x1f in unit of 18.2mV. Default is 0xf.
-- apm,tx-speed		: Tx operating speed. One set of 3-tuple for each
-			  supported link speed on the host.
-			   0 = 1-2Gbps
-			   1 = 2-4Gbps (1st tuple default)
-			   2 = 4-8Gbps
-			   3 = 8-15Gbps (2nd tuple default)
-			   4 = 2.5-4Gbps
-			   5 = 4-5Gbps
-			   6 = 5-6Gbps
-			   7 = 6-16Gbps (3rd tuple default)
-
-NOTE: PHY override parameters are board specific setting.
-
-Example:
-		phy1: phy@1f21a000 {
-			compatible = "apm,xgene-phy";
-			reg = <0x0 0x1f21a000 0x0 0x100>;
-			#phy-cells = <1>;
-		};
-
-		phy2: phy@1f22a000 {
-			compatible = "apm,xgene-phy";
-			reg = <0x0 0x1f22a000 0x0 0x100>;
-			#phy-cells = <1>;
-		};
-
-		phy3: phy@1f23a000 {
-			compatible = "apm,xgene-phy";
-			reg = <0x0 0x1f23a000 0x0 0x100>;
-			#phy-cells = <1>;
-		};