diff options
Diffstat (limited to 'Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt | 40 |
1 files changed, 0 insertions, 40 deletions
diff --git a/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt b/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt deleted file mode 100644 index 2eb9b2b69037..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt +++ /dev/null @@ -1,40 +0,0 @@ -Motorola CPCAP PMIC USB PHY binding - -Required properties: -compatible: Shall be either "motorola,cpcap-usb-phy" or - "motorola,mapphone-cpcap-usb-phy" -#phy-cells: Shall be 0 -interrupts: CPCAP PMIC interrupts used by the USB PHY -interrupt-names: Interrupt names -io-channels: IIO ADC channels used by the USB PHY -io-channel-names: IIO ADC channel names -vusb-supply: Regulator for the PHY - -Optional properties: -pinctrl: Optional alternate pin modes for the PHY -pinctrl-names: Names for optional pin modes -mode-gpios: Optional GPIOs for configuring alternate modes - -Example: -cpcap_usb2_phy: phy { - compatible = "motorola,mapphone-cpcap-usb-phy"; - pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>; - pinctrl-1 = <&usb_ulpi_pins>; - pinctrl-2 = <&usb_utmi_pins>; - pinctrl-3 = <&uart3_pins>; - pinctrl-names = "default", "ulpi", "utmi", "uart"; - #phy-cells = <0>; - interrupts-extended = < - &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 - &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 - &cpcap 48 1 - >; - interrupt-names = - "id_ground", "id_float", "se0conn", "vbusvld", - "sessvld", "sessend", "se1", "dm", "dp"; - mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH - &gpio1 0 GPIO_ACTIVE_HIGH>; - io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>; - io-channel-names = "vbus", "id"; - vusb-supply = <&vusb>; -}; |