1 files changed, 0 insertions, 106 deletions
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
deleted file mode 100644
index e11c563a65ec..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ /dev/null
@@ -1,106 +0,0 @@
-Qualcomm QMP PHY controller
-===========================
-
-QMP phy controller supports physical layer functionality for a number of
-controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
-
-Required properties:
- - compatible: compatible list, contains:
-	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
-	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
-
- - reg: offset and length of register set for PHY's common serdes block.
-
- - #clock-cells: must be 1
-    - Phy pll outputs a bunch of clocks for Tx, Rx and Pipe
-      interface (for pipe based PHYs). These clock are then gate-controlled
-      by gcc.
- - #address-cells: must be 1
- - #size-cells: must be 1
- - ranges: must be present
-
- - clocks: a list of phandles and clock-specifier pairs,
-	   one for each entry in clock-names.
- - clock-names: "cfg_ahb" for phy config clock,
-		"aux" for phy aux clock,
-		"ref" for 19.2 MHz ref clk,
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,msm8996-qmp-usb3-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-
- - resets: a list of phandles and reset controller specifier pairs,
-	   one for each entry in reset-names.
- - reset-names: "phy" for reset of phy block,
-		"common" for phy common block reset,
-		"cfg" for phy's ahb cfg block reset (Optional).
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
-		 "phy", "common", "cfg".
-		For "qcom,msm8996-qmp-usb3-phy" must contain
-		 "phy", "common".
-
- - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
- - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
-
-Optional properties:
- - vddp-ref-clk-supply: Phandle to a regulator supply to any specific refclk
-			pll block.
-
-Required nodes:
- - Each device node of QMP phy is required to have as many child nodes as
-   the number of lanes the PHY has.
-
-Required properties for child node:
- - reg: list of offset and length pairs of register sets for PHY blocks -
-	tx, rx and pcs.
-
- - #phy-cells: must be 0
-
- - clocks: a list of phandles and clock-specifier pairs,
-	   one for each entry in clock-names.
- - clock-names: Must contain following for pcie and usb qmp phys:
-		 "pipe<lane-number>" for pipe clock specific to each lane.
-
- - resets: a list of phandles and reset controller specifier pairs,
-	   one for each entry in reset-names.
- - reset-names: Must contain following for pcie qmp phys:
-		 "lane<lane-number>" for reset specific to each lane.
-
-Example:
-	phy@34000 {
-		compatible = "qcom,msm8996-qmp-pcie-phy";
-		reg = <0x34000 0x488>;
-		#clock-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
-			<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
-			<&gcc GCC_PCIE_CLKREF_CLK>;
-		clock-names = "aux", "cfg_ahb", "ref";
-
-		vdda-phy-supply = <&pm8994_l28>;
-		vdda-pll-supply = <&pm8994_l12>;
-
-		resets = <&gcc GCC_PCIE_PHY_BCR>,
-			<&gcc GCC_PCIE_PHY_COM_BCR>,
-			<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
-		reset-names = "phy", "common", "cfg";
-
-		pciephy_0: lane@35000 {
-			reg = <0x35000 0x130>,
-				<0x35200 0x200>,
-				<0x35400 0x1dc>;
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-			clock-names = "pipe0";
-			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
-			reset-names = "lane0";
-		};
-
-		pciephy_1: lane@36000 {
-		...
-		...
-	};