diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl')
11 files changed, 900 insertions, 155 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index 450240570314..990b78765427 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -44,6 +44,7 @@ properties: - allwinner,sun8i-r40-pinctrl - allwinner,sun8i-v3-pinctrl - allwinner,sun8i-v3s-pinctrl + - allwinner,sun8i-v853-pinctrl - allwinner,sun9i-a80-pinctrl - allwinner,sun9i-a80-r-pinctrl - allwinner,sun20i-d1-pinctrl @@ -183,6 +184,18 @@ allOf: properties: compatible: enum: + - allwinner,sun8i-v853-pinctrl + + then: + properties: + interrupts: + minItems: 8 + maxItems: 8 + + - if: + properties: + compatible: + enum: - allwinner,sun20i-d1-pinctrl then: diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml index 1bb386b42039..a7ede29c1444 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml @@ -145,40 +145,40 @@ additionalProperties: examples: - | - #include <dt-bindings/clock/at91.h> - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/pinctrl/at91.h> - - pinctrl@fffff400 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; - ranges = <0xfffff400 0xfffff400 0x600>; - - atmel,mux-mask = < - /* A B */ - 0xffffffff 0xffc00c3b /* pioA */ - 0xffffffff 0x7fff3ccf /* pioB */ - 0xffffffff 0x007fffff /* pioC */ - >; - - dbgu { - pinctrl_dbgu: dbgu-0 { - atmel,pins = - <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP - AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; - }; - }; - - pioA: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; - }; - }; + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/pinctrl/at91.h> + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; + ranges = <0xfffff400 0xfffff400 0x600>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc00c3b /* pioA */ + 0xffffffff 0x7fff3ccf /* pioB */ + 0xffffffff 0x007fffff /* pioC */ + >; + + dbgu { + dbgu-0 { + atmel,pins = + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml new file mode 100644 index 000000000000..26dfe7e7735a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml @@ -0,0 +1,575 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7988-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7988 Pin Controller + +maintainers: + - Sean Wang <sean.wang@kernel.org> + +description: + The MediaTek's MT7988 Pin controller is used to control SoC pins. + +properties: + compatible: + enum: + - mediatek,mt7988-pinctrl + + reg: + minItems: 7 + maxItems: 7 + + reg-names: + items: + - const: gpio + - const: iocfg_tr + - const: iocfg_br + - const: iocfg_rb + - const: iocfg_lb + - const: iocfg_tl + - const: eint + + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + minItems: 1 + maxItems: 5 + description: + GPIO valid number range. + + interrupt-controller: true + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - reg-names + - gpio-controller + - "#gpio-cells" + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + properties: + mux: + type: object + additionalProperties: false + $ref: /schemas/pinctrl/pinmux-node.yaml + description: | + pinmux configuration nodes. + + The following table shows the effective values of "group", "function" + properties and chip pinout pins + + groups function pins (in pin#) + --------------------------------------------------------------------- + "tops_jtag0_0" "jtag" 0, 1, 2, 3, 4 + "wo0_jtag" "jtag" 50, 51, 52, 53, 54 + "wo1_jtag" "jtag" 50, 51, 52, 53, 54 + "wo2_jtag" "jtag" 50, 51, 52, 53, 54 + "jtag" "jtag" 58, 59, 60, 61, 62 + "tops_jtag0_1" "jtag" 58, 59, 60, 61, 62 + "int_usxgmii" "int_usxgmii" 2, 3 + "pwm0" "pwm" 57 + "pwm1" "pwm" 21 + "pwm2" "pwm" 80 + "pwm2_0" "pwm" 58 + "pwm3" "pwm" 81 + "pwm3_0" "pwm" 59 + "pwm4" "pwm" 82 + "pwm4_0" "pwm" 60 + "pwm5" "pwm" 83 + "pwm5_0" "pwm" 61 + "pwm6" "pwm" 69 + "pwm6_0" "pwm" 62 + "pwm7" "pwm" 70 + "pwm7_0" "pwm" 4 + "dfd" "dfd" 0, 1, 2, 3, 4 + "xfi_phy0_i2c0" "i2c" 0, 1 + "xfi_phy1_i2c0" "i2c" 0, 1 + "xfi_phy_pll_i2c0" "i2c" 3, 4 + "xfi_phy_pll_i2c1" "i2c" 3, 4 + "i2c0_0" "i2c" 5, 6 + "i2c1_sfp" "i2c" 5, 6 + "xfi_pextp_phy0_i2c" "i2c" 5, 6 + "xfi_pextp_phy1_i2c" "i2c" 5, 6 + "i2c0_1" "i2c" 15, 16 + "u30_phy_i2c0" "i2c" 15, 16 + "u32_phy_i2c0" "i2c" 15, 16 + "xfi_phy0_i2c1" "i2c" 15, 16 + "xfi_phy1_i2c1" "i2c" 15, 16 + "xfi_phy_pll_i2c2" "i2c" 15, 16 + "i2c1_0" "i2c" 17, 18 + "u30_phy_i2c1" "i2c" 17, 18 + "u32_phy_i2c1" "i2c" 17, 18 + "xfi_phy_pll_i2c3" "i2c" 17, 18 + "sgmii0_i2c" "i2c" 17, 18 + "sgmii1_i2c" "i2c" 17, 18 + "i2c1_2" "i2c" 69, 70 + "i2c2_0" "i2c" 69, 70 + "i2c2_1" "i2c" 71, 72 + "mdc_mdio0" "eth" 5, 6 + "2p5g_ext_mdio" "eth" 28, 29 + "gbe_ext_mdio" "eth" 30, 31 + "mdc_mdio1" "eth" 69, 70 + "pcie_wake_n0_0" "pcie" 7 + "pcie_clk_req_n0_0" "pcie" 8 + "pcie_wake_n3_0" "pcie" 9 + "pcie_clk_req_n3" "pcie" 10 + "pcie_clk_req_n0_1" "pcie" 10 + "pcie_p0_phy_i2c" "pcie" 7, 8 + "pcie_p1_phy_i2c" "pcie" 7, 8 + "pcie_p3_phy_i2c" "pcie" 9, 10 + "pcie_p2_phy_i2c" "pcie" 7, 8 + "ckm_phy_i2c" "pcie" 9, 10 + "pcie_wake_n0_1" "pcie" 13 + "pcie_wake_n3_1" "pcie" 14 + "pcie_2l_0_pereset" "pcie" 19 + "pcie_1l_1_pereset" "pcie" 20 + "pcie_clk_req_n2_1" "pcie" 63 + "pcie_2l_1_pereset" "pcie" 73 + "pcie_1l_0_pereset" "pcie" 74 + "pcie_wake_n1_0" "pcie" 75 + "pcie_clk_req_n1" "pcie" 76 + "pcie_wake_n2_0" "pcie" 77 + "pcie_clk_req_n2_0" "pcie" 78 + "pcie_wake_n2_1" "pcie" 79 + "pmic" "pmic" 11 + "watchdog" "watchdog" 12 + "spi0_wp_hold" "spi" 22, 23 + "spi0" "spi" 24, 25, 26, 27 + "spi1" "spi" 28, 29, 30, 31 + "spi2" "spi" 32, 33, 34, 35 + "spi2_wp_hold" "spi" 36, 37 + "snfi" "flash" 22, 23, 24, 25, 26, 27 + "emmc_45" "flash" 21, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37 + "sdcard" "flash" 32, 33, 34, 35, 36, 37 + "emmc_51" "flash" 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49 + "uart2" "uart" 0, 1, 2, 3 + "tops_uart0_0" "uart" 22, 23 + "uart2_0" "uart" 28, 29, 30, 31 + "uart1_0" "uart" 32, 33, 34, 35 + "uart2_1" "uart" 32, 33, 34, 35 + "net_wo0_uart_txd_0" "uart" 28 + "net_wo1_uart_txd_0" "uart" 29 + "net_wo2_uart_txd_0" "uart" 30 + "tops_uart1_0" "uart" 28, 29 + "tops_uart0_1" "uart" 30, 31 + "tops_uart1_1" "uart" 36, 37 + "uart0" "uart" 55, 56 + "tops_uart0_2" "uart" 55, 56 + "uart2_2" "uart" 50, 51, 52, 53 + "uart1_1" "uart" 58, 59, 60, 61 + "uart2_3" "uart" 58, 59, 60, 61 + "uart1_2" "uart" 80, 81, 82, 83 + "uart1_2_lite" "uart" 80, 81 + "tops_uart1_2" "uart" 80, 81 + "net_wo0_uart_txd_1" "uart" 80 + "net_wo1_uart_txd_1" "uart" 81 + "net_wo2_uart_txd_1" "uart" 82 + "udi" "udi" 32, 33, 34, 35, 36 + "i2s" "audio" 50, 51, 52, 53, 54 + "pcm" "audio" 50, 51, 52, 53 + "gbe0_led1" "led" 58 + "gbe1_led1" "led" 59 + "gbe2_led1" "led" 60 + "gbe3_led1" "led" 61 + "2p5gbe_led1" "led" 62 + "gbe0_led0" "led" 64 + "gbe1_led0" "led" 65 + "gbe2_led0" "led" 66 + "gbe3_led0" "led" 67 + "2p5gbe_led0" "led" 68 + "drv_vbus_p1" "usb" 63 + "drv_vbus" "usb" 79 + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [audio, dfd, eth, flash, i2c, int_usxgmii, jtag, led, pcie, pmic, pwm, spi, + uart, udi, usb, watchdog] + groups: + description: + An array of strings. Each string contains the name of a group. + + required: + - function + - groups + + allOf: + - if: + properties: + function: + const: audio + then: + properties: + groups: + enum: [i2s, pcm] + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag, tops_jtag0_0, tops_jtag0_1, wo0_jtag, wo1_jtag, wo2_jtag] + - if: + properties: + function: + const: int_usxgmii + then: + properties: + groups: + const: int_usxgmii + - if: + properties: + function: + const: dfd + then: + properties: + groups: + const: dfd + - if: + properties: + function: + const: flash + then: + properties: + groups: + enum: [emmc_45, emmc_51, sdcard, snfi] + - if: + properties: + function: + const: eth + then: + properties: + groups: + enum: [2p5g_ext_mdio, gbe_ext_mdio, mdc_mdio0, mdc_mdio1] + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [xfi_phy0_i2c0, xfi_phy1_i2c0, xfi_phy_pll_i2c0, + xfi_phy_pll_i2c1, i2c0_0, i2c1_sfp, xfi_pextp_phy0_i2c, + xfi_pextp_phy1_i2c, i2c0_1, u30_phy_i2c0, u32_phy_i2c0, + xfi_phy0_i2c1, xfi_phy1_i2c1, xfi_phy_pll_i2c2, i2c1_0, + u30_phy_i2c1, u32_phy_i2c1, xfi_phy_pll_i2c3, sgmii0_i2c, + sgmii1_i2c, i2c1_2, i2c2_0, i2c2_1] + - if: + properties: + function: + const: led + then: + properties: + groups: + enum: [2p5gbe_led0, 2p5gbe_led1, gbe0_led0, gbe0_led1, gbe1_led0, gbe1_led1, + gbe2_led0, gbe2_led1, gbe3_led0, gbe3_led1, wf5g_led0, wf5g_led1] + - if: + properties: + function: + const: pcie + then: + properties: + groups: + items: + enum: [pcie_wake_n0_0, pcie_clk_req_n0_0, pcie_wake_n3_0, + pcie_clk_req_n3, pcie_p0_phy_i2c, pcie_p1_phy_i2c, + pcie_p3_phy_i2c, pcie_p2_phy_i2c, ckm_phy_i2c, + pcie_wake_n0_1, pcie_wake_n3_1, pcie_2l_0_pereset, + pcie_1l_1_pereset, pcie_clk_req_n2_1, pcie_2l_1_pereset, + pcie_1l_0_pereset, pcie_wake_n1_0, pcie_clk_req_n1, + pcie_wake_n2_0, pcie_clk_req_n2_0, pcie_wake_n2_1, + pcie_clk_req_n0_1] + maxItems: 3 + - if: + properties: + function: + const: pmic + then: + properties: + groups: + const: pmic + - if: + properties: + function: + const: pwm + then: + properties: + groups: + items: + enum: [pwm0, pwm1, pwm2, pwm2_0, pwm3, pwm3_0, pwm4, pwm4_0, pwm5, pwm5_0, + pwm6, pwm6_0, pwm7, pwm7_0] + maxItems: 2 + - if: + properties: + function: + const: spi + then: + properties: + groups: + items: + enum: [spi0, spi0_wp_hold, spi1, spi2, spi2_wp_hold] + maxItems: 2 + - if: + properties: + function: + const: uart + then: + properties: + groups: + items: + enum: [net_wo0_uart_txd_0, net_wo0_uart_txd_1, net_wo1_uart_txd_0, + net_wo1_uart_txd_1, net_wo2_uart_txd_0, net_wo2_uart_txd_1, + tops_uart0_0, tops_uart0_1, tops_uart0_2, tops_uart1_0, + tops_uart1_1, tops_uart1_2, uart0, uart1_0, uart1_1, uart1_2, + uart1_2_lite, uart2, uart2_0, uart2_1, uart2_3] + maxItems: 2 + - if: + properties: + function: + const: watchdog + then: + properties: + groups: + const: watchdog + - if: + properties: + function: + const: udi + then: + properties: + groups: + const: udi + - if: + properties: + function: + const: usb + then: + properties: + groups: + items: + enum: [drv_vbus, drv_vbus_p1] + maxItems: 1 + + patternProperties: + '^conf(-[-a-z]*)?$': + type: object + additionalProperties: false + description: + pinconf configuration nodes. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + An array of strings. Each string contains the name of a pin. + items: + enum: [UART2_RXD, UART2_TXD, UART2_CTS, UART2_RTS, GPIO_A, SMI_0_MDC, + SMI_0_MDIO, PCIE30_2L_0_WAKE_N, PCIE30_2L_0_CLKREQ_N, + PCIE30_1L_1_WAKE_N, PCIE30_1L_1_CLKREQ_N, GPIO_P, WATCHDOG, + GPIO_RESET, GPIO_WPS, PMIC_I2C_SCL, PMIC_I2C_SDA, I2C_1_SCL, + I2C_1_SDA, PCIE30_2L_0_PRESET_N, PCIE30_1L_1_PRESET_N, PWMD1, + SPI0_WP, SPI0_HOLD, SPI0_CSB, SPI0_MISO, SPI0_MOSI, SPI0_CLK, + SPI1_CSB, SPI1_MISO, SPI1_MOSI, SPI1_CLK, SPI2_CLK, SPI2_MOSI, + SPI2_MISO, SPI2_CSB, SPI2_HOLD, SPI2_WP, EMMC_RSTB, EMMC_DSL, + EMMC_CK, EMMC_CMD, EMMC_DATA_7, EMMC_DATA_6, EMMC_DATA_5, + EMMC_DATA_4, EMMC_DATA_3, EMMC_DATA_2, EMMC_DATA_1, + EMMC_DATA_0, PCM_FS_I2S_LRCK, PCM_CLK_I2S_BCLK, + PCM_DRX_I2S_DIN, PCM_DTX_I2S_DOUT, PCM_MCK_I2S_MCLK, + UART0_RXD, UART0_TXD, PWMD0, JTAG_JTDI, JTAG_JTDO, JTAG_JTMS, + JTAG_JTCLK, JTAG_JTRST_N, USB_DRV_VBUS_P1, LED_A, LED_B, LED_C, + LED_D, LED_E, GPIO_B, GPIO_C, I2C_2_SCL, I2C_2_SDA, + PCIE30_2L_1_PRESET_N, PCIE30_1L_0_PRESET_N, + PCIE30_2L_1_WAKE_N, PCIE30_2L_1_CLKREQ_N, + PCIE30_1L_0_WAKE_N, PCIE30_1L_0_CLKREQ_N, USB_DRV_VBUS_P0, + UART1_RXD, UART1_TXD, UART1_CTS, UART1_RTS] + maxItems: 84 + + bias-disable: true + + bias-pull-up: + oneOf: + - type: boolean + description: normal pull up. + - enum: [100, 101, 102, 103] + description: + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. + + bias-pull-down: + oneOf: + - type: boolean + description: normal pull down. + - enum: [100, 101, 102, 103] + description: + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. + + input-enable: true + + input-disable: true + + output-enable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + mediatek,pull-up-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull up settings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull down settings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + required: + - pins + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt65xx.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pio: pinctrl@1001f000 { + compatible = "mediatek,mt7988-pinctrl"; + reg = <0 0x1001f000 0 0x1000>, + <0 0x11c10000 0 0x1000>, + <0 0x11d00000 0 0x1000>, + <0 0x11d20000 0 0x1000>, + <0 0x11e00000 0 0x1000>, + <0 0x11f00000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "gpio", "iocfg_tr", + "iocfg_br", "iocfg_rb", + "iocfg_lb", "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 84>; + interrupt-controller; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + + i2c0_pins: i2c0-g0-pins { + mux { + function = "i2c"; + groups = "i2c0_1"; + }; + }; + + mdio0_pins: mdio0-pins { + mux { + function = "eth"; + groups = "mdc_mdio0"; + }; + + conf { + pins = "SMI_0_MDC", "SMI_0_MDIO"; + drive-strength = <8>; + }; + }; + + mmc0_pins_emmc_51: mmc0-emmc-51-pins { + mux { + function = "flash"; + groups = "emmc_51"; + }; + }; + + mmc0_pins_sdcard: mmc0-sdcard-pins { + mux { + function = "flash"; + groups = "sdcard"; + }; + }; + + pcie0_pins: pcie0-pins { + mux { + function = "pcie"; + groups = "pcie_2l_0_pereset", "pcie_clk_req_n0_0", + "pcie_wake_n0_0"; + }; + }; + + pcie1_pins: pcie1-pins { + mux { + function = "pcie"; + groups = "pcie_2l_1_pereset", "pcie_clk_req_n1", + "pcie_wake_n1_0"; + }; + }; + + pcie2_pins: pcie2-pins { + mux { + function = "pcie"; + groups = "pcie_1l_0_pereset", "pcie_clk_req_n2_0", + "pcie_wake_n2_0"; + }; + }; + + pcie3_pins: pcie3-pins { + mux { + function = "pcie"; + groups = "pcie_1l_1_pereset", "pcie_clk_req_n3", + "pcie_wake_n3_0"; + }; + }; + + uart0_pins: uart0-pins { + mux { + function = "uart"; + groups = "uart0"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml index 5e64a232fc7a..df284d3645c1 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml @@ -79,8 +79,8 @@ $defs: qdss_cti_trig_out_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_tracectl_a, qdss_tracedata_a, qspi_clk, qspi_cs, qspi_data, resout, rx0, rx1, rx2, sdc_clk, sdc_cmd, - sdc_data, spi0, spi1, spi10, spi11, tsens_max, uart0, uart1, - wci_txd, wci_rxd, wsi_clk, wsi_data ] + sdc_data, spi0_cs, spi0_clk, spi0_miso, spi0_mosi, spi1, spi10, + spi11, tsens_max, uart0, uart1, wci_txd, wci_rxd, wsi_clk, wsi_data ] required: - pins diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8917-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8917-pinctrl.yaml new file mode 100644 index 000000000000..16d0c010e581 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8917-pinctrl.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8917-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8917 TLMM pin controller + +maintainers: + - Barnabas Czeman <barnabas.czeman@mainlining.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8917 SoC. + +properties: + compatible: + const: qcom,msm8917-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 66 + + gpio-line-names: + maxItems: 134 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8917-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8917-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8917-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-3])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, + qdsd_data1, qdsd_data2, qdsd_data3 ] + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ accel_int, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, + atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, atest_combodac_to_gpio_native, + atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native, + atest_tsens, atest_wlan0, atest_wlan1, audio_ref, + audio_reset, bimc_dte0, bimc_dte1, blsp6_spi, blsp8_spi, + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, + blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_spi1, blsp_spi2, + blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, + blsp_spi8, blsp_uart1, blsp_uart2, blsp_uart3, blsp_uart4, + blsp_uart5, blsp_uart6, blsp_uart7, blsp_uart8, cam0_ldo, + cam1_rst, cam1_standby, cam2_rst, cam2_standby, cam_mclk, + cci_async, cci_i2c, cci_timer0, cci_timer1, cdc_pdm0, + codec_int1, codec_int2, codec_mad, coex_uart, cri_trng, + cri_trng0, cri_trng1, dbg_out, dmic0_clk, dmic0_data, + ebi_cdc, ebi_ch0, ext_lpass, forced_usb, fp_gpio, fp_int, + gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, + gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gpio, + gsm0_tx, key_focus, key_snapshot, key_volp, ldo_en, + ldo_update, lpass_slimbus, lpass_slimbus0, lpass_slimbus1, + m_voc, mag_int, mdp_vsync, mipi_dsi0, modem_tsync, nav_pps, + nav_pps_in_a, nav_pps_in_b, nav_tsync, nfc_pwr, ov_ldo, + pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, pri_mi2s_mclk_a, + pri_mi2s_mclk_b, pri_mi2s_ws, prng_rosc, + pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, sd_write, sdcard_det, + sec_mi2s, sec_mi2s_mclk_a, sec_mi2s_mclk_b, sensor_rst, + smb_int, ssbi_wtr1, ts_resout, ts_sample, uim1_clk, + uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, uim_batt, us_emitter, us_euro, + wcss_bt, wcss_fm, wcss_wlan, wcss_wlan0, wcss_wlan1, + wcss_wlan2, webcam_rst, webcam_standby, wsa_io, wsa_irq ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8917-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 134>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml index fc6c65fea73b..90bd49d87d2e 100644 --- a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml @@ -159,30 +159,30 @@ additionalProperties: false examples: - | - pinctrl@4e000 { - compatible = "realtek,rtd1315e-pinctrl"; - reg = <0x4e000 0x130>; - - emmc-hs200-pins { - pins = "emmc_clk", - "emmc_cmd", - "emmc_data_0", - "emmc_data_1", - "emmc_data_2", - "emmc_data_3", - "emmc_data_4", - "emmc_data_5", - "emmc_data_6", - "emmc_data_7"; - function = "emmc"; - realtek,drive-strength-p = <0x2>; - realtek,drive-strength-n = <0x2>; - }; - - i2c-0-pins { - pins = "gpio_12", - "gpio_13"; - function = "i2c0"; - drive-strength = <4>; - }; - }; + pinctrl@4e000 { + compatible = "realtek,rtd1315e-pinctrl"; + reg = <0x4e000 0x130>; + + emmc-hs200-pins { + pins = "emmc_clk", + "emmc_cmd", + "emmc_data_0", + "emmc_data_1", + "emmc_data_2", + "emmc_data_3", + "emmc_data_4", + "emmc_data_5", + "emmc_data_6", + "emmc_data_7"; + function = "emmc"; + realtek,drive-strength-p = <0x2>; + realtek,drive-strength-n = <0x2>; + }; + + i2c-0-pins { + pins = "gpio_12", + "gpio_13"; + function = "i2c0"; + drive-strength = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml index f07361d60acd..b6211c8544ca 100644 --- a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml @@ -158,30 +158,30 @@ additionalProperties: false examples: - | - pinctrl@4e000 { - compatible = "realtek,rtd1319d-pinctrl"; - reg = <0x4e000 0x130>; - - emmc-hs200-pins { - pins = "emmc_clk", - "emmc_cmd", - "emmc_data_0", - "emmc_data_1", - "emmc_data_2", - "emmc_data_3", - "emmc_data_4", - "emmc_data_5", - "emmc_data_6", - "emmc_data_7"; - function = "emmc"; - realtek,drive-strength-p = <0x2>; - realtek,drive-strength-n = <0x2>; - }; - - i2c-0-pins { - pins = "gpio_12", - "gpio_13"; - function = "i2c0"; - drive-strength = <4>; - }; - }; + pinctrl@4e000 { + compatible = "realtek,rtd1319d-pinctrl"; + reg = <0x4e000 0x130>; + + emmc-hs200-pins { + pins = "emmc_clk", + "emmc_cmd", + "emmc_data_0", + "emmc_data_1", + "emmc_data_2", + "emmc_data_3", + "emmc_data_4", + "emmc_data_5", + "emmc_data_6", + "emmc_data_7"; + function = "emmc"; + realtek,drive-strength-p = <0x2>; + realtek,drive-strength-n = <0x2>; + }; + + i2c-0-pins { + pins = "gpio_12", + "gpio_13"; + function = "i2c0"; + drive-strength = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml index 671e4ec84624..e88bc649cc73 100644 --- a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml @@ -157,30 +157,30 @@ additionalProperties: false examples: - | - pinctrl@4e000 { - compatible = "realtek,rtd1619b-pinctrl"; - reg = <0x4e000 0x130>; - - emmc-hs200-pins { - pins = "emmc_clk", - "emmc_cmd", - "emmc_data_0", - "emmc_data_1", - "emmc_data_2", - "emmc_data_3", - "emmc_data_4", - "emmc_data_5", - "emmc_data_6", - "emmc_data_7"; - function = "emmc"; - realtek,drive-strength-p = <0x2>; - realtek,drive-strength-n = <0x2>; - }; - - i2c-0-pins { - pins = "gpio_12", - "gpio_13"; - function = "i2c0"; - drive-strength = <4>; - }; - }; + pinctrl@4e000 { + compatible = "realtek,rtd1619b-pinctrl"; + reg = <0x4e000 0x130>; + + emmc-hs200-pins { + pins = "emmc_clk", + "emmc_cmd", + "emmc_data_0", + "emmc_data_1", + "emmc_data_2", + "emmc_data_3", + "emmc_data_4", + "emmc_data_5", + "emmc_data_6", + "emmc_data_7"; + function = "emmc"; + realtek,drive-strength-p = <0x2>; + realtek,drive-strength-n = <0x2>; + }; + + i2c-0-pins { + pins = "gpio_12", + "gpio_13"; + function = "i2c0"; + drive-strength = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index a1805b6e3f63..768bb3c2b456 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -26,6 +26,7 @@ properties: - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} - renesas,r9a08g045-pinctrl # RZ/G3S + - renesas,r9a09g047-pinctrl # RZ/G3E - renesas,r9a09g057-pinctrl # RZ/V2H(P) - items: @@ -125,7 +126,7 @@ additionalProperties: drive-push-pull: true renesas,output-impedance: description: - Output impedance for pins on the RZ/V2H(P) SoC. The value provided by this + Output impedance for pins on the RZ/{G3E,V2H(P)} SoC. The value provided by this property corresponds to register bit values that can be set in the PFC_IOLH_mn register, which adjusts the drive strength value and is pin-dependent. $ref: /schemas/types.yaml#/definitions/uint32 @@ -142,7 +143,9 @@ allOf: properties: compatible: contains: - const: renesas,r9a09g057-pinctrl + enum: + - renesas,r9a09g047-pinctrl + - renesas,r9a09g057-pinctrl then: properties: resets: diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml index 6a23d845f1f2..80a2b1934849 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -44,6 +44,7 @@ properties: - rockchip,rk3328-pinctrl - rockchip,rk3368-pinctrl - rockchip,rk3399-pinctrl + - rockchip,rk3562-pinctrl - rockchip,rk3568-pinctrl - rockchip,rk3576-pinctrl - rockchip,rk3588-pinctrl diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml index de6c10ba36c4..70548cb37ada 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml @@ -180,38 +180,31 @@ additionalProperties: false examples: - | #include <dt-bindings/pinctrl/pinctrl-zynq.h> - pinctrl0: pinctrl@700 { - compatible = "xlnx,pinctrl-zynq"; - reg = <0x700 0x200>; - syscon = <&slcr>; - - pinctrl_uart1_default: uart1-default { - mux { - groups = "uart1_10_grp"; - function = "uart1"; - }; - - conf { - groups = "uart1_10_grp"; - slew-rate = <0>; - power-source = <IO_STANDARD_LVCMOS18>; - }; - - conf-rx { - pins = "MIO49"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO48"; - bias-disable; - }; - }; + pinctrl@700 { + compatible = "xlnx,pinctrl-zynq"; + reg = <0x700 0x200>; + syscon = <&slcr>; + + uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; }; - - uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_default>; - }; - -... |