diff options
Diffstat (limited to 'Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml | 66 |
1 files changed, 52 insertions, 14 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index 66b1e3efdaa3..843679c557e7 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 remote processor controller @@ -25,11 +25,18 @@ properties: maxItems: 3 resets: - maxItems: 1 + minItems: 1 + maxItems: 2 + + reset-names: + items: + - const: mcu_rst + - const: hold_boot + minItems: 1 st,syscfg-holdboot: description: remote processor reset hold boot - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: Phandle of syscon block @@ -37,9 +44,10 @@ properties: - description: The field mask of the hold boot st,syscfg-tz: + deprecated: true description: Reference to the system configuration which holds the RCC trust zone mode - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: Phandle of syscon block @@ -72,9 +80,9 @@ properties: ready for shutdown - description: | A channel (d) used by the local proc to notify the remote proc that it - has to stop interprocessor communnication. + has to stop interprocessor communication. Unidirectional channel: - - from local to remote, where ACK from the remote means that communnication + - from local to remote, where ACK from the remote means that communication as been stopped on the remote side. minItems: 1 @@ -95,7 +103,7 @@ properties: (see ../reserved-memory/reserved-memory.txt) st,syscfg-pdds: - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array description: | Reference to the system configuration which holds the remote items: @@ -105,7 +113,7 @@ properties: - description: The field mask of the PDDS selection st,syscfg-m4-state: - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array description: | Reference to the tamp register which exposes the Cortex-M4 state. items: @@ -115,7 +123,7 @@ properties: - description: The field mask of the Cortex-M4 state st,syscfg-rsc-tbl: - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array description: | Reference to the tamp register which references the Cortex-M4 resource table address. @@ -131,26 +139,56 @@ properties: If defined, when remoteproc is probed, it loads the default firmware and starts the remote processor. + firmware-name: + maxItems: 1 + description: Default name of the remote processor firmware. + required: - compatible - reg - resets - - st,syscfg-holdboot - - st,syscfg-tz + +allOf: + - if: + properties: + reset-names: + not: + contains: + const: hold_boot + then: + required: + - st,syscfg-holdboot + else: + properties: + st,syscfg-holdboot: false additionalProperties: false examples: - | #include <dt-bindings/reset/stm32mp1-resets.h> - m4_rproc: m4@10000000 { + m4@10000000 { compatible = "st,stm32mp1-m4"; reg = <0x10000000 0x40000>, <0x30000000 0x40000>, <0x38000000 0x10000>; resets = <&rcc MCU_R>; + reset-names = "mcu_rst"; + /* Hold boot managed using system config*/ st,syscfg-holdboot = <&rcc 0x10C 0x1>; - st,syscfg-tz = <&rcc 0x000 0x1>; + st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; + st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; + }; + - | + #include <dt-bindings/reset/stm32mp1-resets.h> + m4@10000000 { + compatible = "st,stm32mp1-m4"; + reg = <0x10000000 0x40000>, + <0x30000000 0x40000>, + <0x38000000 0x10000>; + /* Hold boot managed using SCMI reset controller */ + resets = <&scmi MCU_R>, <&scmi MCU_HOLD_BOOT_R>; + reset-names = "mcu_rst", "hold_boot"; st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; }; |