1 files changed, 0 insertions, 98 deletions
diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
deleted file mode 100644
index 5e1d08de18a5..000000000000
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-RT5682 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : "realtek,rt5682" or "realtek,rt5682i"
-
-- reg : The I2C address of the device.
-
-- AVDD-supply: phandle to the regulator supplying analog power through the
-  AVDD pin
-
-- MICVDD-supply: phandle to the regulator supplying power for the microphone
-  bias through the MICVDD pin. Either MICVDD or VBAT should be present.
-
-- VBAT-supply: phandle to the regulator supplying battery power through the
-  VBAT pin. Either MICVDD or VBAT should be present.
-
-- DBVDD-supply: phandle to the regulator supplying I/O power through the DBVDD
-  pin.
-
-- LDO1-IN-supply: phandle to the regulator supplying power to the digital core
-  and charge pump through the LDO1_IN pin.
-
-Optional properties:
-
-- interrupts : The CODEC's interrupt output.
-
-- realtek,dmic1-data-pin
-  0: dmic1 is not used
-  1: using GPIO2 pin as dmic1 data pin
-  2: using GPIO5 pin as dmic1 data pin
-
-- realtek,dmic1-clk-pin
-  0: using GPIO1 pin as dmic1 clock pin
-  1: using GPIO3 pin as dmic1 clock pin
-
-- realtek,jd-src
-  0: No JD is used
-  1: using JD1 as JD source
-
-- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
-
-- realtek,btndet-delay
-  The debounce delay for push button.
-  The delay time is realtek,btndet-delay value multiple of 8.192 ms.
-  If absent, the default is 16.
-
-- #clock-cells : Should be set to '<1>',  wclk and bclk sources provided.
-- clock-output-names : Name given for DAI clocks output.
-
-- clocks : phandle and clock specifier for codec MCLK.
-- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
-
-- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of
-  the particular DMIC.
-
-- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
-  the particular DMIC.
-
-- realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
-
-- #sound-dai-cells: Should be set to '<1>'.
-
-Pins on the device (for linking into audio routes) for RT5682:
-
-  * DMIC L1
-  * DMIC R1
-  * IN1P
-  * HPOL
-  * HPOR
-
-Example:
-
-rt5682 {
-	compatible = "realtek,rt5682i";
-	reg = <0x1a>;
-	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
-	realtek,ldo1-en-gpios =
-		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-	realtek,dmic1-data-pin = <1>;
-	realtek,dmic1-clk-pin = <1>;
-	realtek,jd-src = <1>;
-	realtek,btndet-delay = <16>;
-
-	#clock-cells = <1>;
-	clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
-
-	clocks = <&osc>;
-	clock-names = "mclk";
-
-	AVDD-supply = <&avdd_reg>;
-	MICVDD-supply = <&micvdd_reg>;
-	DBVDD-supply = <&dbvdd_reg>;
-	LDO1-IN-supply = <&ldo1_in_reg>;
-};