1 files changed, 152 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
new file mode 100644
index 000000000000..636338d24bdf
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/microchip,mpfs-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip FPGA {Q,}SPI Controllers
+
+description:
+  SPI and QSPI controllers on Microchip PolarFire SoC and the "soft"/
+  fabric IP cores they are based on
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - microchip,mpfs-qspi
+              - microchip,pic64gx-qspi
+          - const: microchip,coreqspi-rtl-v2
+      - enum:
+          - microchip,coreqspi-rtl-v2 # FPGA QSPI
+          - microchip,corespi-rtl-v5 # FPGA CoreSPI
+          - microchip,mpfs-spi
+      - items:
+          - const: microchip,pic64gx-spi
+          - const: microchip,mpfs-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  microchip,apb-datawidth:
+    description: APB bus data width in bits.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32]
+    default: 8
+
+  microchip,frame-size:
+    description: |
+      Number of bits per SPI frame, as configured in Libero.
+      In Motorola and TI modes, this corresponds directly
+      to the requested frame size. For NSC mode this is set
+      to 9 + the required data frame size.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 4
+    maximum: 32
+    default: 8
+
+  microchip,protocol-configuration:
+    description: CoreSPI protocol selection. Determines operating mode
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - motorola
+      - ti
+      - nsc
+    default: motorola
+
+  microchip,motorola-mode:
+    description: Motorola SPI mode selection
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 3
+
+  microchip,ssel-active:
+    description: |
+      Keep SSEL asserted between frames when using the Motorola protocol.
+      When present, the controller keeps SSEL active across contiguous
+      transfers and deasserts only when the overall transfer completes.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,mpfs-spi
+    then:
+      properties:
+        num-cs:
+          default: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,mpfs-spi
+      not:
+        required:
+          - cs-gpios
+    then:
+      properties:
+        num-cs:
+          maximum: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,corespi-rtl-v5
+    then:
+      properties:
+        num-cs:
+          minimum: 1
+          maximum: 8
+          default: 8
+
+        fifo-depth:
+          minimum: 1
+          maximum: 32
+          default: 4
+
+    else:
+      properties:
+        microchip,apb-datawidth: false
+        microchip,frame-size: false
+        microchip,protocol-configuration: false
+        microchip,motorola-mode: false
+        microchip,ssel-active: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    spi@20108000 {
+        compatible = "microchip,mpfs-spi";
+        reg = <0x20108000 0x1000>;
+        clocks = <&clkcfg CLK_SPI0>;
+        interrupt-parent = <&plic>;
+        interrupts = <54>;
+    };
+...