diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml | 31 |
1 files changed, 25 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 9a60c0664bbe..8b6e8fc009db 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -8,12 +8,13 @@ title: Peripheral-specific properties for a SPI bus. description: Many SPI controllers need to add properties to peripheral devices. They could - be common properties like spi-max-frequency, spi-cpha, etc. or they could be - controller specific like delay in clock or data lines, etc. These properties - need to be defined in the peripheral node because they are per-peripheral and - there can be multiple peripherals attached to a controller. All those - properties are listed here. The controller specific properties should go in - their own separate schema that should be referenced from here. + be common properties like spi-max-frequency, spi-cs-high, etc. or they could + be controller specific like delay in clock or data lines, etc. These + properties need to be defined in the peripheral node because they are + per-peripheral and there can be multiple peripherals attached to a + controller. All those properties are listed here. The controller specific + properties should go in their own separate schema that should be referenced + from here. maintainers: - Mark Brown <broonie@kernel.org> @@ -49,6 +50,16 @@ properties: Delay in nanoseconds to be introduced by the controller after CS is asserted. + spi-cs-hold-delay-ns: + description: + Delay in nanoseconds to be introduced by the controller before CS is + de-asserted. + + spi-cs-inactive-delay-ns: + description: + Delay in nanoseconds to be introduced by the controller after CS is + de-asserted. + spi-rx-bus-width: description: Bus width to the SPI bus used for read transfers. @@ -103,9 +114,17 @@ properties: minItems: 2 maxItems: 4 + st,spi-midi-ns: + deprecated: true + description: | + Only for STM32H7, (Master Inter-Data Idleness) minimum time + delay in nanoseconds inserted between two consecutive data frames. + # The controller specific properties go here. allOf: + - $ref: arm,pl022-peripheral-props.yaml# - $ref: cdns,qspi-nor-peripheral-props.yaml# + - $ref: fsl,dspi-peripheral-props.yaml# - $ref: samsung,spi-peripheral-props.yaml# - $ref: nvidia,tegra210-quad-peripheral-props.yaml# |