diff options
Diffstat (limited to 'Documentation/devicetree/bindings/thermal/qcom-tsens.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 133 |
1 files changed, 80 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 99d9c526c0b6..3c5256b0cd9f 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -36,9 +36,16 @@ properties: - qcom,msm8974-tsens - const: qcom,tsens-v0_1 + - description: + v1 of TSENS without RPM which requires to be explicitly reset + and enabled in the driver. + enum: + - qcom,ipq5018-tsens + - description: v1 of TSENS items: - enum: + - qcom,msm8937-tsens - qcom,msm8956-tsens - qcom,msm8976-tsens - qcom,qcs404-tsens @@ -47,11 +54,18 @@ properties: - description: v2 of TSENS items: - enum: + - qcom,glymur-tsens + - qcom,kaanapali-tsens + - qcom,milos-tsens - qcom,msm8953-tsens - qcom,msm8996-tsens - qcom,msm8998-tsens - qcom,qcm2290-tsens + - qcom,qcs8300-tsens + - qcom,qcs615-tsens + - qcom,sa8255p-tsens - qcom,sa8775p-tsens + - qcom,sar2130p-tsens - qcom,sc7180-tsens - qcom,sc7280-tsens - qcom,sc8180x-tsens @@ -67,15 +81,19 @@ properties: - qcom,sm8450-tsens - qcom,sm8550-tsens - qcom,sm8650-tsens + - qcom,x1e80100-tsens - const: qcom,tsens-v2 - description: v2 of TSENS with combined interrupt enum: + - qcom,ipq5332-tsens + - qcom,ipq5424-tsens - qcom,ipq8074-tsens - description: v2 of TSENS with combined interrupt items: - enum: + - qcom,ipq6018-tsens - qcom,ipq9574-tsens - const: qcom,ipq8074-tsens @@ -207,6 +225,18 @@ properties: - const: s9_p2_backup - const: s10_p1_backup - const: s10_p2_backup + - minItems: 8 + items: + - const: mode + - const: base0 + - const: base1 + - pattern: '^tsens_sens[0-9]+_off$' + - pattern: '^tsens_sens[0-9]+_off$' + - pattern: '^tsens_sens[0-9]+_off$' + - pattern: '^tsens_sens[0-9]+_off$' + - pattern: '^tsens_sens[0-9]+_off$' + - pattern: '^tsens_sens[0-9]+_off$' + - pattern: '^tsens_sens[0-9]+_off$' "#qcom,sensors": description: @@ -217,23 +247,22 @@ properties: "#thermal-sensor-cells": const: 1 - description: - Number of cells required to uniquely identify the thermal sensors. Since - we have multiple sensors this is set to 1 required: - compatible - interrupts - interrupt-names - - "#thermal-sensor-cells" - "#qcom,sensors" allOf: + - $ref: thermal-sensor.yaml# + - if: properties: compatible: contains: enum: + - qcom,ipq5018-tsens - qcom,ipq8064-tsens - qcom,msm8960-tsens - qcom,tsens-v0_1 @@ -268,6 +297,8 @@ allOf: compatible: contains: enum: + - qcom,ipq5332-tsens + - qcom,ipq5424-tsens - qcom,ipq8074-tsens then: properties: @@ -283,6 +314,8 @@ allOf: compatible: contains: enum: + - qcom,ipq5332-tsens + - qcom,ipq5424-tsens - qcom,ipq8074-tsens - qcom,tsens-v0_1 - qcom,tsens-v1 @@ -292,32 +325,26 @@ allOf: required: - reg -additionalProperties: false +unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - // Example msm9860 based SoC (ipq8064): - gcc: clock-controller { - - /* ... */ - - tsens: thermal-sensor { - compatible = "qcom,ipq8064-tsens"; + thermal-sensor { + compatible = "qcom,ipq8064-tsens"; - nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; - nvmem-cell-names = "calib", "calib_backup"; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; - #qcom,sensors = <11>; - #thermal-sensor-cells = <1>; - }; + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; }; - | #include <dt-bindings/interrupt-controller/arm-gic.h> - // Example 1 (new calbiration data: for pre v1 IP): + // Example 1 (new calibration data: for pre v1 IP): thermal-sensor@4a9000 { compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; reg = <0x4a9000 0x1000>, /* TM */ @@ -349,66 +376,66 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 1 (legacy: for pre v1 IP): tsens1: thermal-sensor@4a9000 { - compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; - reg = <0x4a9000 0x1000>, /* TM */ - <0x4a8000 0x1000>; /* SROT */ + compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; - nvmem-cell-names = "calib", "calib_sel"; + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; + nvmem-cell-names = "calib", "calib_sel"; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; - #qcom,sensors = <5>; - #thermal-sensor-cells = <1>; + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; }; - | #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 2 (for any platform containing v1 of the TSENS IP): tsens2: thermal-sensor@4a9000 { - compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; - reg = <0x004a9000 0x1000>, /* TM */ - <0x004a8000 0x1000>; /* SROT */ + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_caldata>; - nvmem-cell-names = "calib"; + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "calib"; - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; - #qcom,sensors = <10>; - #thermal-sensor-cells = <1>; + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; }; - | #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 3 (for any platform containing v2 of the TSENS IP): tsens3: thermal-sensor@c263000 { - compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0xc263000 0x1ff>, - <0xc222000 0x1ff>; + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, + <0xc222000 0x1ff>; - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow", "critical"; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; - #qcom,sensors = <13>; - #thermal-sensor-cells = <1>; + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; }; - | #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 4 (for any IPQ8074 based SoC-s): tsens4: thermal-sensor@4a9000 { - compatible = "qcom,ipq8074-tsens"; - reg = <0x4a9000 0x1000>, - <0x4a8000 0x1000>; + compatible = "qcom,ipq8074-tsens"; + reg = <0x4a9000 0x1000>, + <0x4a8000 0x1000>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "combined"; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; - #qcom,sensors = <16>; - #thermal-sensor-cells = <1>; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; }; ... |