diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb/snps,dwc3.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 307 |
1 files changed, 11 insertions, 296 deletions
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 6d78048c4613..4380bb6fa2f0 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -15,18 +15,7 @@ description: compatible string. allOf: - - $ref: usb-drd.yaml# - - if: - properties: - dr_mode: - const: peripheral - - required: - - dr_mode - then: - $ref: usb.yaml# - else: - $ref: usb-xhci.yaml# + - $ref: snps,dwc3-common.yaml# properties: compatible: @@ -44,15 +33,15 @@ properties: It's either a single common DWC3 interrupt (dwc_usb3) or individual interrupts for the host, gadget and DRD modes. minItems: 1 - maxItems: 3 + maxItems: 4 interrupt-names: minItems: 1 - maxItems: 3 + maxItems: 4 oneOf: - const: dwc_usb3 - items: - enum: [host, peripheral, otg] + enum: [host, peripheral, otg, wakeup] clocks: description: @@ -73,293 +62,19 @@ properties: iommus: maxItems: 1 - usb-phy: - minItems: 1 - items: - - description: USB2/HS PHY - - description: USB3/SS PHY - - phys: - minItems: 1 - maxItems: 2 - - phy-names: + power-domains: + description: + The DWC3 has 2 power-domains. The power management unit (PMU) and + everything else. The PMU is typically always powered and may not have an + entry. minItems: 1 - maxItems: 2 items: - enum: - - usb2-phy - - usb3-phy + - description: Core + - description: Power management unit resets: minItems: 1 - snps,usb2-lpm-disable: - description: Indicate if we don't want to enable USB2 HW LPM for host - mode. - type: boolean - - snps,usb3_lpm_capable: - description: Determines if platform is USB3 LPM capable - type: boolean - - snps,usb2-gadget-lpm-disable: - description: Indicate if we don't want to enable USB2 HW LPM for gadget - mode. - type: boolean - - snps,dis-start-transfer-quirk: - description: - When set, disable isoc START TRANSFER command failure SW work-around - for DWC_usb31 version 1.70a-ea06 and prior. - type: boolean - - snps,disable_scramble_quirk: - description: - True when SW should disable data scrambling. Only really useful for FPGA - builds. - type: boolean - - snps,has-lpm-erratum: - description: True when DWC3 was configured with LPM Erratum enabled - type: boolean - - snps,lpm-nyet-threshold: - description: LPM NYET threshold - $ref: /schemas/types.yaml#/definitions/uint8 - - snps,u2exit_lfps_quirk: - description: Set if we want to enable u2exit lfps quirk - type: boolean - - snps,u2ss_inp3_quirk: - description: Set if we enable P3 OK for U2/SS Inactive quirk - type: boolean - - snps,req_p1p2p3_quirk: - description: - When set, the core will always request for P1/P2/P3 transition sequence. - type: boolean - - snps,del_p1p2p3_quirk: - description: - When set core will delay P1/P2/P3 until a certain amount of 8B10B errors - occur. - type: boolean - - snps,del_phy_power_chg_quirk: - description: When set core will delay PHY power change from P0 to P1/P2/P3. - type: boolean - - snps,lfps_filter_quirk: - description: When set core will filter LFPS reception. - type: boolean - - snps,rx_detect_poll_quirk: - description: - when set core will disable a 400us delay to start Polling LFPS after - RX.Detect. - type: boolean - - snps,tx_de_emphasis_quirk: - description: When set core will set Tx de-emphasis value - type: boolean - - snps,tx_de_emphasis: - description: - The value driven to the PHY is controlled by the LTSSM during USB3 - Compliance mode. - $ref: /schemas/types.yaml#/definitions/uint8 - enum: - - 0 # -6dB de-emphasis - - 1 # -3.5dB de-emphasis - - 2 # No de-emphasis - - snps,dis_u3_susphy_quirk: - description: When set core will disable USB3 suspend phy - type: boolean - - snps,dis_u2_susphy_quirk: - description: When set core will disable USB2 suspend phy - type: boolean - - snps,dis_enblslpm_quirk: - description: - When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal - to the PHY. - type: boolean - - snps,dis-u1-entry-quirk: - description: Set if link entering into U1 needs to be disabled - type: boolean - - snps,dis-u2-entry-quirk: - description: Set if link entering into U2 needs to be disabled - type: boolean - - snps,dis_rxdet_inp3_quirk: - description: - When set core will disable receiver detection in PHY P3 power state. - type: boolean - - snps,dis-u2-freeclk-exists-quirk: - description: - When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2 - PHY doesn't provide a free-running PHY clock. - type: boolean - - snps,dis-del-phy-power-chg-quirk: - description: - When set core will change PHY power from P0 to P1/P2/P3 without delay. - type: boolean - - snps,dis-tx-ipgap-linecheck-quirk: - description: When set, disable u2mac linestate check during HS transmit - type: boolean - - snps,parkmode-disable-ss-quirk: - description: - When set, all SuperSpeed bus instances in park mode are disabled. - type: boolean - - snps,dis_metastability_quirk: - description: - When set, disable metastability workaround. CAUTION! Use only if you are - absolutely sure of it. - type: boolean - - snps,dis-split-quirk: - description: - When set, change the way URBs are handled by the driver. Needed to - avoid -EPROTO errors with usbhid on some devices (Hikey 970). - type: boolean - - snps,gfladj-refclk-lpm-sel-quirk: - description: - When set, run the SOF/ITP counter based on ref_clk. - type: boolean - - snps,resume-hs-terminations: - description: - Fix the issue of HS terminations CRC error on resume by enabling this - quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end - of resume. This option is to support certain legacy ULPI PHYs. - type: boolean - - snps,is-utmi-l1-suspend: - description: - True when DWC3 asserts output signal utmi_l1_suspend_n, false when - asserts utmi_sleep_n. - type: boolean - - snps,hird-threshold: - description: HIRD threshold - $ref: /schemas/types.yaml#/definitions/uint8 - - snps,hsphy_interface: - description: - High-Speed PHY interface selection between UTMI+ and ULPI when the - DWC_USB3_HSPHY_INTERFACE has value 3. - $ref: /schemas/types.yaml#/definitions/uint8 - enum: [utmi, ulpi] - - snps,quirk-frame-length-adjustment: - description: - Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame - length adjustment when the fladj_30mhz_sdbnd signal is invalid or - incorrect. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 0x3f - - snps,ref-clock-period-ns: - description: - Value for REFCLKPER field of GUCTL register for reference clock period in - nanoseconds, when the hardware set default does not match the actual - clock. - - This binding is deprecated. Instead, provide an appropriate reference clock. - minimum: 8 - maximum: 62 - deprecated: true - - snps,rx-thr-num-pkt-prd: - description: - Periodic ESS RX packet threshold count (host mode only). Set this and - snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.4) to enable periodic ESS RX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,rx-max-burst-prd: - description: - Max periodic ESS RX burst size (host mode only). Set this and - snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.4) to enable periodic ESS RX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,tx-thr-num-pkt-prd: - description: - Periodic ESS TX packet threshold count (host mode only). Set this and - snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.3) to enable periodic ESS TX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,tx-max-burst-prd: - description: - Max periodic ESS TX burst size (host mode only). Set this and - snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.3) to enable periodic ESS TX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - tx-fifo-resize: - description: Determines if the TX fifos can be dynamically resized depending - on the number of IN endpoints used and if bursting is supported. This - may help improve bandwidth on platforms with higher system latencies, as - increased fifo space allows for the controller to prefetch data into its - internal memory. - type: boolean - - tx-fifo-max-num: - description: Specifies the max number of packets the txfifo resizing logic - can account for when higher endpoint bursting is used. (bMaxBurst > 6) The - higher the number, the more fifo space the txfifo resizing logic will - allocate for that endpoint. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 3 - - snps,incr-burst-type-adjustment: - description: - Value for INCR burst type of GSBUSCFG0 register, undefined length INCR - burst type enable and INCRx type. A single value means INCRX burst mode - enabled. If more than one value specified, undefined length INCR burst - type will be enabled with burst lengths utilized up to the maximum - of the values passed in this property. - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 1 - maxItems: 8 - uniqueItems: true - items: - enum: [1, 4, 8, 16, 32, 64, 128, 256] - - port: - $ref: /schemas/graph.yaml#/properties/port - description: - This port is used with the 'usb-role-switch' property to connect the - dwc3 to type C connector. - - wakeup-source: - $ref: /schemas/types.yaml#/definitions/flag - description: - Enable USB remote wakeup. - unevaluatedProperties: false required: |