summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/usb/usb251xb.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/usb/usb251xb.txt')
-rw-r--r--Documentation/devicetree/bindings/usb/usb251xb.txt89
1 files changed, 0 insertions, 89 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
deleted file mode 100644
index 1a934eab175e..000000000000
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-Microchip USB 2.0 Hi-Speed Hub Controller
-
-The device node for the configuration of a Microchip USB251x/xBi USB 2.0
-Hi-Speed Controller.
-
-Required properties :
- - compatible : Should be "microchip,usb251xb" or one of the specific types:
- "microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b",
- "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi",
- "microchip,usb2517", "microchip,usb2517i", "microchip,usb2422"
- - reg : I2C address on the selected bus (default is <0x2C>)
-
-Optional properties :
- - reset-gpios : Should specify the gpio for hub reset
- - vdd-supply : Should specify the phandle to the regulator supplying vdd
- - skip-config : Skip Hub configuration, but only send the USB-Attach command
- - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424)
- - product-id : Set USB Product ID of the hub (16 bit, default depends on type)
- - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3)
- - language-id : Set USB Language ID (16 bit, default is 0x0000)
- - manufacturer : Set USB Manufacturer string (max 31 characters long)
- - product : Set USB Product string (max 31 characters long)
- - serial : Set USB Serial string (max 31 characters long)
- - {bus,self}-powered : selects between self- and bus-powered operation
- (boolean, default is self-powered)
- - disable-hi-speed : disable USB Hi-Speed support (boolean)
- - {multi,single}-tt : selects between multi- and single-transaction-translator
- (boolean, default is multi-tt)
- - disable-eop : disable End of Packet generation in full-speed mode (boolean)
- - {ganged,individual}-sensing : select over-current sense type in self-powered
- mode (boolean, default is individual)
- - {ganged,individual}-port-switching : select port power switching mode
- (boolean, default is individual)
- - dynamic-power-switching : enable auto-switching from self- to bus-powered
- operation if the local power source is removed or unavailable (boolean)
- - oc-delay-us : Delay time (in microseconds) for filtering the over-current
- sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If
- an invalid value is given, the default is used instead.
- - compound-device : indicate the hub is part of a compound device (boolean)
- - port-mapping-mode : enable port mapping mode (boolean)
- - led-{usb,speed}-mode : led usb/speed indication mode selection
- (boolean, default is speed mode)
- - string-support : enable string descriptor support (required for manufacturer,
- product and serial string configuration)
- - non-removable-ports : Should specify the ports which have a non-removable
- device connected.
- - sp-disabled-ports : Specifies the ports which will be self-power disabled
- - bp-disabled-ports : Specifies the ports which will be bus-power disabled
- - sp-max-total-current-microamp: Specifies max current consumed by the hub
- from VBUS when operating in self-powered hub. It includes the hub
- silicon along with all associated circuitry including a permanently
- attached peripheral (range: 0 - 100000 uA, default 1000 uA)
- - bp-max-total-current-microamp: Specifies max current consumed by the hub
- from VBUS when operating in self-powered hub. It includes the hub
- silicon along with all associated circuitry including a permanently
- attached peripheral (range: 0 - 510000 uA, default 100000 uA)
- - sp-max-removable-current-microamp: Specifies max current consumed by the hub
- from VBUS when operating in self-powered hub. It includes the hub
- silicon along with all associated circuitry excluding a permanently
- attached peripheral (range: 0 - 100000 uA, default 1000 uA)
- - bp-max-removable-current-microamp: Specifies max current consumed by the hub
- from VBUS when operating in self-powered hub. It includes the hub
- silicon along with all associated circuitry excluding a permanently
- attached peripheral (range: 0 - 510000 uA, default 100000 uA)
- - power-on-time-ms : Specifies the time it takes from the time the host
- initiates the power-on sequence to a port until the port has adequate
- power. The value is given in ms in a 0 - 510 range (default is 100ms).
- - swap-dx-lanes : Specifies the ports which will swap the differential-pair
- (D+/D-), default is not-swapped.
-
-Examples:
- usb2512b@2c {
- compatible = "microchip,usb2512b";
- reg = <0x2c>;
- reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
-
- usb2514b@2c {
- compatible = "microchip,usb2514b";
- reg = <0x2c>;
- vendor-id = /bits/ 16 <0x0000>;
- product-id = /bits/ 16 <0x0000>;
- string-support;
- manufacturer = "Foo";
- product = "Foo-Bar";
- serial = "1234567890A";
- /* correct misplaced usb connectors on port 1,2 */
- swap-dx-lanes = <1 2>;
- };