summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.txt38
-rw-r--r--Documentation/devicetree/bindings/clock/vf610-clock.txt15
-rw-r--r--Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt23
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
4 files changed, 77 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index e935d7d4ac43..4e8b7df7fc62 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -74,3 +74,41 @@ Required root node properties:
i.MX6q generic board
Required root node properties:
- compatible = "fsl,imx6q";
+
+
+Freescale LS1021A Platform Device Tree Bindings
+------------------------------------------------
+
+Required root node compatible properties:
+ - compatible = "fsl,ls1021a";
+
+Freescale LS1021A SoC-specific Device Tree Bindings
+-------------------------------------------
+
+Freescale SCFG
+ SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+ Required properties:
+ - compatible: should be "fsl,ls1021a-scfg"
+ - reg: should contain base address and length of SCFG memory-mapped registers
+
+Example:
+ scfg: scfg@1570000 {
+ compatible = "fsl,ls1021a-scfg";
+ reg = <0x0 0x1570000 0x0 0x10000>;
+ };
+
+Freescale DCFG
+ DCFG is the device configuration unit, that provides general purpose
+configuration and status for the device. Such as setting the secondary
+core start address and release the secondary core from holdoff and startup.
+ Required properties:
+ - compatible: should be "fsl,ls1021a-dcfg"
+ - reg : should contain base address and length of DCFG memory-mapped registers
+
+Example:
+ dcfg: dcfg@1ee0000 {
+ compatible = "fsl,ls1021a-dcfg";
+ reg = <0x0 0x1ee0000 0x0 0x10000>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt
index c80863d344ac..63f9f1ac3439 100644
--- a/Documentation/devicetree/bindings/clock/vf610-clock.txt
+++ b/Documentation/devicetree/bindings/clock/vf610-clock.txt
@@ -5,6 +5,19 @@ Required properties:
- reg: Address and length of the register set
- #clock-cells: Should be <1>
+Optional properties:
+- clocks: list of clock identifiers which are external input clocks to the
+ given clock controller. Please refer the next section to find
+ the input clocks for a given controller.
+- clock-names: list of names of clocks which are exteral input clocks to the
+ given clock controller.
+
+Input clocks for top clock controller:
+ - sxosc (external crystal oscillator 32KHz, recommended)
+ - fxosc (external crystal oscillator 24MHz, recommended)
+ - audio_ext
+ - enet_ext
+
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
for the full list of VF610 clock IDs.
@@ -15,6 +28,8 @@ clks: ccm@4006b000 {
compatible = "fsl,vf610-ccm";
reg = <0x4006b000 0x1000>;
#clock-cells = <1>;
+ clocks = <&sxosc>, <&fxosc>;
+ clock-names = "sxosc", "fxosc";
};
uart1: serial@40028000 {
diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
new file mode 100644
index 000000000000..dc7c9bad63ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
@@ -0,0 +1,23 @@
+i.mx6 Poweroff Driver
+
+SNVS_LPCR in SNVS module can power off the whole system by pull
+PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC.
+If you don't want to use PMIC_ON_REQ as power on/off control,
+please set status='disabled' to disable this driver.
+
+Required Properties:
+-compatible: "fsl,sec-v4.0-poweroff"
+-reg: Specifies the physical address of the SNVS_LPCR register
+
+Example:
+ snvs@020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x020cc000 0x4000>;
+ .....
+ snvs_poweroff: snvs-poweroff@38 {
+ compatible = "fsl,sec-v4.0-poweroff";
+ reg = <0x38 0x4>;
+ };
+ }
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index bfbd93e06bae..8c4a0db062cd 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -147,6 +147,7 @@ st STMicroelectronics
ste ST-Ericsson
stericsson ST-Ericsson
synology Synology, Inc.
+tbs TBS Technologies
thine THine Electronics, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility