diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml | 53 |
1 files changed, 22 insertions, 31 deletions
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml index 4cb4b688612d..a8ccb5cb8d77 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml @@ -26,108 +26,99 @@ properties: wakeup-source: true - interrupts-extend: + interrupts: maxItems: 1 enable-gpios: description: A connection of the 'enable' gpio line. maxItems: 1 - ld-pulse-delay-us: + richtek,ld-pulse-delay-us: description: | load current pulse delay in microsecond after strobe pin pulse high. - $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 0 maximum: 100000 default: 0 - ld-pulse-width-us: + richtek,ld-pulse-width-us: description: | Load current pulse width in microsecond after strobe pin pulse high. - $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 0 maximum: 10000 default: 1200 - fsin1-delay-us: + richtek,fsin1-delay-us: description: | Fsin1 pulse high delay in microsecond after vsync signal pulse high. - $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 0 maximum: 100000 default: 23000 - fsin1-width-us: + richtek,fsin1-width-us: description: | Fsin1 pulse high width in microsecond after vsync signal pulse high. - $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 40 maximum: 10000 default: 160 - fsin2-delay-us: + richtek,fsin2-delay-us: description: | Fsin2 pulse high delay in microsecond after vsync signal pulse high. - $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 0 maximum: 100000 default: 23000 - fsin2-width-us: + richtek,fsin2-width-us: description: | Fsin2 pulse high width in microsecond after vsync signal pulse high. - $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 40 maximum: 10000 default: 160 - es-pulse-width-us: + richtek,es-pulse-width-us: description: Eye safety function pulse width limit in microsecond. - $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 0 maximum: 10000 default: 1200 - es-ld-current-microamp: + richtek,es-ld-current-microamp: description: Eye safety function load current limit in microamp. - $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 0 maximum: 6000000 default: 3000000 - lbp-level-microvolt: + richtek,lbp-level-microvolt: description: Low battery protection level in microvolt. - $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 2400000 maximum: 3700000 default: 2700000 - lbp-enable: + richtek,lbp-enable: description: Low battery protection function enable control. type: boolean - strobe-polarity-high: + richtek,strobe-polarity-high: description: Strobe pin active polarity control. type: boolean - vsync-polarity-high: + richtek,vsync-polarity-high: description: Vsync pin active polarity control. type: boolean - fsin-enable: + richtek,fsin-enable: description: Fsin function enable control. type: boolean - fsin-output: + richtek,fsin-output: description: Fsin function output control. type: boolean - es-enable: + richtek,es-enable: description: Eye safety function enable control. type: boolean -patternProperties: - "lsw": + lsw: + description: load switch current regulator description. type: object $ref: "regulator.yaml#" @@ -135,7 +126,7 @@ required: - compatible - reg - wakeup-source - - interrupts-extend + - interrupts - enable-gpios - lsw @@ -152,11 +143,11 @@ examples: compatible = "richtek,rtmv20"; reg = <0x34>; wakeup-source; - interrupts-extend = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>; enable-gpios = <&gpio26 3 0>; - strobe-polarity-high; - vsync-polarity-high; + richtek,strobe-polarity-high; + richtek,vsync-polarity-high; lsw { regulator-name = "rtmv20,lsw"; |