diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
| -rw-r--r-- | Documentation/devicetree/bindings/serial/serial-peripheral-props.yaml | 41 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/serial/serial.yaml | 23 |
2 files changed, 42 insertions, 22 deletions
diff --git a/Documentation/devicetree/bindings/serial/serial-peripheral-props.yaml b/Documentation/devicetree/bindings/serial/serial-peripheral-props.yaml new file mode 100644 index 000000000000..b4a73214d20d --- /dev/null +++ b/Documentation/devicetree/bindings/serial/serial-peripheral-props.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/serial-peripheral-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Serial-attached Devices + +maintainers: + - Rob Herring <robh@kernel.org> + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +description: + Devices connected over serial/UART, expressed as children of a serial + controller, might need similar properties, e.g. for configuring the baud + rate. + +properties: + max-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The maximum baud rate the device operates at. + This should only be present if the maximum is less than the slave + device can support. For example, a particular board has some + signal quality issue or the host processor can't support higher + baud rates. + + current-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The current baud rate the device operates at. + This should only be present in case a driver has no chance to know + the baud rate of the slave device. + Examples: + * device supports auto-baud + * the rate is setup by a bootloader and there is no way to reset + the device + * device baud rate is configured by its firmware but there is no + way to request the actual settings + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index 40e05dd37826..30c85768d980 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -93,6 +93,7 @@ patternProperties: type: object then: additionalProperties: true + $ref: serial-peripheral-props.yaml# description: Serial attached devices shall be a child node of the host UART device the slave device is attached to. It is expected that the attached @@ -104,28 +105,6 @@ patternProperties: description: Compatible of the device connected to the serial port. - max-speed: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - The maximum baud rate the device operates at. - This should only be present if the maximum is less than the slave - device can support. For example, a particular board has some - signal quality issue or the host processor can't support higher - baud rates. - - current-speed: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - The current baud rate the device operates at. - This should only be present in case a driver has no chance to know - the baud rate of the slave device. - Examples: - * device supports auto-baud - * the rate is setup by a bootloader and there is no way to reset - the device - * device baud rate is configured by its firmware but there is no - way to request the actual settings - required: - compatible |