diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
17 files changed, 429 insertions, 121 deletions
diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml index 4d69f79df859..62fcc2bd5d80 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml# +$id: http://devicetree.org/schemas/gpio/brcm,bcm63xx-gpio.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM6345 GPIO controller +title: Broadcom BCM63xx GPIO controller maintainers: - Álvaro Fernández Rojas <noltari@gmail.com> @@ -18,8 +18,6 @@ description: |+ BCM6338 have 8-bit data and dirout registers, where GPIO state can be read and/or written, and the direction changed from input to output. - BCM6345 have 16-bit data and dirout registers, where GPIO state can be read - and/or written, and the direction changed from input to output. BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data and dirout registers, where GPIO state can be read and/or written, and the direction changed from input to output. @@ -29,7 +27,6 @@ properties: enum: - brcm,bcm6318-gpio - brcm,bcm6328-gpio - - brcm,bcm6345-gpio - brcm,bcm6358-gpio - brcm,bcm6362-gpio - brcm,bcm6368-gpio @@ -64,17 +61,6 @@ additionalProperties: false examples: - | - gpio@fffe0406 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; - reg = <0xfffe0406 2>, <0xfffe040a 2>; - native-endian; - - gpio-controller; - #gpio-cells = <2>; - }; - - - | gpio@0 { compatible = "brcm,bcm63268-gpio"; reg-names = "dirout", "dat"; diff --git a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml new file mode 100644 index 000000000000..1cebc4058e27 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-delay.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO delay controller + +maintainers: + - Alexander Stein <linux@ew.tq-group.com> + +description: | + This binding describes an electrical setup where setting an GPIO output + is delayed by some external setup, e.g. RC circuit. + + +----------+ +-----------+ + | | VCC_B | | + | | | | | + | | VCC_A _ | | + | GPIO | | | R | Consumer | + |controller| ___ |_| | | + | | | | | | | + | [IOx|-------| |--+-----|-----+ | + | | |___| | | input | + | | | | | + +----------+ --- C +-----------+ + --- + | + - + GND + + If the input on the consumer is controlled by an open-drain signal + attached to an RC circuit the ramp-up delay is not under control + of the GPIO controller. + +properties: + compatible: + const: gpio-delay + + "#gpio-cells": + description: | + Specifies the pin, ramp-up and ramp-down delays. The + delays are specified in microseconds. + const: 3 + + gpios: + description: Array of GPIOs which output signal change is delayed + minItems: 1 + maxItems: 32 + + gpio-controller: true + + gpio-line-names: + minItems: 1 + maxItems: 32 + +required: + - compatible + - "#gpio-cells" + - gpio-controller + - gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + enable_delay: enable-delay { + compatible = "gpio-delay"; + #gpio-cells = <3>; + gpio-controller; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>, + <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + + consumer { + enable-gpios = <&enable_delay 0 130000 30000>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml new file mode 100644 index 000000000000..daadfb4926c3 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-ep9301.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EP93xx GPIO controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + - Bartosz Golaszewski <brgl@bgdev.pl> + - Nikita Shubin <nikita.shubin@maquefel.me> + +properties: + compatible: + oneOf: + - const: cirrus,ep9301-gpio + - items: + - enum: + - cirrus,ep9302-gpio + - cirrus,ep9307-gpio + - cirrus,ep9312-gpio + - cirrus,ep9315-gpio + - const: cirrus,ep9301-gpio + + reg: + minItems: 2 + items: + - description: data register + - description: direction register + - description: interrupt registers base + + reg-names: + minItems: 2 + items: + - const: data + - const: dir + - const: intr + + gpio-controller: true + + gpio-ranges: true + + "#gpio-cells": + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + oneOf: + - maxItems: 1 + - description: port F has dedicated irq line for each gpio line + maxItems: 8 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + gpio@80840000 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840000 0x04>, + <0x80840010 0x04>, + <0x80840090 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&vic1>; + interrupts = <27>; + }; + + gpio@80840004 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840004 0x04>, + <0x80840014 0x04>, + <0x808400ac 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&vic1>; + interrupts = <27>; + }; + + gpio@80840008 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840008 0x04>, + <0x80840018 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@8084000c { + compatible = "cirrus,ep9301-gpio"; + reg = <0x8084000c 0x04>, + <0x8084001c 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@80840020 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840020 0x04>, + <0x80840024 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@80840030 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840030 0x04>, + <0x80840034 0x04>, + <0x8084004c 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupts-extended = <&vic0 19>, <&vic0 20>, + <&vic0 21>, <&vic0 22>, + <&vic1 15>, <&vic1 16>, + <&vic1 17>, <&vic1 18>; + }; + + gpio@80840038 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840038 0x04>, + <0x8084003c 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@80840040 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840040 0x04>, + <0x80840044 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + +... diff --git a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml new file mode 100644 index 000000000000..b394e058256e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-mmio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic MMIO GPIO + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + - Bartosz Golaszewski <brgl@bgdev.pl> + +description: + Some simple GPIO controllers may consist of a single data register or a pair + of set/clear-bit registers. Such controllers are common for glue logic in + FPGAs or ASICs. Commonly, these controllers are accessed over memory-mapped + NAND-style parallel busses. + +properties: + compatible: + enum: + - brcm,bcm6345-gpio + - ni,169445-nand-gpio + - wd,mbl-gpio # Western Digital MyBook Live memory-mapped GPIO controller + + big-endian: true + + '#gpio-cells': + const: 2 + + gpio-controller: true + + little-endian: true + + reg: + minItems: 1 + description: + A list of registers in the controller. The width of each register is + determined by its size. All registers must have the same width. The number + of GPIOs is set by the width, with bit 0 corresponding to GPIO 0. + items: + - description: + Register to READ the value of the GPIO lines. If GPIO line is high, + the bit will be set. If the GPIO line is low, the bit will be cleared. + This register may also be used to drive GPIOs if the SET register is + omitted. + - description: + Register to SET the value of the GPIO lines. Setting a bit in this + register will drive the GPIO line high. + - description: + Register to CLEAR the value of the GPIO lines. Setting a bit in this + register will drive the GPIO line low. If this register is omitted, + the SET register will be used to clear the GPIO lines as well, by + actively writing the line with 0. + - description: + Register to set the line as OUTPUT. Setting a bit in this register + will turn that line into an output line. Conversely, clearing a bit + will turn that line into an input. + - description: + Register to set this line as INPUT. Setting a bit in this register + will turn that line into an input line. Conversely, clearing a bit + will turn that line into an output. + + reg-names: + minItems: 1 + maxItems: 5 + items: + enum: + - dat + - set + - clr + - dirout + - dirin + + native-endian: true + + no-output: + $ref: /schemas/types.yaml#/definitions/flag + description: + If this property is present, the controller cannot drive the GPIO lines. + +required: + - compatible + - reg + - reg-names + - '#gpio-cells' + - gpio-controller + +additionalProperties: false + +examples: + - | + gpio@1f300010 { + compatible = "ni,169445-nand-gpio"; + reg = <0x1f300010 0x4>; + reg-names = "dat"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@e0100000 { + compatible = "wd,mbl-gpio"; + reg-names = "dat"; + reg = <0xe0100000 0x1>; + #gpio-cells = <2>; + gpio-controller; + no-output; + }; + + gpio@fffe0406 { + compatible = "brcm,bcm6345-gpio"; + reg-names = "dirout", "dat"; + reg = <0xfffe0406 2>, <0xfffe040a 2>; + native-endian; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml index 5b0134304e51..452f8972a965 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml @@ -24,6 +24,10 @@ properties: '#gpio-cells': const: 2 + gpio-line-names: + minItems: 4 + maxItems: 8 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt deleted file mode 100644 index b33f8f02c0d7..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt +++ /dev/null @@ -1,17 +0,0 @@ -STMPE gpio ----------- - -Required properties: - - compatible: "st,stmpe-gpio" - -Optional properties: - - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable - due to different usage (e.g. touch, keypad) - -Node should be child node of stmpe node to which it belongs. - -Example: - stmpe_gpio { - compatible = "st,stmpe-gpio"; - st,norequest-mask = <0x20>; //gpio 5 can't be used - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml index d2c39dba56ad..7c2d152e8617 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml @@ -61,6 +61,13 @@ properties: gpio-ranges: maxItems: 1 +patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + + required: + - gpio-hog + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt b/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt deleted file mode 100644 index ca2f8c745a27..000000000000 --- a/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt +++ /dev/null @@ -1,38 +0,0 @@ -Bindings for the National Instruments 169445 GPIO NAND controller - -The 169445 GPIO NAND controller has two memory mapped GPIO registers, one -for input (the ready signal) and one for output (control signals). It is -intended to be used with the GPIO NAND driver. - -Required properties: - - compatible: should be "ni,169445-nand-gpio" - - reg-names: must contain - "dat" - data register - - reg: address + size pairs describing the GPIO register sets; - order must correspond with the order of entries in reg-names - - #gpio-cells: must be set to 2. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - - gpio-controller: Marks the device node as a gpio controller. - -Optional properties: - - no-output: disables driving output on the pins - -Examples: - gpio1: nand-gpio-out@1f300010 { - compatible = "ni,169445-nand-gpio"; - reg = <0x1f300010 0x4>; - reg-names = "dat"; - gpio-controller; - #gpio-cells = <2>; - }; - - gpio2: nand-gpio-in@1f300014 { - compatible = "ni,169445-nand-gpio"; - reg = <0x1f300014 0x4>; - reg-names = "dat"; - gpio-controller; - #gpio-cells = <2>; - no-output; - }; diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml new file mode 100644 index 000000000000..22c0cae73425 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/st,stmpe-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Port Expander (STMPE) GPIO Block + +description: + STMicroelectronics Port Expander (STMPE) is a series of slow + bus controllers for various expanded peripherals such as GPIO, keypad, + touchscreen, ADC, PWM or rotator. It can contain one or several different + peripherals connected to SPI or I2C. These bindings pertain to the + GPIO portions of these expanders. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + const: st,stmpe-gpio + + "#gpio-cells": + const: 2 + + "#interrupt-cells": + const: 2 + + gpio-controller: true + + interrupt-controller: true + + st,norequest-mask: + description: + A bitmask of GPIO lines that cannot be requested because for + for example not being connected to anything on the system + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + + required: + - gpio-hog + +additionalProperties: false + +required: + - compatible + - "#gpio-cells" + - "#interrupt-cells" + - gpio-controller + - interrupt-controller diff --git a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt b/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt deleted file mode 100644 index 038c3a6a1f4d..000000000000 --- a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt +++ /dev/null @@ -1,38 +0,0 @@ -Bindings for the Western Digital's MyBook Live memory-mapped GPIO controllers. - -The Western Digital MyBook Live has two memory-mapped GPIO controllers. -Both GPIO controller only have a single 8-bit data register, where GPIO -state can be read and/or written. - -Required properties: - - compatible: should be "wd,mbl-gpio" - - reg-names: must contain - "dat" - data register - - reg: address + size pairs describing the GPIO register sets; - order must correspond with the order of entries in reg-names - - #gpio-cells: must be set to 2. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - - gpio-controller: Marks the device node as a gpio controller. - -Optional properties: - - no-output: GPIOs are read-only. - -Examples: - gpio0: gpio0@e0000000 { - compatible = "wd,mbl-gpio"; - reg-names = "dat"; - reg = <0xe0000000 0x1>; - #gpio-cells = <2>; - gpio-controller; - }; - - gpio1: gpio1@e0100000 { - compatible = "wd,mbl-gpio"; - reg-names = "dat"; - reg = <0xe0100000 0x1>; - #gpio-cells = <2>; - gpio-controller; - no-output; - }; diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml index 31906c253940..1638cfe90f1c 100644 --- a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml @@ -44,6 +44,7 @@ patternProperties: - GPIO0 - GPIO1 - GPIO2 + - GPIO3 function: enum: diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml index 148f1da47603..9f9a14af875e 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml index 7e582243ea76..803277dd2725 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml index 2230848e11c3..b9a6856ce970 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml index c06693b6f7aa..4651fe4dde07 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml index c560bede0e37..0330b621fd38 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml index c534f5f2404e..82d3e4415bda 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node |