diff options
Diffstat (limited to 'Documentation/devicetree')
5 files changed, 0 insertions, 248 deletions
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt deleted file mode 100644 index 2632d3f13004..000000000000 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Samsung S3C2410 Clock Controller - -The S3C2410 clock controller generates and supplies clock to various controllers -within the SoC. The clock binding described here is applicable to the s3c2410, -s3c2440 and s3c2442 SoCs in the s3c24x family. - -Required Properties: - -- compatible: should be one of the following. - - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC. - - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC. - - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC. -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. Some of the clocks are available only -on a particular SoC. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/s3c2410.h header and can be used in device -tree sources. - -External clocks: - -The xti clock used as input for the plls is generated outside the SoC. It is -expected that is are defined using standard clock bindings with a -clock-output-names value of "xti". - -Example: Clock controller node: - - clocks: clock-controller@4c000000 { - compatible = "samsung,s3c2410-clock"; - reg = <0x4c000000 0x20>; - #clock-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller (refer to the standard clock bindings for information about - "clocks" and "clock-names" properties): - - serial@50004000 { - compatible = "samsung,s3c2440-uart"; - reg = <0x50004000 0x4000>; - interrupts = <1 23 3 4>, <1 23 4 4>; - clock-names = "uart", "clk_uart_baud2"; - clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>; - }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt deleted file mode 100644 index 21a8c23e658f..000000000000 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Samsung S3C2412 Clock Controller - -The S3C2412 clock controller generates and supplies clock to various controllers -within the SoC. The clock binding described here is applicable to the s3c2412 -and s3c2413 SoCs in the s3c24x family. - -Required Properties: - -- compatible: should be "samsung,s3c2412-clock" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. Some of the clocks are available only -on a particular SoC. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/s3c2412.h header and can be used in device -tree sources. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xti" - crystal input - required, - - "ext" - external clock source - optional, - -Example: Clock controller node: - - clocks: clock-controller@4c000000 { - compatible = "samsung,s3c2412-clock"; - reg = <0x4c000000 0x20>; - #clock-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller (refer to the standard clock bindings for information about - "clocks" and "clock-names" properties): - - serial@50004000 { - compatible = "samsung,s3c2412-uart"; - reg = <0x50004000 0x4000>; - interrupts = <1 23 3 4>, <1 23 4 4>; - clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; - clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, - <&clocks SCLK_UART>; - }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt deleted file mode 100644 index 985c0f574e9a..000000000000 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt +++ /dev/null @@ -1,55 +0,0 @@ -* Samsung S3C2443 Clock Controller - -The S3C2443 clock controller generates and supplies clock to various controllers -within the SoC. The clock binding described here is applicable to all SoCs in -the s3c24x family starting with the s3c2443. - -Required Properties: - -- compatible: should be one of the following. - - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC. - - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC. - - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC. -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. Some of the clocks are available only -on a particular SoC. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/s3c2443.h header and can be used in device -tree sources. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xti" - crystal input - required, - - "ext" - external clock source - optional, - - "ext_i2s" - external I2S clock - optional, - - "ext_uart" - external uart clock - optional, - -Example: Clock controller node: - - clocks: clock-controller@4c000000 { - compatible = "samsung,s3c2416-clock"; - reg = <0x4c000000 0x40>; - #clock-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller (refer to the standard clock bindings for information about - "clocks" and "clock-names" properties): - - serial@50004000 { - compatible = "samsung,s3c2440-uart"; - reg = <0x50004000 0x4000>; - interrupts = <1 23 3 4>, <1 23 4 4>; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, - <&clocks SCLK_UART>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt deleted file mode 100644 index c54c5a9a2a90..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt +++ /dev/null @@ -1,53 +0,0 @@ -Samsung S3C24XX Interrupt Controllers - -The S3C24XX SoCs contain a custom set of interrupt controllers providing a -varying number of interrupt sources. The set consists of a main- and sub- -controller and on newer SoCs even a second main controller. - -Required properties: -- compatible: Compatible property value should be "samsung,s3c2410-irq" - for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later. - -- reg: Physical base address of the controller and length of memory mapped - region. - -- interrupt-controller : Identifies the node as an interrupt controller - -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The value shall be 4 and interrupt descriptor shall - have the following format: - <ctrl_num parent_irq ctrl_irq type> - - ctrl_num contains the controller to use: - - 0 ... main controller - - 1 ... sub controller - - 2 ... second main controller on s3c2416 and s3c2450 - parent_irq contains the parent bit in the main controller and will be - ignored in main controllers - ctrl_irq contains the interrupt bit of the controller - type contains the trigger type to use - -Example: - - interrupt-controller@4a000000 { - compatible = "samsung,s3c2410-irq"; - reg = <0x4a000000 0x100>; - interrupt-controller; - #interrupt-cells=<4>; - }; - - [...] - - serial@50000000 { - compatible = "samsung,s3c2410-uart"; - reg = <0x50000000 0x4000>; - interrupt-parent = <&subintc>; - interrupts = <1 28 0 4>, <1 28 1 4>; - }; - - rtc@57000000 { - compatible = "samsung,s3c2410-rtc"; - reg = <0x57000000 0x100>; - interrupt-parent = <&intc>; - interrupts = <0 30 0 3>, <0 8 0 3>; - }; diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt deleted file mode 100644 index 5f68feb9f9d6..000000000000 --- a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt +++ /dev/null @@ -1,42 +0,0 @@ -* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings - -Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface -with external MMC, SD and SDIO storage mediums. - -This file documents differences between the core mmc properties described by -mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller -implementation. - -Required SoC Specific Properties: -- compatible: should be one of the following - - "samsung,s3c2410-sdi": for controllers compatible with s3c2410 - - "samsung,s3c2412-sdi": for controllers compatible with s3c2412 - - "samsung,s3c2440-sdi": for controllers compatible with s3c2440 -- reg: register location and length -- interrupts: mmc controller interrupt -- clocks: Should reference the controller clock -- clock-names: Should contain "sdi" - -Required Board Specific Properties: -- pinctrl-0: Should specify pin control groups used for this controller. -- pinctrl-names: Should contain only one value - "default". - -Optional Properties: -- bus-width: number of data lines (see mmc.txt) -- cd-gpios: gpio for card detection (see mmc.txt) -- wp-gpios: gpio for write protection (see mmc.txt) - -Example: - - mmc0: mmc@5a000000 { - compatible = "samsung,s3c2440-sdi"; - pinctrl-names = "default"; - pinctrl-0 = <&sdi_pins>; - reg = <0x5a000000 0x100000>; - interrupts = <0 0 21 3>; - clocks = <&clocks PCLK_SDI>; - clock-names = "sdi"; - bus-width = <4>; - cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>; - wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>; - }; |