diff options
Diffstat (limited to 'Documentation/devicetree')
| -rw-r--r-- | Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml | 16 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml | 135 |
2 files changed, 151 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml index e732255b9019..ae2eab4452dd 100644 --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml @@ -22,6 +22,8 @@ properties: - fsl,imx8mn-cm7 - fsl,imx8mp-cm7 - fsl,imx8mq-cm4 + - fsl,imx8qm-cm4 + - fsl,imx8qxp-cm4 - fsl,imx8ulp-cm33 - fsl,imx93-cm33 @@ -54,12 +56,26 @@ properties: minItems: 1 maxItems: 32 + power-domains: + maxItems: 8 + fsl,auto-boot: $ref: /schemas/types.yaml#/definitions/flag description: Indicate whether need to load the default firmware and start the remote processor automatically. + fsl,entry-address: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specify CPU entry address for SCU enabled processor. + + fsl,resource-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + This property is to specify the resource id of the remote processor in SoC + which supports SCFW + required: - compatible diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml new file mode 100644 index 000000000000..9f677367dd9f --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/xlnx,zynqmp-r5fss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx R5F processor subsystem + +maintainers: + - Ben Levinsky <ben.levinsky@amd.com> + - Tanmay Shah <tanmay.shah@amd.com> + +description: | + The Xilinx platforms include a pair of Cortex-R5F processors (RPU) for + real-time processing based on the Cortex-R5F processor core from ARM. + The Cortex-R5F processor implements the Arm v7-R architecture and includes a + floating-point unit that implements the Arm VFPv3 instruction set. + +properties: + compatible: + const: xlnx,zynqmp-r5fss + + xlnx,cluster-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: | + The RPU MPCore can operate in split mode (Dual-processor performance), Safety + lock-step mode(Both RPU cores execute the same code in lock-step, + clock-for-clock) or Single CPU mode (RPU core 0 is held in reset while + core 1 runs normally). The processor does not support dynamic configuration. + Switching between modes is only permitted immediately after a processor reset. + If set to 1 then lockstep mode and if 0 then split mode. + If set to 2 then single CPU mode. When not defined, default will be lockstep mode. + In summary, + 0: split mode + 1: lockstep mode (default) + 2: single cpu mode + +patternProperties: + "^r5f-[a-f0-9]+$": + type: object + description: | + The RPU is located in the Low Power Domain of the Processor Subsystem. + Each processor includes separate L1 instruction and data caches and + tightly coupled memories (TCM). System memory is cacheable, but the TCM + memory space is non-cacheable. + + Each RPU contains one 64KB memory and two 32KB memories that + are accessed via the TCM A and B port interfaces, for a total of 128KB + per processor. In lock-step mode, the processor has access to 256KB of + TCM memory. + + properties: + compatible: + const: xlnx,zynqmp-r5f + + power-domains: + maxItems: 1 + + mboxes: + minItems: 1 + items: + - description: mailbox channel to send data to RPU + - description: mailbox channel to receive data from RPU + + mbox-names: + minItems: 1 + items: + - const: tx + - const: rx + + sram: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 8 + items: + maxItems: 1 + description: | + phandles to one or more reserved on-chip SRAM regions. Other than TCM, + the RPU can execute instructions and access data from the OCM memory, + the main DDR memory, and other system memories. + + The regions should be defined as child nodes of the respective SRAM + node, and should be defined as per the generic bindings in + Documentation/devicetree/bindings/sram/sram.yaml + + memory-region: + description: | + List of phandles to the reserved memory regions associated with the + remoteproc device. This is variable and describes the memories shared with + the remote processor (e.g. remoteproc firmware and carveouts, rpmsg + vrings, ...). This reserved memory region will be allocated in DDR memory. + minItems: 1 + maxItems: 8 + items: + - description: region used for RPU firmware image section + - description: vdev buffer + - description: vring0 + - description: vring1 + additionalItems: true + + required: + - compatible + - power-domains + + unevaluatedProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + remoteproc { + compatible = "xlnx,zynqmp-r5fss"; + xlnx,cluster-mode = <1>; + + r5f-0 { + compatible = "xlnx,zynqmp-r5f"; + power-domains = <&zynqmp_firmware 0x7>; + memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>; + mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>; + mbox-names = "tx", "rx"; + }; + + r5f-1 { + compatible = "xlnx,zynqmp-r5f"; + power-domains = <&zynqmp_firmware 0x8>; + memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>; + mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>; + mbox-names = "tx", "rx"; + }; + }; +... |