diff options
Diffstat (limited to 'Documentation/driver-api/crypto/iaa/iaa-crypto.rst')
| -rw-r--r-- | Documentation/driver-api/crypto/iaa/iaa-crypto.rst | 109 |
1 files changed, 68 insertions, 41 deletions
diff --git a/Documentation/driver-api/crypto/iaa/iaa-crypto.rst b/Documentation/driver-api/crypto/iaa/iaa-crypto.rst index de587cf9cbed..8e50b900d51c 100644 --- a/Documentation/driver-api/crypto/iaa/iaa-crypto.rst +++ b/Documentation/driver-api/crypto/iaa/iaa-crypto.rst @@ -179,7 +179,9 @@ has the old 'iax' device naming in place) :: # configure wq1.0 - accel-config config-wq --group-id=0 --mode=dedicated --type=kernel --name="iaa_crypto" --device_name="crypto" iax1/wq1.0 + accel-config config-wq --group-id=0 --mode=dedicated --type=kernel --priority=10 --name="iaa_crypto" --driver-name="crypto" iax1/wq1.0 + + accel-config config-engine iax1/engine1.0 --group-id=0 # enable IAA device iax1 @@ -270,7 +272,7 @@ The available attributes are: echo async_irq > /sys/bus/dsa/drivers/crypto/sync_mode Async mode without interrupts (caller must poll) can be enabled by - writing 'async' to it:: + writing 'async' to it (please see Caveat):: echo async > /sys/bus/dsa/drivers/crypto/sync_mode @@ -281,6 +283,13 @@ The available attributes are: The default mode is 'sync'. + Caveat: since the only mechanism that iaa_crypto currently implements + for async polling without interrupts is via the 'sync' mode as + described earlier, writing 'async' to + '/sys/bus/dsa/drivers/crypto/sync_mode' will internally enable the + 'sync' mode. This is to ensure correct iaa_crypto behavior until true + async polling without interrupts is enabled in iaa_crypto. + .. _iaa_default_config: IAA Default Configuration @@ -321,33 +330,30 @@ driver will generate statistics which can be accessed in debugfs at:: # ls -al /sys/kernel/debug/iaa-crypto/ total 0 - drwxr-xr-x 2 root root 0 Mar 3 09:35 . - drwx------ 47 root root 0 Mar 3 09:35 .. - -rw-r--r-- 1 root root 0 Mar 3 09:35 max_acomp_delay_ns - -rw-r--r-- 1 root root 0 Mar 3 09:35 max_adecomp_delay_ns - -rw-r--r-- 1 root root 0 Mar 3 09:35 max_comp_delay_ns - -rw-r--r-- 1 root root 0 Mar 3 09:35 max_decomp_delay_ns - -rw-r--r-- 1 root root 0 Mar 3 09:35 stats_reset - -rw-r--r-- 1 root root 0 Mar 3 09:35 total_comp_bytes_out - -rw-r--r-- 1 root root 0 Mar 3 09:35 total_comp_calls - -rw-r--r-- 1 root root 0 Mar 3 09:35 total_decomp_bytes_in - -rw-r--r-- 1 root root 0 Mar 3 09:35 total_decomp_calls - -rw-r--r-- 1 root root 0 Mar 3 09:35 wq_stats - -Most of the above statisticss are self-explanatory. The wq_stats file -shows per-wq stats, a set for each iaa device and wq in addition to -some global stats:: + drwxr-xr-x 2 root root 0 Mar 3 07:55 . + drwx------ 53 root root 0 Mar 3 07:55 .. + -rw-r--r-- 1 root root 0 Mar 3 07:55 global_stats + -rw-r--r-- 1 root root 0 Mar 3 07:55 stats_reset + -rw-r--r-- 1 root root 0 Mar 3 07:55 wq_stats - # cat wq_stats +The global_stats file shows a set of global statistics collected since +the driver has been loaded or reset:: + + # cat global_stats global stats: - total_comp_calls: 100 - total_decomp_calls: 100 - total_comp_bytes_out: 22800 - total_decomp_bytes_in: 22800 + total_comp_calls: 4300 + total_decomp_calls: 4164 + total_sw_decomp_calls: 0 + total_comp_bytes_out: 5993989 + total_decomp_bytes_in: 5993989 total_completion_einval_errors: 0 total_completion_timeout_errors: 0 - total_completion_comp_buf_overflow_errors: 0 + total_completion_comp_buf_overflow_errors: 136 + +The wq_stats file shows per-wq stats, a set for each iaa device and wq +in addition to some global stats:: + # cat wq_stats iaa device: id: 1 n_wqs: 1 @@ -379,21 +385,36 @@ some global stats:: iaa device: id: 5 n_wqs: 1 - comp_calls: 100 - comp_bytes: 22800 - decomp_calls: 100 - decomp_bytes: 22800 + comp_calls: 1360 + comp_bytes: 1999776 + decomp_calls: 0 + decomp_bytes: 0 + wqs: + name: iaa_crypto + comp_calls: 1360 + comp_bytes: 1999776 + decomp_calls: 0 + decomp_bytes: 0 + + iaa device: + id: 7 + n_wqs: 1 + comp_calls: 2940 + comp_bytes: 3994213 + decomp_calls: 4164 + decomp_bytes: 5993989 wqs: name: iaa_crypto - comp_calls: 100 - comp_bytes: 22800 - decomp_calls: 100 - decomp_bytes: 22800 + comp_calls: 2940 + comp_bytes: 3994213 + decomp_calls: 4164 + decomp_bytes: 5993989 + ... -Writing 0 to 'stats_reset' resets all the stats, including the +Writing to 'stats_reset' resets all the stats, including the per-device and per-wq stats:: - # echo 0 > stats_reset + # echo 1 > stats_reset # cat wq_stats global stats: total_comp_calls: 0 @@ -457,7 +478,6 @@ Use the following commands to enable zswap:: # echo deflate-iaa > /sys/module/zswap/parameters/compressor # echo zsmalloc > /sys/module/zswap/parameters/zpool # echo 1 > /sys/module/zswap/parameters/enabled - # echo 0 > /sys/module/zswap/parameters/same_filled_pages_enabled # echo 100 > /proc/sys/vm/swappiness # echo never > /sys/kernel/mm/transparent_hugepage/enabled # echo 1 > /proc/sys/vm/overcommit_memory @@ -536,12 +556,20 @@ The below script automatically does that:: echo "End Disable IAA" + echo "Reload iaa_crypto module" + + rmmod iaa_crypto + modprobe iaa_crypto + + echo "End Reload iaa_crypto module" + # # configure iaa wqs and devices # echo "Configure IAA" for ((i = 1; i < ${num_iaa} * 2; i += 2)); do - accel-config config-wq --group-id=0 --mode=dedicated --size=128 --priority=10 --type=kernel --name="iaa_crypto" --driver_name="crypto" iax${i}/wq${i} + accel-config config-wq --group-id=0 --mode=dedicated --wq-size=128 --priority=10 --type=kernel --name="iaa_crypto" --driver-name="crypto" iax${i}/wq${i}.0 + accel-config config-engine iax${i}/engine${i}.0 --group-id=0 done echo "End Configure IAA" @@ -552,10 +580,10 @@ The below script automatically does that:: echo "Enable IAA" for ((i = 1; i < ${num_iaa} * 2; i += 2)); do - echo enable iaa iaa${i} - accel-config enable-device iaa${i} - echo enable wq iaa${i}/wq${i}.0 - accel-config enable-wq iaa${i}/wq${i}.0 + echo enable iaa iax${i} + accel-config enable-device iax${i} + echo enable wq iax${i}/wq${i}.0 + accel-config enable-wq iax${i}/wq${i}.0 done echo "End Enable IAA" @@ -599,7 +627,6 @@ the 'fixed' compression mode:: echo deflate-iaa > /sys/module/zswap/parameters/compressor echo zsmalloc > /sys/module/zswap/parameters/zpool echo 1 > /sys/module/zswap/parameters/enabled - echo 0 > /sys/module/zswap/parameters/same_filled_pages_enabled echo 100 > /proc/sys/vm/swappiness echo never > /sys/kernel/mm/transparent_hugepage/enabled |