diff options
Diffstat (limited to 'Documentation/hwmon/corsair-psu.rst')
| -rw-r--r-- | Documentation/hwmon/corsair-psu.rst | 24 |
1 files changed, 16 insertions, 8 deletions
diff --git a/Documentation/hwmon/corsair-psu.rst b/Documentation/hwmon/corsair-psu.rst index e8378e7a1d8c..2e99cfd556a0 100644 --- a/Documentation/hwmon/corsair-psu.rst +++ b/Documentation/hwmon/corsair-psu.rst @@ -15,9 +15,11 @@ Supported devices: Corsair HX850i - Corsair HX1000i + Corsair HX1000i (Legacy and Series 2023) - Corsair HX1200i + Corsair HX1200i (Legacy, Series 2023 and Series 2025) + + Corsair HX1500i (Legacy and Series 2023) Corsair RM550i @@ -38,7 +40,7 @@ This driver implements the sysfs interface for the Corsair PSUs with a HID proto interface of the HXi and RMi series. These power supplies provide access to a micro-controller with 2 attached temperature sensors, 1 fan rpm sensor, 4 sensors for volt levels, 4 sensors for -power usage and 4 sensors for current levels and addtional non-sensor information +power usage and 4 sensors for current levels and additional non-sensor information like uptimes. Sysfs entries @@ -67,6 +69,8 @@ power1_input Total power usage power2_input Power usage of the 12v psu rail power3_input Power usage of the 5v psu rail power4_input Power usage of the 3.3v psu rail +pwm1 PWM value, read only +pwm1_enable PWM mode, read only temp1_input Temperature of the psu vrm component temp1_crit Temperature max cirtical value of the psu vrm component temp2_input Temperature of the psu case @@ -76,18 +80,22 @@ temp2_crit Temperature max critical value of psu case Usage Notes ----------- -It is an USB HID device, so it is auto-detected and supports hot-swapping. +It is an USB HID device, so it is auto-detected, supports hot-swapping and +several devices at once. Flickering values in the rail voltage levels can be an indicator for a failing -PSU. The driver also provides some additional useful values via debugfs, which -do not fit into the hwmon class. +PSU. Accordingly to the default automatic fan speed plan the fan starts at about +30% of the wattage rating. If this does not happen, a fan failure is likely. The +driver also provides some additional useful values via debugfs, which do not fit +into the hwmon class. Debugfs entries --------------- ======================= ======================================================== -uptime Current uptime of the psu +ocpmode Single or multi rail mode of the PCIe power connectors +product Product name of the psu +uptime Session uptime of the psu uptime_total Total uptime of the psu vendor Vendor name of the psu -product Product name of the psu ======================= ======================================================== |