summaryrefslogtreecommitdiff
path: root/Documentation/i2c/slave-interface.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/i2c/slave-interface.rst')
-rw-r--r--Documentation/i2c/slave-interface.rst198
1 files changed, 198 insertions, 0 deletions
diff --git a/Documentation/i2c/slave-interface.rst b/Documentation/i2c/slave-interface.rst
new file mode 100644
index 000000000000..c769bd6a15bf
--- /dev/null
+++ b/Documentation/i2c/slave-interface.rst
@@ -0,0 +1,198 @@
+=====================================
+Linux I2C slave interface description
+=====================================
+
+by Wolfram Sang <wsa@sang-engineering.com> in 2014-15
+
+Linux can also be an I2C slave if the I2C controller in use has slave
+functionality. For that to work, one needs slave support in the bus driver plus
+a hardware independent software backend providing the actual functionality. An
+example for the latter is the slave-eeprom driver, which acts as a dual memory
+driver. While another I2C master on the bus can access it like a regular
+EEPROM, the Linux I2C slave can access the content via sysfs and handle data as
+needed. The backend driver and the I2C bus driver communicate via events. Here
+is a small graph visualizing the data flow and the means by which data is
+transported. The dotted line marks only one example. The backend could also
+use a character device, be in-kernel only, or something completely different::
+
+
+ e.g. sysfs I2C slave events I/O registers
+ +-----------+ v +---------+ v +--------+ v +------------+
+ | Userspace +........+ Backend +-----------+ Driver +-----+ Controller |
+ +-----------+ +---------+ +--------+ +------------+
+ | |
+ ----------------------------------------------------------------+-- I2C
+ --------------------------------------------------------------+---- Bus
+
+Note: Technically, there is also the I2C core between the backend and the
+driver. However, at this time of writing, the layer is transparent.
+
+
+User manual
+===========
+
+I2C slave backends behave like standard I2C clients. So, you can instantiate
+them as described in the document 'instantiating-devices'. The only difference
+is that i2c slave backends have their own address space. So, you have to add
+0x1000 to the address you would originally request. An example for
+instantiating the slave-eeprom driver from userspace at the 7 bit address 0x64
+on bus 1::
+
+ # echo slave-24c02 0x1064 > /sys/bus/i2c/devices/i2c-1/new_device
+
+Each backend should come with separate documentation to describe its specific
+behaviour and setup.
+
+
+Developer manual
+================
+
+First, the events which are used by the bus driver and the backend will be
+described in detail. After that, some implementation hints for extending bus
+drivers and writing backends will be given.
+
+
+I2C slave events
+----------------
+
+The bus driver sends an event to the backend using the following function::
+
+ ret = i2c_slave_event(client, event, &val)
+
+'client' describes the i2c slave device. 'event' is one of the special event
+types described hereafter. 'val' holds an u8 value for the data byte to be
+read/written and is thus bidirectional. The pointer to val must always be
+provided even if val is not used for an event, i.e. don't use NULL here. 'ret'
+is the return value from the backend. Mandatory events must be provided by the
+bus drivers and must be checked for by backend drivers.
+
+Event types:
+
+* I2C_SLAVE_WRITE_REQUESTED (mandatory)
+
+ 'val': unused
+
+ 'ret': always 0
+
+Another I2C master wants to write data to us. This event should be sent once
+our own address and the write bit was detected. The data did not arrive yet, so
+there is nothing to process or return. Wakeup or initialization probably needs
+to be done, though.
+
+* I2C_SLAVE_READ_REQUESTED (mandatory)
+
+ 'val': backend returns first byte to be sent
+
+ 'ret': always 0
+
+Another I2C master wants to read data from us. This event should be sent once
+our own address and the read bit was detected. After returning, the bus driver
+should transmit the first byte.
+
+* I2C_SLAVE_WRITE_RECEIVED (mandatory)
+
+ 'val': bus driver delivers received byte
+
+ 'ret': 0 if the byte should be acked, some errno if the byte should be nacked
+
+Another I2C master has sent a byte to us which needs to be set in 'val'. If 'ret'
+is zero, the bus driver should ack this byte. If 'ret' is an errno, then the byte
+should be nacked.
+
+* I2C_SLAVE_READ_PROCESSED (mandatory)
+
+ 'val': backend returns next byte to be sent
+
+ 'ret': always 0
+
+The bus driver requests the next byte to be sent to another I2C master in
+'val'. Important: This does not mean that the previous byte has been acked, it
+only means that the previous byte is shifted out to the bus! To ensure seamless
+transmission, most hardware requests the next byte when the previous one is
+still shifted out. If the master sends NACK and stops reading after the byte
+currently shifted out, this byte requested here is never used. It very likely
+needs to be sent again on the next I2C_SLAVE_READ_REQUEST, depending a bit on
+your backend, though.
+
+* I2C_SLAVE_STOP (mandatory)
+
+ 'val': unused
+
+ 'ret': always 0
+
+A stop condition was received. This can happen anytime and the backend should
+reset its state machine for I2C transfers to be able to receive new requests.
+
+
+Software backends
+-----------------
+
+If you want to write a software backend:
+
+* use a standard i2c_driver and its matching mechanisms
+* write the slave_callback which handles the above slave events
+ (best using a state machine)
+* register this callback via i2c_slave_register()
+
+Check the i2c-slave-eeprom driver as an example.
+
+
+Bus driver support
+------------------
+
+If you want to add slave support to the bus driver:
+
+* implement calls to register/unregister the slave and add those to the
+ struct i2c_algorithm. When registering, you probably need to set the i2c
+ slave address and enable slave specific interrupts. If you use runtime pm, you
+ should use pm_runtime_get_sync() because your device usually needs to be
+ powered on always to be able to detect its slave address. When unregistering,
+ do the inverse of the above.
+
+* Catch the slave interrupts and send appropriate i2c_slave_events to the backend.
+
+Note that most hardware supports being master _and_ slave on the same bus. So,
+if you extend a bus driver, please make sure that the driver supports that as
+well. In almost all cases, slave support does not need to disable the master
+functionality.
+
+Check the i2c-rcar driver as an example.
+
+
+About ACK/NACK
+--------------
+
+It is good behaviour to always ACK the address phase, so the master knows if a
+device is basically present or if it mysteriously disappeared. Using NACK to
+state being busy is troublesome. SMBus demands to always ACK the address phase,
+while the I2C specification is more loose on that. Most I2C controllers also
+automatically ACK when detecting their slave addresses, so there is no option
+to NACK them. For those reasons, this API does not support NACK in the address
+phase.
+
+Currently, there is no slave event to report if the master did ACK or NACK a
+byte when it reads from us. We could make this an optional event if the need
+arises. However, cases should be extremely rare because the master is expected
+to send STOP after that and we have an event for that. Also, keep in mind not
+all I2C controllers have the possibility to report that event.
+
+
+About buffers
+-------------
+
+During development of this API, the question of using buffers instead of just
+bytes came up. Such an extension might be possible, usefulness is unclear at
+this time of writing. Some points to keep in mind when using buffers:
+
+* Buffers should be opt-in and backend drivers will always have to support
+ byte-based transactions as the ultimate fallback anyhow because this is how
+ the majority of HW works.
+
+* For backends simulating hardware registers, buffers are largely not helpful
+ because after each byte written an action should be immediately triggered.
+ For reads, the data kept in the buffer might get stale if the backend just
+ updated a register because of internal processing.
+
+* A master can send STOP at any time. For partially transferred buffers, this
+ means additional code to handle this exception. Such code tends to be
+ error-prone.