diff options
Diffstat (limited to 'Documentation/input')
| -rw-r--r-- | Documentation/input/devices/amijoy.rst | 125 | ||||
| -rw-r--r-- | Documentation/input/devices/elantech.rst | 2 | ||||
| -rw-r--r-- | Documentation/input/input-programming.rst | 19 | ||||
| -rw-r--r-- | Documentation/input/input.rst | 2 |
4 files changed, 88 insertions, 60 deletions
diff --git a/Documentation/input/devices/amijoy.rst b/Documentation/input/devices/amijoy.rst index 8df7b11cd98d..a81e9de481c7 100644 --- a/Documentation/input/devices/amijoy.rst +++ b/Documentation/input/devices/amijoy.rst @@ -1,14 +1,15 @@ -~~~~~~~~~~~~~~~~~~~~~~~~~ -Amiga joystick extensions -~~~~~~~~~~~~~~~~~~~~~~~~~ +=============== +Amiga joysticks +=============== +Pinouts +======= -Amiga 4-joystick parport extension -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Amiga 4-joystick parallel port extension +---------------------------------------- Parallel port pins: - ===== ======== ==== ========== Pin Meaning Pin Meaning ===== ======== ==== ========== @@ -17,11 +18,11 @@ Pin Meaning Pin Meaning 4 Left1 8 Left2 5 Right1 9 Right2 13 Fire1 11 Fire2 -18 Gnd1 18 Gnd2 +19 Gnd1 18 Gnd2 ===== ======== ==== ========== -Amiga digital joystick pinout -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Amiga digital joystick +---------------------- === ============ Pin Meaning @@ -37,8 +38,8 @@ Pin Meaning 9 Thumb button === ============ -Amiga mouse pinout -~~~~~~~~~~~~~~~~~~ +Amiga mouse +----------- === ============ Pin Meaning @@ -54,8 +55,8 @@ Pin Meaning 9 Right button === ============ -Amiga analog joystick pinout -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Amiga analog joystick +--------------------- === ============== Pin Meaning @@ -71,8 +72,8 @@ Pin Meaning 9 Analog Y === ============== -Amiga lightpen pinout -~~~~~~~~~~~~~~~~~~~~~ +Amiga lightpen +-------------- === ============= Pin Meaning @@ -88,19 +89,23 @@ Pin Meaning 9 Stylus button === ============= -------------------------------------------------------------------------------- +Register addresses +================== + +JOY0DAT/JOY1DAT +--------------- -======== === ==== ==== ====== ======================================== +======== === ==== ==== ====== =========================================== NAME rev ADDR type chip Description -======== === ==== ==== ====== ======================================== -JOY0DAT 00A R Denise Joystick-mouse 0 data (left vert, horiz) -JOY1DAT 00C R Denise Joystick-mouse 1 data (right vert,horiz) -======== === ==== ==== ====== ======================================== +======== === ==== ==== ====== =========================================== +JOY0DAT 00A R Denise Joystick-mouse 0 data (left vert., horiz.) +JOY1DAT 00C R Denise Joystick-mouse 1 data (right vert., horiz.) +======== === ==== ==== ====== =========================================== These addresses each read a 16 bit register. These in turn are loaded from the MDAT serial stream and are clocked in on the rising edge of SCLK. MLD output is used to parallel load - the external parallel-to-serial converter.This in turn is + the external parallel-to-serial converter. This in turn is loaded with the 4 quadrature inputs from each of two game controller ports (8 total) plus 8 miscellaneous control bits which are new for LISA and can be read in upper 8 bits of @@ -108,7 +113,7 @@ JOY1DAT 00C R Denise Joystick-mouse 1 data (right vert,horiz) Register bits are as follows: - - Mouse counter usage (pins 1,3 =Yclock, pins 2,4 =Xclock) + - Mouse counter usage (pins 1,3 =Yclock, pins 2,4 =Xclock) ======== === === === === === === === === ====== === === === === === === === BIT# 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 @@ -123,7 +128,7 @@ JOY1DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0 clocked by 2 of the signals input from the mouse serial stream. Starting with first bit received: - +-------------------+-----------------------------------------+ + +--------+----------+-----------------------------------------+ | Serial | Bit Name | Description | +========+==========+=========================================+ | 0 | M0H | JOY0DAT Horizontal Clock | @@ -160,7 +165,8 @@ JOY1DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0 | Right | 4 | X1 | +------------+------+---------------------------------+ -------------------------------------------------------------------------------- +JOYTEST +------- ======== === ==== ==== ====== ================================================= NAME rev ADDR type chip Description @@ -177,14 +183,15 @@ JOYTEST 036 W Denise Write to all 4 joystick-mouse counters at once. JOYxDAT Y7 Y6 Y5 Y4 Y3 Y2 xx xx X7 X6 X5 X4 X3 X2 xx xx ========= === === === === === === === === ====== === === === === === === === -------------------------------------------------------------------------------- +POT0DAT/POT1DAT +--------------- -======= === ==== ==== ====== ======================================== +======= === ==== ==== ====== =========================================== NAME rev ADDR type chip Description -======= === ==== ==== ====== ======================================== -POT0DAT h 012 R Paula Pot counter data left pair (vert, horiz) -POT1DAT h 014 R Paula Pot counter data right pair (vert,horiz) -======= === ==== ==== ====== ======================================== +======= === ==== ==== ====== =========================================== +POT0DAT h 012 R Paula Pot counter data left pair (vert., horiz.) +POT1DAT h 014 R Paula Pot counter data right pair (vert., horiz.) +======= === ==== ==== ====== =========================================== These addresses each read a pair of 8 bit pot counters. (4 counters total). The bit assignment for both @@ -213,12 +220,13 @@ POT1DAT h 014 R Paula Pot counter data right pair (vert,horiz) +-------+------+-----+-----+-------+ With normal (NTSC or PAL) horiz. line rate, the pots will - give a full scale (FF) reading with about 500kohms in one - frame time. With proportionally faster horiz line times, + give a full scale (FF) reading with about 500k ohm in one + frame time. With proportionally faster horiz. line times, the counters will count proportionally faster. This should be noted when doing variable beam displays. -------------------------------------------------------------------------------- +POTGO +----- ====== === ==== ==== ====== ================================================ NAME rev ADDR type chip Description @@ -227,7 +235,8 @@ POTGO 034 W Paula Pot port (4 bit) bi-direction and data, and pot counter start. ====== === ==== ==== ====== ================================================ -------------------------------------------------------------------------------- +POTINP +------ ====== === ==== ==== ====== ================================================ NAME rev ADDR type chip Description @@ -238,26 +247,26 @@ POTINP 016 R Paula Pot pin data read This register controls a 4 bit bi-direction I/O port that shares the same 4 pins as the 4 pot counters above. - +-------+----------+---------------------------------------------+ - | BIT# | FUNCTION | DESCRIPTION | - +=======+==========+=============================================+ - | 15 | OUTRY | Output enable for Paula pin 33 | - +-------+----------+---------------------------------------------+ - | 14 | DATRY | I/O data Paula pin 33 | - +-------+----------+---------------------------------------------+ - | 13 | OUTRX | Output enable for Paula pin 32 | - +-------+----------+---------------------------------------------+ - | 12 | DATRX | I/O data Paula pin 32 | - +-------+----------+---------------------------------------------+ - | 11 | OUTLY | Out put enable for Paula pin 36 | - +-------+----------+---------------------------------------------+ - | 10 | DATLY | I/O data Paula pin 36 | - +-------+----------+---------------------------------------------+ - | 09 | OUTLX | Output enable for Paula pin 35 | - +-------+----------+---------------------------------------------+ - | 08 | DATLX | I/O data Paula pin 35 | - +-------+----------+---------------------------------------------+ - | 07-01 | X | Not used | - +-------+----------+---------------------------------------------+ - | 00 | START | Start pots (dump capacitors,start counters) | - +-------+----------+---------------------------------------------+ + +-------+----------+----------------------------------------------+ + | BIT# | FUNCTION | DESCRIPTION | + +=======+==========+==============================================+ + | 15 | OUTRY | Output enable for Paula pin 33 | + +-------+----------+----------------------------------------------+ + | 14 | DATRY | I/O data Paula pin 33 | + +-------+----------+----------------------------------------------+ + | 13 | OUTRX | Output enable for Paula pin 32 | + +-------+----------+----------------------------------------------+ + | 12 | DATRX | I/O data Paula pin 32 | + +-------+----------+----------------------------------------------+ + | 11 | OUTLY | Out put enable for Paula pin 36 | + +-------+----------+----------------------------------------------+ + | 10 | DATLY | I/O data Paula pin 36 | + +-------+----------+----------------------------------------------+ + | 09 | OUTLX | Output enable for Paula pin 35 | + +-------+----------+----------------------------------------------+ + | 08 | DATLX | I/O data Paula pin 35 | + +-------+----------+----------------------------------------------+ + | 07-01 | X | Not used | + +-------+----------+----------------------------------------------+ + | 00 | START | Start pots (dump capacitors, start counters) | + +-------+----------+----------------------------------------------+ diff --git a/Documentation/input/devices/elantech.rst b/Documentation/input/devices/elantech.rst index c3374a7ce7af..98163a258b83 100644 --- a/Documentation/input/devices/elantech.rst +++ b/Documentation/input/devices/elantech.rst @@ -556,7 +556,7 @@ Note on debounce: In case the box has unstable power supply or other electricity issues, or when number of finger changes, F/W would send "debounce packet" to inform driver that the hardware is in debounce status. -The debouce packet has the following signature:: +The debounce packet has the following signature:: byte 0: 0xc4 byte 1: 0xff diff --git a/Documentation/input/input-programming.rst b/Documentation/input/input-programming.rst index c9264814c7aa..2b3e6a34e34b 100644 --- a/Documentation/input/input-programming.rst +++ b/Documentation/input/input-programming.rst @@ -346,3 +346,22 @@ driver can handle these events, it has to set the respective bits in evbit, This callback routine can be called from an interrupt or a BH (although that isn't a rule), and thus must not sleep, and must not take too long to finish. + +Polled input devices +~~~~~~~~~~~~~~~~~~~~ + +Input polling is set up by passing an input device struct and a callback to +the function:: + + int input_setup_polling(struct input_dev *dev, + void (*poll_fn)(struct input_dev *dev)) + +Within the callback, devices should use the regular input_report_* functions +and input_sync as is used by other devices. + +There is also the function:: + + void input_set_poll_interval(struct input_dev *dev, unsigned int interval) + +which is used to configure the interval, in milliseconds, that the device will +be polled at. diff --git a/Documentation/input/input.rst b/Documentation/input/input.rst index 2c67fa904adc..d9a6de87d02d 100644 --- a/Documentation/input/input.rst +++ b/Documentation/input/input.rst @@ -264,7 +264,7 @@ events on a read. Their layout is:: struct timeval time; unsigned short type; unsigned short code; - unsigned int value; + int value; }; ``time`` is the timestamp, it returns the time at which the event happened. |